Jump to content

Archived

This topic is now archived and is closed to further replies.

glukgluk

Réparer une clef USB

Recommended Posts

Bonjour

j'ai un problème avec une clef usb qu'un ami à débranché pendant un formatage...

Elle est bien reconnue sous windows mais est totalement inaccessible. Message "insérer un disque dans le lecteur". Elle m'affiche aussi une capacité erroné, 0Go au lieu de 8Go.

Je suis tombé sur ce poste sur Hardware.fr.

Le problème c'est que les commandes de l'astuce "sudo mkfs.vfat -I -F 16 /dev/sda" et "sudo dosfsck -t -a /dev/sda" ne pointe pas sur le bon périphérique. /dev/sda n'est pas la clef USB...

Apparemment avec la commande dmesg je devrais trouver le bon nœud qui correspond à ma clef usb. Voila ce que j'obtiens.

260.957108] usb 1-1.6: new high-speed USB device number 4 using ehci-pci

[ 261.929038] usb 1-1.6: New USB device found, idVendor=090c, idProduct=3000
[ 261.929041] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 261.929042] usb 1-1.6: Product: SM3255AA MEMORY BAR
[ 261.929043] usb 1-1.6: Manufacturer: Silicon Motion,Inc.
[ 261.929306] usb-storage 1-1.6:1.0: USB Mass Storage device detected
[ 261.929395] scsi9 : usb-storage 1-1.6:1.0
[ 262.928974] scsi 9:0:0:0: Direct-Access USB MEMORY BAR 1000 PQ: 0 ANSI: 0 CCS
[ 262.929139] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 262.930449] sd 9:0:0:0: [sdd] Attached SCSI removable disk
J’espère avoir copié la bonne partie...
En tous cas je ne vois rien qui ressemble au nom d'un nœud...
La clef usb n’apparaît pas non plus dans "la barre des taches" à gauche de l’écran. (désolé si ça porte un autre nom)
Je ne connais rien à linux...
Je suis avec un livecd de ubuntu que j'ai téléchargé spécialement car le CD que j'avais ne fonctionnais apparemment pas avec le bios UEFI de ma CM.

Share this post


Link to post
Share on other sites

[sdd] Attached SCSI removable disk

Teins cela ne veut-il pas dire /dev/sdd :siffle:

Dans un sens c'est normal si tu as 3 disques durs: /dev/sda /dev/sdb /dev/sdc :siffle:

Share this post


Link to post
Share on other sites

Le problème c'est que les commandes de l'astuce "sudo mkfs.vfat -I -F 16 /dev/sda" et "sudo dosfsck -t -a /dev/sda" ne pointe pas sur le bon périphérique. /dev/sda n'est pas la clef USB...

Tu as formaté ton disque dur ?

Car la première c'est la commande pour formater le premier disque dur en FAT16 :bol: et la seconde pour la vérifier.

Si tu as encore tes données c'est sûrement qu'il à détecté une erreur dans ta demande car le FAT16 est limité à 2Go normalement ce qui veut d'ailleurs dire que ta clé ne peut pas être formaté en FAT16 mais en FAT32 uniquement (limite recommandé à 32 Go, possible jusqu'à 2 To).

Accessoirement il n'est pas des plus courant de formater un disque dur ou clé sans système de partition, là avec /dev/sda tu accède au disque en entier et pas à l'une de ces partitions (/dev/sda1, /dev/sda2 ...). L'option "-l" sert à formater le disque entier en outrepassant cette recommandation. Les disquettes était formatés comme cela sans partition.

A mon avis le plus simple pour faire du partitionnement / formatage depuis Linux est simplement d'utiliser gparted, c'est graphique donc tu vois plus ce que tu fais. Bien sur formater supprime les données qu'il y a dessus.

Tu peut lire la doc sur les commandes que tu entre en utilisant la commande "man (nom de la commande)".

