Aller au contenu

Folding@home: la Team INpact qui guérit la planète


Will.

Messages recommandés

Ce topic "qui montre comment guérir la planète" m'avait toujours intrigué mais je ne l'avais pas encore lu. C'est chose faite ('fin, les pages importantes quoi, pas les 622 ;)) et j'ai maintenant l'honneur de me joindre à vous :mdr: il me faut encore optimiser pour utiliser mes 2 c½urs et zzzouuu avance titine!

Lien vers le commentaire
Partager sur d’autres sites

1.J'ai un soucis avec Electron Microscope III filé avec les skins PCI, lors de le décompression Avast m'indique que le emjpg.dll est infecté par un cheval de Troie: TR/DM.A et ne donne aucune précision dessus. C'est un vrai cheval de Troie ou pas?

2. Pour tirer parti des dual core en mode console et le starter directement au démarrage, le tuto animé n'est pas tout à fait complet avec la dernière version j'imagine, et donc j'ai quelques questions:

pour le mettre en local, dans les paramètres avancés, il m'a proposé "additional client parameters" j'ai mis -local et il a indiqué "using local directory for work files" ---> ça suffira?

3. idem pour l'advms que le tuto fait modifier dans la base de registre, c'est l'option qui est demandée par "set - advmethods flag always, requesting...."?

4."using IP adress to bind core to(for viewer)" : j'ai zappé, je vois pas l'idée?

J'ai bon :oops:?

EDIT: A priori, c'est tout bon, j'ai deux services FAH qui tournent dès le démarrage, les deux cores à fond et... ça turbine sec!

Je vais devoir surélever mon portable en permanence si je veux le faire durer et garder un peu de silence. Avant je le faisais que lors de grosses parties de jeux/montage vidéo. Vu que j'ai du temps à tuer, je vais changer des boîtes de CDs pour surélever et faire quelques chose en dur, parce qu'a force :transpi:

question en sus: si je veux modifier des préfs par la suite (comme l'utilisation désirée du proc ou la taille désirée des WU) je fais comment

Lien vers le commentaire
Partager sur d’autres sites

UP pour ma question 1 et celle en sus:

1.J'ai un soucis avec Electron Microscope III filé avec les skins PCI, lors de le décompression Avast m'indique que le emjpg.dll est infecté par un cheval de Troie: TR/DM.A et ne donne aucune précision dessus. C'est un vrai cheval de Troie ou pas?

Sus: si je veux modifier des préfs par la suite (comme l'utilisation désirée du proc ou la taille désirée des WU) je fais comment?

Lien vers le commentaire
Partager sur d’autres sites

les serveurs pour les clents gpus sont'ils operationnels?

Ca va, ca vient ... :transpi:

1.J'ai un soucis avec Electron Microscope III filé avec les skins PCI, lors de le décompression Avast m'indique que le emjpg.dll est infecté par un cheval de Troie: TR/DM.A et ne donne aucune précision dessus. C'est un vrai cheval de Troie ou pas?

2. Pour tirer parti des dual core en mode console et le starter directement au démarrage, le tuto animé n'est pas tout à fait complet avec la dernière version j'imagine, et donc j'ai quelques questions:

pour le mettre en local, dans les paramètres avancés, il m'a proposé "additional client parameters" j'ai mis -local et il a indiqué "using local directory for work files" ---> ça suffira?

3. idem pour l'advms que le tuto fait modifier dans la base de registre, c'est l'option qui est demandée par "set - advmethods flag always, requesting...."?

4."using IP adress to bind core to(for viewer)" : j'ai zappé, je vois pas l'idée?

1. Le premier post du topic est antique ... EM3 n'est plus maintenu depuis longtemps (j'ai la même erreur sur antivir, mais ca doit être un faux positif, j'ai jamais eu de problèmes) ... je te conseille plutot Fahmon : http://www.fahmon.net

2. Le premier post du topic est vieux (oui je varie un peu) ... je te conseille de jeter un coup d'oeil à ce topic, il y a des tutos plus à jour : Aide au choix et à l'installation de votre logiciel folding@home

3. voir 2

4. voir 2 aussi ... mais tu peux laisser par défaut.

Lien vers le commentaire
Partager sur d’autres sites

j'ai un pb avec ma 8800GTS 320Mos,lorsque j'utilise le viewer (Display) folding_gpu, mais çà n'arrive que parfois. J'ai un freeze du PC suivi d'un BSOD avec mention de l'erreur 0x000000EA et du fichier nv4_disp, avec un court explicatif: "ce problème est dût a un pb matériel ou a une mauvaise programmation du pilote" !!

pilote 181.22, télécharger du site Nvidia pour mon GPU

déjà que mon GPU est en 1.0 CUDA! :-( je vais surement devoir changer de GPU!

quels sont les GPUs compatible au moins CUDA 2.0 ?