Par exemple : man mkfs.vfat

Les "sudo" c'est une commande pour être en administrateur.

Méfie toi des commandes trouvés sur Internet, c'est pas qu'elles soit forcément malveillantes mais elles peuvent être à adapter. Par exemple pour quelqu'un qui n'a que des disques durs IDE (/dev/hda) la clé USB risque effectivement d'être nommée "/dev/sda" et vu que ça à l'air tiré d'un vieux tutoriel c'est pas très étonnant.

Sinon je donne pas cher de la clé car elle n'a l'air aussi pas bien reconnue, généralement dmesg doit afficher la taille de la clé et les partitions et le passage en mode lecture écriture (au lieu de lecture seule).

Normalement il devrait ce passer ce genre de chose :

[ 5584.646134] usb 2-1: new high-speed USB device number 4 using ehci-pci

[ 5584.853351] usb-storage 2-1:1.0: USB Mass Storage device detected

[ 5584.853424] scsi6 : usb-storage 2-1:1.0

[ 5584.853648] usbcore: registered new interface driver usb-storage

[ 5585.856857] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2

[ 5585.858484] sd 6:0:0:0: [sdb] 15695872 512-byte logical blocks: (8.03 GB/7.48 GiB)

[ 5585.859241] sd 6:0:0:0: [sdb] Write Protect is off

[ 5585.859247] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00

[ 5585.859979] sd 6:0:0:0: [sdb] No Caching mode page found

[ 5585.859983] sd 6:0:0:0: [sdb] Assuming drive cache: write through

[ 5585.863099] sd 6:0:0:0: [sdb] No Caching mode page found

[ 5585.863102] sd 6:0:0:0: [sdb] Assuming drive cache: write through

[ 5585.996007] sdb: sdb1

[ 5585.998725] sd 6:0:0:0: [sdb] No Caching mode page found

[ 5585.998730] sd 6:0:0:0: [sdb] Assuming drive cache: write through

[ 5585.998733] sd 6:0:0:0: [sdb] Attached SCSI removable disk

Ici ma clé est /dev/sdb, fait 8Go et à une partition /dev/sdb1

Précise aussi la distribution Linux utilisée et quelle l'interface graphique (Gnome, KDE, XFCE) car lorsque tu parles e barre des taches à gauche je vois pas trop ce que c'est.

Share this post


Link to post
Share on other sites

Salut est merci pour les info

la version c'est 13.10 je crois et l’interface c'est celle par défaut (Gnome?)

Il ya un genre de finder vertical sur le bord gauche de l’écran. un genre d’accès rapide au fonction de base et au periph de stockage.

j'ai vue dans les commentaire sur hardware.fr que dev/sda était justement le HDD principal et il était conseillé de faire dmesg pour connaitre le bon nœud... (Merci à l'auteur du commentaire d’ailleurs :chinois: )

Le truc c'est que je savais pas le déchiffré . :oops:

J'ai donc essayé badblocks -s -v /dev/sdd

J'ai cette réponse :

ubuntu@ubuntu:~$ badblocks -s -v /dev/sdd

badblocks: Permission denied while trying to determine device size

C'est un problème de droit et je dois simplement ajouter "sudo" ou c'est plus grave que ça?

J'ai aussi essayé sudo mkfs.vfat -I -F16 /dev/sdd

J'ai cette réponse :

ubuntu@ubuntu:~$ sudo mkfs.vfat -I -F16 /dev/sdd

mkfs.vfat 3.0.16 (01 Mar 2013)
/dev/sdd: No medium found

Ça pue pour la cle là non?

Share this post


Link to post
Share on other sites

sudo permet d'avoir les droits de l'administrateur (le root) pendant X minutes.

La première commande "sudo XXX" te demandera le mot de passe de l'administrateur

Et ensuite, donc, pendant X minutes, tous les "sudo XXX" seront transparents.