Lien vers le commentaire
Partager sur d’autres sites

oookaayy! J'ai pris Fahmon entre temps, c'est pas au look PCI mais ça fonctionne :)

Le reste ben heu, vu que pour l'instant ça avance bien (50% du boulot de fait) je vais attendre que la première WU soit terminée puis je verrai tout ça. C'est dommage que ce soit si fouilli et que le topic ici soit pas à jour (je sais, en même temps je retarde sévère .transpi.9, je suis passé à côté de la version SMP/CPU et c'est un joli binz pour l'installer quand même. Vu la WU en cours, j'installerai plus tard.

mode disciple ON

"che fert la fienfe et f'est ma joie maître"

Lien vers le commentaire
Partager sur d’autres sites

Einstein-Rosen-Podolsky> le viewer est à éviter, il est tout plein de bugs et bouffe des ressources inutilement ... parfois il marche, parfois non ... donc s'il marche pas sur ta machine, l'utilise pas :francais: Par contre si ca te le fait dans d'autres cas (avec les jeux ou FAH sans rien faire d'autre sur la machine), il faut s'inquiéter pour la santé de la carte :dd:

Après les version de CUDA on s'en fout un peu, FAH tourne sur tous les GPU de cette liste : http://www.nvidia.com/object/cuda_learn_products.html ... rien ne dit que dans l'avenir il n'y aura pas des versions optimisées pour des version plus récentes de CUDA, mais pour l'instant, ca me parait un peu irréaliste d'obliger tout le monde à changer de GPU :transpi:

Lien vers le commentaire
Partager sur d’autres sites

Hein ? ;)

Le mieux, c'est que tu nous montres un bout du FAHlog.txt ...

--- Opening Log file [May 21 15:19:00 UTC]

# Windows GPU Console Edition #################################################

###############################################################################

Folding@Home Client Version 6.23

http://folding.stanford.edu

###############################################################################

###############################################################################

Launch directory: C:\Documents and Settings\drtank\Application Data\Folding@home-gpu

[15:19:38] Opening http://fah-web.stanford.edu/cgi-bin/main.p...amp;teamnum=0...

[15:23:41] - Ask before connecting: No

[15:23:41] - User name: drtank (Team 51)

[15:23:41] - User ID not found locally

[15:23:41] + Requesting User ID from server

[15:23:41] - Machine ID: 2

[15:23:41]

[15:23:41] Work directory not found. Creating...

[15:23:41] Could not open work queue, generating new queue...

[15:23:42] Initialization complete

[15:23:42] - Preparing to get new work unit...

[15:23:42] + Attempting to get work packet

[15:23:42] - Connecting to assignment server

[15:23:42] - Successful: assigned to (171.64.65.102).

[15:23:42] + News From Folding@Home: Welcome to Folding@Home

[15:23:43] Loaded queue successfully.

[15:23:45] + Closed connections

[15:23:45]

[15:23:45] + Processing work unit

[15:23:45] Core required: FahCore_11.exe

[15:23:45] Core not found.

[15:23:45] - Core is not present or corrupted.

[15:23:45] - Attempting to download new core...