Après le temps imparti, il te redemandera le mot de passe de l'administrateur

C'est pour éviter de saisir le mot de passe de l'administrateur à chaque commande "XXX" :windu:

Sinon ce n'est pas la peine de forcer: il n'y a pas de partitions sur ta clef USB (c'est le 1, 2, 3 ... après le sdb, sdd, ...)

Linux voit un gros bloc [il me semble que Linux te le dit "USB MEMORY BAR" ] :transpi:

Il faut passer par un outil graphique comme gparted et créer au moins une partition.

Ou alors sous Windows pour voir si elle est reconnue.

Share this post


Link to post
Share on other sites

ok

Sous windows elle apparaît dans le poste de travail mais grisé.

Pas moyen de la formater, j'ai le message "insérer un disque dans le lecteur"...

J'essaye avec gparted ce soir et je tien au jus.

Merci

Share this post


Link to post
Share on other sites

Le plus simple reste, sous ubuntu d'installer (si ce n'est pas deja fait) puis de lancer Gparted qui permettra de faire la manipulation dans une GUI... Ca evitera les erreurs de lettres :)

Share this post


Link to post
Share on other sites

Si, bien sur, on parle d'installer Gparted, pas Ubuntu lui-même, ça peut se faire depuis le liveUSB, faut juste un port de libre pour brancher les deux clés.

Concernant le formatage du disque entier sans partitionnement, OpenMediaVault me l'a fait lorsque j'ai créé mon RAID. C'est un peu étrange au départ, mais on s'y fait, et le seul truc est de pas l'oublier quand tu veux le monter dans un dossier (quand l'OS est en panne, ce qui m'est arrivé au début quand je cassais tout pour un oui ou un non :transpi: )

Share this post


Link to post
Share on other sites

Salut

la clé n'est pas reconnu par gparted.

Pas de /dev/sdd

ya /dev/sda, /dev/sdb, /dev/sdc mais pas /dev/sdd

Je tenterais bien le flash de la clé mais je suis pas sur que l'outil que j'ai trouvé soit le bon... Et je trouve pas de tuto pour le configurer. Y a des infos dans les réglages de l'outil qui sont pas bonne par défaut. Genre la capacité est plein d'autre truc que je sais même pas ce que sait... :fou:

Au cas ou ça intéresse quelqu'un le VID : 090C le PID : 3000 et l'outil que j'ai trouvé : SMI_SM3257ENAA_MPTool_V2.03.58_v8_K1129

La clé est une Verbatim 8Go.

Je pense qu'elle est bonne pour la poubelle.

Share this post


Link to post
Share on other sites

En general les clef USB foireuse, j'applique une methode un peu brute mais pour le moment y a pas mal de succes. Attention perte de donnée inside

cfdisk /dev/sdd pour verifier l'etat des partitions et le supprimer

ensuite dd if=/dev/zero of=/dev/sdd la tu va passé tout le bit de la clef a 0 elle sera completement vierge (tres pratique pour viré une MBR qui deconne) attention c'est long

Pour finir cfdisf /dev/sdd pour recréer ta partition

et bien un mkfs.???? pour re faire un filesysteme. ou ???? correspond au type de fs que u veux mettre (ext3, ext4, ntfs, vfat....)

Bien sur le type de partition doit correspondre au FS derriere.

Share this post


Link to post
Share on other sites

Bonjour lu6fer

Merci pour cette méthode.

Je vais tester.

juste, je n'ai pas bien compris la fin

et bien un mkfs.???? pour re faire un filesysteme. ou ???? correspond au type de fs que u veux mettre (ext3, ext4, ntfs, vfat....)

Bien sur le type de partition doit correspondre au FS derriere.

Apres cfdisf /dev/sdd, je dois faire un mkfs? comme ça par exemple : mkfs.vfat -I -F32 /dev/sdd pour du fat32?