[15:23:45] + Downloading new core: FahCore_11.exe

[15:23:46] + 10240 bytes downloaded

[15:23:47] + 20480 bytes downloaded

[15:23:47] + 30720 bytes downloaded

[15:23:47] + 40960 bytes downloaded

[15:23:47] + 51200 bytes downloaded

[15:23:47] + 61440 bytes downloaded

[15:23:47] + 71680 bytes downloaded

[15:23:47] + 81920 bytes downloaded

[15:23:47] + 92160 bytes downloaded

[15:23:47] + 102400 bytes downloaded

[15:23:47] + 112640 bytes downloaded

[15:23:47] + 122880 bytes downloaded

[15:23:47] + 133120 bytes downloaded

[15:23:47] + 143360 bytes downloaded

[15:23:48] + 153600 bytes downloaded

[15:23:48] + 163840 bytes downloaded

[15:23:48] + 174080 bytes downloaded

[15:23:48] + 184320 bytes downloaded

[15:23:48] + 194560 bytes downloaded

[15:23:48] + 204800 bytes downloaded

[15:23:48] + 215040 bytes downloaded

[15:23:48] + 225280 bytes downloaded

[15:23:48] + 235520 bytes downloaded

[15:23:48] + 245760 bytes downloaded

[15:23:48] + 256000 bytes downloaded

[15:23:48] + 266240 bytes downloaded

[15:23:48] + 276480 bytes downloaded

[15:23:49] + 286720 bytes downloaded

[15:23:49] + 296960 bytes downloaded

[15:23:49] + 307200 bytes downloaded

[15:23:49] + 317440 bytes downloaded

[15:23:49] + 327680 bytes downloaded

[15:23:49] + 337920 bytes downloaded

[15:23:49] + 348160 bytes downloaded

[15:23:49] + 358400 bytes downloaded

[15:23:49] + 368640 bytes downloaded

[15:23:49] + 378880 bytes downloaded

[15:23:49] + 389120 bytes downloaded

[15:23:49] + 399360 bytes downloaded

[15:23:49] + 409600 bytes downloaded

[15:23:49] + 419840 bytes downloaded

[15:23:49] + 430080 bytes downloaded

[15:23:49] + 440320 bytes downloaded

[15:23:49] + 450560 bytes downloaded

[15:23:49] + 460800 bytes downloaded

[15:23:49] + 471040 bytes downloaded

[15:23:49] + 481280 bytes downloaded

[15:23:49] + 491520 bytes downloaded

[15:23:49] + 501760 bytes downloaded

[15:23:49] + 512000 bytes downloaded

[15:23:49] + 522240 bytes downloaded

[15:23:49] + 532480 bytes downloaded

[15:23:49] + 542720 bytes downloaded

[15:23:49] + 552960 bytes downloaded

[15:23:49] + 563200 bytes downloaded

[15:23:49] + 573440 bytes downloaded

[15:23:49] + 583680 bytes downloaded

[15:23:49] + 593920 bytes downloaded

[15:23:49] + 604160 bytes downloaded

[15:23:49] + 614400 bytes downloaded

[15:23:49] + 624640 bytes downloaded

[15:23:49] + 634880 bytes downloaded

[15:23:49] + 645120 bytes downloaded

[15:23:49] + 655360 bytes downloaded

[15:23:49] + 665600 bytes downloaded

[15:23:50] + 675840 bytes downloaded

[15:23:50] + 686080 bytes downloaded

[15:23:50] + 696320 bytes downloaded

[15:23:50] + 706560 bytes downloaded

[15:23:50] + 716800 bytes downloaded

[15:23:50] + 727040 bytes downloaded

[15:23:50] + 737280 bytes downloaded

[15:23:50] + 747520 bytes downloaded

[15:23:50] + 757760 bytes downloaded

[15:23:50] + 768000 bytes downloaded

[15:23:50] + 778240 bytes downloaded

[15:23:50] + 788480 bytes downloaded

[15:23:50] + 798720 bytes downloaded

[15:23:50] + 808960 bytes downloaded

[15:23:50] + 819200 bytes downloaded

[15:23:50] + 829440 bytes downloaded

[15:23:50] + 839680 bytes downloaded

[15:23:50] + 849920 bytes downloaded

[15:23:50] + 860160 bytes downloaded

[15:23:50] + 870400 bytes downloaded

[15:23:50] + 880640 bytes downloaded

[15:23:50] + 890880 bytes downloaded

[15:23:50] + 901120 bytes downloaded

[15:23:50] + 911360 bytes downloaded

[15:23:50] + 921600 bytes downloaded

[15:23:51] + 931840 bytes downloaded

[15:23:51] + 942080 bytes downloaded

[15:23:51] + 952320 bytes downloaded

[15:23:51] + 962560 bytes downloaded

[15:23:51] + 972800 bytes downloaded

[15:23:51] + 983040 bytes downloaded

[15:23:51] + 993280 bytes downloaded

[15:23:51] + 1003520 bytes downloaded

[15:23:51] + 1013760 bytes downloaded

[15:23:51] + 1024000 bytes downloaded

[15:23:51] + 1034240 bytes downloaded

[15:23:51] + 1044480 bytes downloaded

[15:23:51] + 1054720 bytes downloaded

[15:23:51] + 1064960 bytes downloaded

[15:23:51] + 1075200 bytes downloaded

[15:23:51] + 1085440 bytes downloaded

[15:23:51] + 1091180 bytes downloaded

[15:23:51] Verifying core Core_11.fah...

[15:23:51] Signature is VALID

[15:23:51]

[15:23:51] Trying to unzip core FahCore_11.exe

[15:23:52] Decompressed FahCore_11.exe (3203072 bytes) successfully

[15:23:57] + Core successfully engaged

[15:24:02]

[15:24:02] + Processing work unit

[15:24:02] Core required: FahCore_11.exe

[15:24:02] Core found.

[15:24:02] Working on queue slot 01 [May 21 15:24:02 UTC]

[15:24:02] + Working ...

[15:24:02]

[15:24:02] *------------------------------*

[15:24:02] Folding@Home GPU Core - Beta

[15:24:02] Version 1.24 (Mon Feb 9 11:00:12 PST 2009)

[15:24:02]

[15:24:02] Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

[15:24:02] Build host: amoeba

[15:24:02] Board Type: AMD

[15:24:02] Core :

[15:24:02] Preparing to commence simulation

[15:24:02] - Looking at optimizations...

[15:24:02] - Created dyn

[15:24:02] - Files status OK

[15:24:03] - Expanded 96709 -> 489152 (decompressed 505.7 percent)

[15:24:03] Called DecompressByteArray: compressed_data_size=96709 data_size=489152, decompressed_data_size=489152 diff=0

[15:24:03] - Digital signature verified

[15:24:03]

[15:24:03] Project: 5737 (Run 2, Clone 57, Gen 132)

[15:24:03]

[15:24:03] Assembly optimizations on if available.

[15:24:03] Entering M.D.

[15:24:09] Tpr hash work/wudata_01.tpr: 1212268075 2336867193 2105309161 3241176621 989632613

[15:24:09] Run: exception thrown during GuardedRun

[15:24:09] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

[15:24:09] Going to send back what have done -- stepsTotalG=0

[15:24:09] Work fraction=0.0000 steps=0.

[15:24:13] logfile size=5061 infoLength=5061 edr=0 trr=23

[15:24:13] - Writing 5597 bytes of core data to disk...

[15:24:13] Done: 5085 -> 1904 (compressed to 37.4 percent)

[15:24:13] ... Done.

[15:24:13]

[15:24:13] Folding@home Core Shutdown: UNSTABLE_MACHINE

[15:24:16] CoreStatus = 7A (122)

[15:24:16] Sending work to server

[15:24:16] Project: 5737 (Run 2, Clone 57, Gen 132)

[15:24:16] + Attempting to send results [May 21 15:24:16 UTC]

[15:24:17] + Results successfully sent

[15:24:17] Thank you for your contribution to Folding@Home.

[15:24:21] - Preparing to get new work unit...

[15:24:21] + Attempting to get work packet

[15:24:21] - Connecting to assignment server

[15:24:22] - Successful: assigned to (171.64.65.102).

[15:24:22] + News From Folding@Home: Welcome to Folding@Home

[15:24:22] Loaded queue successfully.

[15:24:26] + Closed connections

[15:24:31]

[15:24:31] + Processing work unit

[15:24:31] Core required: FahCore_11.exe

[15:24:31] Core found.

[15:24:31] Working on queue slot 02 [May 21 15:24:31 UTC]

[15:24:31] + Working ...

[15:24:31]

[15:24:31] *------------------------------*

[15:24:31] Folding@Home GPU Core - Beta

[15:24:31] Version 1.24 (Mon Feb 9 11:00:12 PST 2009)

[15:24:31]

[15:24:31] Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

[15:24:31] Build host: amoeba

[15:24:31] Board Type: AMD

[15:24:31] Core :

[15:24:31] Preparing to commence simulation

[15:24:31] - Looking at optimizations...

[15:24:31] - Created dyn

[15:24:31] - Files status OK

[15:24:31] - Expanded 96562 -> 489152 (decompressed 506.5 percent)

[15:24:31] Called DecompressByteArray: compressed_data_size=96562 data_size=489152, decompressed_data_size=489152 diff=0

[15:24:31] - Digital signature verified

[15:24:31]

[15:24:31] Project: 5737 (Run 3, Clone 67, Gen 77)

[15:24:31]

[15:24:31] Assembly optimizations on if available.

[15:24:31] Entering M.D.

[15:24:37] Tpr hash work/wudata_02.tpr: 3149661013 2160999720 749957408 1282460242 202965334

[15:24:38] Run: exception thrown during GuardedRun

[15:24:38] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

[15:24:38] Going to send back what have done -- stepsTotalG=0

[15:24:38] Work fraction=0.0000 steps=0.

[15:24:42] logfile size=5061 infoLength=5061 edr=0 trr=23

[15:24:42] - Writing 5597 bytes of core data to disk...

[15:24:42] Done: 5085 -> 1902 (compressed to 37.4 percent)

[15:24:42] ... Done.

[15:24:42]

[15:24:42] Folding@home Core Shutdown: UNSTABLE_MACHINE

[15:24:46] CoreStatus = 7A (122)

[15:24:46] Sending work to server

[15:24:46] Project: 5737 (Run 3, Clone 67, Gen 77)

[15:24:46] + Attempting to send results [May 21 15:24:46 UTC]

[15:24:46] + Results successfully sent

[15:24:46] Thank you for your contribution to Folding@Home.