Share this post


Link to post
Share on other sites

je viens d'essayer

avec cfdisk /dev/sdd j'ai une erreur fatal

dd if=/dev/zero of=/dev/sdd : No medium found

:craint:

Pas de miracle pour cette clé a mon avis

Share this post


Link to post
Share on other sites

Bonjour lu6fer

Merci pour cette méthode.

Je vais tester.

juste, je n'ai pas bien compris la fin

et bien un mkfs.???? pour re faire un filesysteme. ou ???? correspond au type de fs que u veux mettre (ext3, ext4, ntfs, vfat....)

Bien sur le type de partition doit correspondre au FS derriere.

Apres cfdisf /dev/sdd, je dois faire un mkfs? comme ça par exemple : mkfs.vfat -I -F32 /dev/sdd pour du fat32?

oui via cfdisk tu créer ta partition tu n'oublie pas de changer le type en 0x0C je crois

puis en suite tu execute ton mkfs.vfat sur ta nouvelle partition soit /dev/sdd1 normalement

je viens d'essayer

avec cfdisk /dev/sdd j'ai une erreur fatal

dd if=/dev/zero of=/dev/sdd : No medium found

:craint:

Pas de miracle pour cette clé a mon avis

Tu vois la clef via un dmesg ?

Share this post


Link to post
Share on other sites

dmesg me dit ça (désolé pour la longueur mais je branche la clé après le démarrage donc elle doit être à la fin ) :