[15:24:50] - Preparing to get new work unit...

[15:24:50] + Attempting to get work packet

[15:24:50] - Connecting to assignment server

[15:24:51] - Successful: assigned to (171.64.65.102).

[15:24:51] + News From Folding@Home: Welcome to Folding@Home

[15:24:51] Loaded queue successfully.

[15:24:53] + Closed connections

[15:24:58]

[15:24:58] + Processing work unit

[15:24:58] Core required: FahCore_11.exe

[15:24:58] Core found.

[15:24:58] Working on queue slot 03 [May 21 15:24:58 UTC]

[15:24:58] + Working ...

[15:24:58]

[15:24:58] *------------------------------*

[15:24:58] Folding@Home GPU Core - Beta

[15:24:58] Version 1.24 (Mon Feb 9 11:00:12 PST 2009)

[15:24:58]

[15:24:58] Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

[15:24:58] Build host: amoeba

[15:24:58] Board Type: AMD

[15:24:58] Core :

[15:24:58] Preparing to commence simulation

[15:24:58] - Looking at optimizations...

[15:24:58] - Created dyn

[15:24:58] - Files status OK

[15:24:58] - Expanded 68515 -> 357580 (decompressed 521.9 percent)

[15:24:58] Called DecompressByteArray: compressed_data_size=68515 data_size=357580, decompressed_data_size=357580 diff=0

[15:24:58] - Digital signature verified

[15:24:58]

[15:24:58] Project: 5744 (Run 4, Clone 93, Gen 28)

[15:24:58]

[15:24:58] Assembly optimizations on if available.

[15:24:58] Entering M.D.

[15:25:04] Tpr hash work/wudata_03.tpr: 2680209548 1278479023 1592018308 1002745817 3590523668

[15:25:05] Run: exception thrown during GuardedRun

[15:25:05] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

[15:25:05] Going to send back what have done -- stepsTotalG=0

[15:25:05] Work fraction=0.0000 steps=0.

[15:25:09] logfile size=5058 infoLength=5058 edr=0 trr=23

[15:25:09] - Writing 5594 bytes of core data to disk...

[15:25:09] Done: 5082 -> 1897 (compressed to 37.3 percent)

[15:25:09] ... Done.

[15:25:09]

[15:25:09] Folding@home Core Shutdown: UNSTABLE_MACHINE

[15:25:13] CoreStatus = 7A (122)

[15:25:13] Sending work to server

[15:25:13] Project: 5744 (Run 4, Clone 93, Gen 28)

[15:25:13] + Attempting to send results [May 21 15:25:13 UTC]

[15:25:13] + Results successfully sent

[15:25:13] Thank you for your contribution to Folding@Home.

[15:25:17] - Preparing to get new work unit...

[15:25:17] + Attempting to get work packet

[15:25:17] - Connecting to assignment server

[15:25:18] - Successful: assigned to (171.64.65.102).

[15:25:18] + News From Folding@Home: Welcome to Folding@Home

[15:25:18] Loaded queue successfully.

[15:25:21] + Closed connections

[15:25:26]

[15:25:26] + Processing work unit

[15:25:26] Core required: FahCore_11.exe

[15:25:26] Core found.

[15:25:26] Working on queue slot 04 [May 21 15:25:26 UTC]

[15:25:26] + Working ...

[15:25:26]

[15:25:26] *------------------------------*

[15:25:26] Folding@Home GPU Core - Beta

[15:25:26] Version 1.24 (Mon Feb 9 11:00:12 PST 2009)

[15:25:26]

[15:25:26] Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

[15:25:26] Build host: amoeba

[15:25:26] Board Type: AMD

[15:25:26] Core :

[15:25:26] Preparing to commence simulation

[15:25:26] - Looking at optimizations...

[15:25:26] - Created dyn

[15:25:26] - Files status OK

[15:25:26] - Expanded 98565 -> 492188 (decompressed 499.3 percent)

[15:25:26] Called DecompressByteArray: compressed_data_size=98565 data_size=492188, decompressed_data_size=492188 diff=0

[15:25:26] - Digital signature verified

[15:25:26]

[15:25:26] Project: 5735 (Run 2, Clone 32, Gen 180)

[15:25:26]

[15:25:26] Assembly optimizations on if available.

[15:25:26] Entering M.D.

[15:25:32] Tpr hash work/wudata_04.tpr: 3945980370 4038353969 2101271605 1950916859 3777650118

[15:25:32] Run: exception thrown during GuardedRun

[15:25:32] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

[15:25:32] Going to send back what have done -- stepsTotalG=0

[15:25:32] Work fraction=0.0000 steps=0.

[15:25:36] CoreStatus = 62 (98)

[15:25:36] + Restarting core (settings changed)

[15:25:36]

[15:25:36] + Processing work unit

[15:25:36] Core required: FahCore_11.exe

[15:25:36] Core found.

[15:25:36] Working on queue slot 04 [May 21 15:25:36 UTC]

[15:25:36] + Working ...

[15:25:36]

[15:25:36] *------------------------------*

[15:25:36] Folding@Home GPU Core - Beta

[15:25:36] Version 1.24 (Mon Feb 9 11:00:12 PST 2009)

[15:25:36]

[15:25:36] Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

[15:25:36] Build host: amoeba

[15:25:36] Board Type: AMD

[15:25:36] Core :

[15:25:36] Preparing to commence simulation

[15:25:36] - Ensuring status. Please wait.

[15:25:45] - Looking at optimizations...

[15:25:45] - Not checking prior termination.

[15:25:45] - Expanded 98565 -> 492188 (decompressed 499.3 percent)

[15:25:45] Called DecompressByteArray: compressed_data_size=98565 data_size=492188, decompressed_data_size=492188 diff=0

[15:25:45] - Digital signature verified

[15:25:45]

[15:25:45] Project: 5735 (Run 2, Clone 32, Gen 180)

[15:25:45]

[15:25:45] Assembly optimizations on if available.

[15:25:45] Entering M.D.

[15:25:51] Tpr hash work/wudata_04.tpr: 3945980370 4038353969 2101271605 1950916859 3777650118

[15:25:52] Run: exception thrown during GuardedRun

[15:25:52] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

[15:25:52] Going to send back what have done -- stepsTotalG=0

[15:25:52] Work fraction=0.0000 steps=0.

[15:25:56] logfile size=5060 infoLength=5060 edr=0 trr=23

[15:25:56] - Writing 5596 bytes of core data to disk...

[15:25:56] Done: 5084 -> 1906 (compressed to 37.4 percent)

[15:25:56] ... Done.

[15:25:56]

[15:25:56] Folding@home Core Shutdown: UNSTABLE_MACHINE

[15:25:58] CoreStatus = 7A (122)

[15:25:58] Sending work to server

[15:25:58] Project: 5735 (Run 2, Clone 32, Gen 180)

[15:25:58] + Attempting to send results [May 21 15:25:58 UTC]

[15:25:59] + Results successfully sent

[15:25:59] Thank you for your contribution to Folding@Home.

[15:26:03] - Preparing to get new work unit...

[15:26:03] + Attempting to get work packet

[15:26:03] - Connecting to assignment server

[15:26:04] - Successful: assigned to (171.64.65.102).

[15:26:04] + News From Folding@Home: Welcome to Folding@Home

[15:26:04] Loaded queue successfully.

[15:26:06] + Closed connections

[15:26:11]

[15:26:11] + Processing work unit

[15:26:11] Core required: FahCore_11.exe

[15:26:11] Core found.

[15:26:11] Working on queue slot 05 [May 21 15:26:11 UTC]

[15:26:11] + Working ...

[15:26:11]

[15:26:11] *------------------------------*

[15:26:11] Folding@Home GPU Core - Beta

[15:26:11] Version 1.24 (Mon Feb 9 11:00:12 PST 2009)

[15:26:11]

[15:26:11] Compiler : Microsoft ® 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86

[15:26:11] Build host: amoeba

[15:26:11] Board Type: AMD

[15:26:11] Core :

[15:26:11] Preparing to commence simulation

[15:26:11] - Looking at optimizations...

[15:26:11] - Created dyn

[15:26:11] - Files status OK

[15:26:11] - Expanded 68560 -> 357580 (decompressed 521.5 percent)

[15:26:11] Called DecompressByteArray: compressed_data_size=68560 data_size=357580, decompressed_data_size=357580 diff=0

[15:26:11] - Digital signature verified

[15:26:11]

[15:26:11] Project: 5747 (Run 3, Clone 3, Gen 247)

[15:26:11]

[15:26:11] Assembly optimizations on if available.

[15:26:11] Entering M.D.

[15:26:17] Opening http://fah-web.stanford.edu/cgi-bin/main.p...mp;teamnum=51...

[15:26:17] Tpr hash work/wudata_05.tpr: 143325115 2628871447 3971887983 4050584856 2452680673

[15:26:18] Run: exception thrown during GuardedRun

[15:26:18] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.

[15:26:18] Going to send back what have done -- stepsTotalG=0

[15:26:18] Work fraction=0.0000 steps=0.

[15:26:22] logfile size=5061 infoLength=5061 edr=0 trr=23

[15:26:22] - Writing 5597 bytes of core data to disk...

[15:26:22] Done: 5085 -> 1907 (compressed to 37.5 percent)

[15:26:22] ... Done.

[15:26:22]

[15:26:22] Folding@home Core Shutdown: UNSTABLE_MACHINE

[15:26:25] CoreStatus = 7A (122)

[15:26:25] Sending work to server

[15:26:25] Project: 5747 (Run 3, Clone 3, Gen 247)

[15:26:25] + Attempting to send results [May 21 15:26:25 UTC]

[15:26:26] + Results successfully sent

[15:26:26] Thank you for your contribution to Folding@Home.

[15:26:30] EUE limit exceeded. Pausing 24 hours.

[18:44:24] Opening http://fah-web.stanford.edu/cgi-bin/main.p...ername=drtank...

[21:03:12] Opening C:\Documents and Settings\drtank\Application Data\Folding@home-gpu\MyFolding.html...

[21:23:42] + Working...

[03:23:42] + Working...

[09:23:42] + Working...

[10:54:02] Opening C:\Documents and Settings\drtank\Application Data\Folding@home-gpu\MyFolding.html...

[10:55:21] Printing Queue Information

Current Queue:

Slot 06 Empty/Deleted

Slot 07 Empty/Deleted

Slot 08 Empty/Deleted

Slot 09 Empty/Deleted

Slot 00 Empty/Deleted

Slot 01 Empty/Deleted

Project: 5737 (Run 2, Clone 57, Gen 132), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:23:45

Finished date: May 21 15:24:16

Slot 02 Empty/Deleted

Project: 5737 (Run 3, Clone 67, Gen 77), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:24:26

Finished date: May 21 15:24:46

Slot 03 Empty/Deleted

Project: 5744 (Run 4, Clone 93, Gen 28), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:24:53

Finished date: May 21 15:25:13

Slot 04 Empty/Deleted

Project: 5735 (Run 2, Clone 32, Gen 180), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:25:21

Finished date: May 21 15:25:58

Slot 05 *Empty/Deleted

Project: 5747 (Run 3, Clone 3, Gen 247), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:26:06

Finished date: May 21 15:26:25

PF: 0.000000 based on last 0 slot(s)

[11:05:27] Opening C:\Documents and Settings\drtank\Application Data\Folding@home-gpu\MyFolding.html...

[11:08:04] Printing Queue Information

Current Queue:

Slot 06 Empty/Deleted

Slot 07 Empty/Deleted

Slot 08 Empty/Deleted

Slot 09 Empty/Deleted

Slot 00 Empty/Deleted

Slot 01 Empty/Deleted

Project: 5737 (Run 2, Clone 57, Gen 132), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:23:45

Finished date: May 21 15:24:16

Slot 02 Empty/Deleted

Project: 5737 (Run 3, Clone 67, Gen 77), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:24:26

Finished date: May 21 15:24:46

Slot 03 Empty/Deleted

Project: 5744 (Run 4, Clone 93, Gen 28), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:24:53

Finished date: May 21 15:25:13

Slot 04 Empty/Deleted

Project: 5735 (Run 2, Clone 32, Gen 180), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:25:21

Finished date: May 21 15:25:58

Slot 05 *Empty/Deleted

Project: 5747 (Run 3, Clone 3, Gen 247), Core: 11

Work server: 171.64.65.102:8080

Collection server: 171.67.108.17

Download date: May 21 15:26:06

Finished date: May 21 15:26:25

PF: 0.000000 based on last 0 slot(s)

[15:24:27] + Working...

[15:27:15] - Preparing to get new work unit...

[15:27:15] - Presenting message box asking to network.

[15:27:20] + Attempting to get work packet

[15:27:20] - Connecting to assignment server

[15:27:20] - Couldn't send HTTP request to server

[15:27:20] + Could not connect to Assignment Server

[15:27:20] - Couldn't send HTTP request to server

[15:27:20] + Could not connect to Assignment Server 2

[15:27:20] + Couldn't get work instructions.

[15:27:20] - Attempt #1 to get work failed, and no other work to do.

Waiting before retry.

[15:27:26] + Attempting to get work packet

[15:27:26] - Connecting to assignment server

[15:27:26] - Couldn't send HTTP request to server

[15:27:26] + Could not connect to Assignment Server

[15:27:26] - Couldn't send HTTP request to server

[15:27:26] + Could not connect to Assignment Server 2

[15:27:26] + Couldn't get work instructions.

[15:27:26] - Attempt #2 to get work failed, and no other work to do.

Waiting before retry.

[15:27:41] + Attempting to get work packet

[15:27:41] - Connecting to assignment server

[15:27:41] - Couldn't send HTTP request to server

[15:27:41] + Could not connect to Assignment Server

[15:27:41] - Couldn't send HTTP request to server

[15:27:41] + Could not connect to Assignment Server 2

[15:27:41] + Couldn't get work instructions.

[15:27:41] - Attempt #3 to get work failed, and no other work to do.

Waiting before retry.

[15:28:02] + Attempting to get work packet

[15:28:02] - Connecting to assignment server

[15:28:02] - Couldn't send HTTP request to server

[15:28:02] + Could not connect to Assignment Server

[15:28:02] - Couldn't send HTTP request to server

[15:28:02] + Could not connect to Assignment Server 2

[15:28:02] + Couldn't get work instructions.

[15:28:02] - Attempt #4 to get work failed, and no other work to do.

Waiting before retry.

[15:28:53] + Attempting to get work packet

[15:28:53] - Connecting to assignment server

[15:28:53] - Couldn't send HTTP request to server

[15:28:53] + Could not connect to Assignment Server

[15:28:53] - Couldn't send HTTP request to server

[15:28:53] + Could not connect to Assignment Server 2

[15:28:53] + Couldn't get work instructions.

[15:28:53] - Attempt #5 to get work failed, and no other work to do.

Waiting before retry.

[15:30:27] + Attempting to get work packet

[15:30:27] - Connecting to assignment server

[15:30:27] - Couldn't send HTTP request to server

[15:30:27] + Could not connect to Assignment Server

[15:30:27] - Couldn't send HTTP request to server

[15:30:27] + Could not connect to Assignment Server 2

[15:30:27] + Couldn't get work instructions.

[15:30:27] - Attempt #6 to get work failed, and no other work to do.

Waiting before retry.

Lien vers le commentaire
Partager sur d’autres sites

  • 2 semaines après...

Salut toTOW,

J'ai une question à propos de "additional Client parameters" :

1) est ce que je dois mettre les paramètres exactement comme suit :

"CAL_NO_FLUSH=1 BROOK_YIELD=2 CAL_PRE_FLUSH=1 FLUSH_INTERVAL=between 64-96"

sans les ", dans cette ordre et avec ces espaces.

2) est ce que c'est les réglages optimums (j'ai jamais rien mis jusqu'à maintenant) pour :

XP SP3, E8400 @4 Ghz et HD4770 @850 & 1000

Vista SP2, Q6600 et 8600GT

7, P4 @3.2 Ghz et HD3870

Sinon tu conseillerais quoi?

Lien vers le commentaire
Partager sur d’autres sites

1) Panneau de configuration > Système > Avancé > Variables d'environnement ... tu ajoute ensuite tes variables dans variables d'utilisateur (pas besoin de reboot, juste le client à relancer, mais c'est valable que pour ton utilisateur) ou dans variables système (si tu as plusieurs utilisateurs ou que le client tourne en sevice ... un reboot sera nécessaire pour prendre les variables en compte).

2) pour la 4770, je sais pas quel Flush_Interval il faut ... quelque chose entre la 3870 et la 4870 ... pour une 3870, FI de 64 (ou un peu plus suivant les fréquences et les WUs) et pour la 4870, FI de 128 (ou un peu plus). Plus le FI est élevé, plus le GPU est utilisés (et théoriquement, moins le CPU est utilisé) ... par contre, si le FI est trop élevé, la machine laggue ou peut faire des VPU Recover.

Lien vers le commentaire
Partager sur d’autres sites

  • 3 semaines après...

Amis plieurs, ca fait quelque temps que je n'avais pas posté ici, je me consacrais au lancement d'un nouveau projet qui intéressera tous les plieurs francophones ... plutot que de blablater, voici la description du projet :

FAH-Addict, première source d'information francophone sur le projet Folding@Home. Notre objectif est de vous fournir :

- les dernières nouvelles du projet

- des tutoriaux pour l'installation ou l'optimisation des clients et des OS

- des tests de matériel

Je vous invite donc à ajouter le site à vos bookmarks si vous souhaitez toujours être au courant des dernières nouveautés : FAH-Addict.

De nombreuses choses évoluent en ce moment sur le projet Folding ... une lecture de cette news est indispensable :francais:

Lien vers le commentaire
Partager sur d’autres sites

Le désir de repartir sur une base de code propre a conduit à la mise en place de nouveaux projets comme les serveurs v5 (actuellement en déploiement)

je constate en ce moment une forte baisse de ma moyenne depuis une petite semaine environ alors que ma production elle ne baisse pas(fahmon fahspy)

un serveur ne retiendrait'il pas des wus?

je vais m'inscrire sur ton fofo qui me plait bien;goob job

++

Lien vers le commentaire
Partager sur d’autres sites

  • 3 semaines après...

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

×
×
  • Créer...