[ 3.660529] usb usb4: Product: xHCI Host Controller
[ 3.660530] usb usb4: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[ 3.660531] usb usb4: SerialNumber: 0000:03:00.0
[ 3.660565] xHCI xhci_add_endpoint called for root hub
[ 3.660566] xHCI xhci_check_bandwidth called for root hub
[ 3.660576] hub 4-0:1.0: USB hub found
[ 3.660582] hub 4-0:1.0: 2 ports detected
[ 3.664809] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.664812] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[ 3.664980] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 3.664985] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[ 3.664988] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
[ 3.664992] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
[ 3.664995] xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X
[ 3.664999] xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X
[ 3.665002] xhci_hcd 0000:04:00.0: irq 55 for MSI/MSI-X
[ 3.665006] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
[ 3.665110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.665112] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.665113] usb usb5: Product: xHCI Host Controller
[ 3.665114] usb usb5: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[ 3.665115] usb usb5: SerialNumber: 0000:04:00.0
[ 3.665150] xHCI xhci_add_endpoint called for root hub
[ 3.665151] xHCI xhci_check_bandwidth called for root hub
[ 3.665163] hub 5-0:1.0: USB hub found
[ 3.665168] hub 5-0:1.0: 2 ports detected
[ 3.665207] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.665209] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[ 3.668395] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.668396] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.668397] usb usb6: Product: xHCI Host Controller
[ 3.668398] usb usb6: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
[ 3.668399] usb usb6: SerialNumber: 0000:04:00.0
[ 3.668433] xHCI xhci_add_endpoint called for root hub
[ 3.668434] xHCI xhci_check_bandwidth called for root hub
[ 3.668444] hub 6-0:1.0: USB hub found
[ 3.668450] hub 6-0:1.0: 2 ports detected
[ 3.672795] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.675236] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.675240] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.675295] mousedev: PS/2 mouse device common for all mice
[ 3.675370] rtc_cmos 00:05: RTC can wake from S4
[ 3.675477] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.675503] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.675535] device-mapper: uevent: version 1.0.3
[ 3.675570] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 3.675651] cpuidle: using governor ladder
[ 3.675765] cpuidle: using governor menu
[ 3.675771] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.675772] EFI Variables Facility v0.08 2004-May-17
[ 3.729217] hpet1: lost 2 rtc interrupts
[ 3.730390] TCP: cubic registered
[ 3.730443] NET: Registered protocol family 10
[ 3.730554] NET: Registered protocol family 17
[ 3.730559] Key type dns_resolver registered
[ 3.730724] PM: Hibernation image not present or could not be loaded.
[ 3.730726] Loading module verification certificates
[ 3.731355] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
[ 3.731361] registered taskstats version 1
[ 3.732659] Key type trusted registered
[ 3.733756] Key type encrypted registered
[ 3.734825] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.735178] Magic number: 1:692:595
[ 3.735269] rtc_cmos 00:05: setting system clock to 2013-10-23 18:35:39 UTC (1382553339)
[ 3.736070] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.736071] EDD information not available.
[ 3.736719] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 3.736725] Write protecting the kernel read-only data: 12288k
[ 3.738350] Freeing unused kernel memory: 1040K (ffff88000e6fc000 - ffff88000e800000)
[ 3.739501] Freeing unused kernel memory: 836K (ffff88000eb2f000 - ffff88000ec00000)
[ 3.747822] systemd-udevd[145]: starting version 204
[ 3.754911] wmi: Mapper loaded
[ 3.754954] video: module verification failed: signature and/or required key missing - tainting kernel
[ 3.760359] ahci 0000:00:1f.2: version 3.0
[ 3.760480] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 3.761453] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.761464] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.761666] r8169 0000:05:00.0: irq 58 for MSI/MSI-X
[ 3.761806] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000032000, f4:6d:04:d4:96:a8, XID 0c200000 IRQ 58
[ 3.761809] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.762846] [drm] Initialized drm 1.1.0 20060810
[ 3.772745] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[ 3.772750] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 3.772754] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.777510] checking generic (f1000000 1e0000) vs hw (e8000000 8000000)
[ 3.777512] checking generic (f1000000 1e0000) vs hw (f0000000 2000000)
[ 3.777513] fb: conflicting fb hw usage nouveaufb vs EFI VGA - removing generic driver
[ 3.777522] Console: switching to colour dummy device 80x25
[ 3.777790] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c8300a1
[ 3.777792] nouveau [ DEVICE][0000:01:00.0] Chipset: GF110 (NVC8)
[ 3.777793] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 3.778816] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.788997] scsi0 : ahci
[ 3.789110] scsi1 : ahci
[ 3.789230] scsi2 : ahci
[ 3.789328] scsi3 : ahci
[ 3.789446] scsi4 : ahci
[ 3.789537] scsi5 : ahci
[ 3.789597] ata1: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506100 irq 57
[ 3.789598] ata2: DUMMY
[ 3.789599] ata3: DUMMY
[ 3.789603] ata4: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506280 irq 57
[ 3.789606] ata5: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506300 irq 57
[ 3.789607] ata6: DUMMY
[ 3.789716] ahci 0000:08:00.0: irq 59 for MSI/MSI-X
[ 3.789865] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.789867] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 3.790298] scsi6 : ahci
[ 3.790466] scsi7 : ahci
[ 3.790520] ata7: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 59
[ 3.790525] ata8: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 59
[ 3.832733] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.873730] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 3.873731] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 3.873794] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 3.873796] nouveau [ VBIOS][0000:01:00.0] version 70.10.1b.00.00
[ 3.895788] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 3.895789] nouveau [ PFB][0000:01:00.0] RAM size: 1280 MiB
[ 3.895790] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 3.918375] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 3.918378] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 3.918379] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 3.921163] [TTM] Zone kernel: Available graphics memory: 4071780 kiB
[ 3.921164] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.921164] [TTM] Initializing pool allocator
[ 3.921167] [TTM] Initializing DMA pool allocator
[ 3.921172] nouveau [ DRM] VRAM: 1280 MiB
[ 3.921173] nouveau [ DRM] GART: 1048576 MiB
[ 3.921175] nouveau [ DRM] TMDS table version 2.0
[ 3.921176] nouveau [ DRM] DCB version 4.0
[ 3.921177] nouveau [ DRM] DCB outp 00: 02000300 00000000
[ 3.921179] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 3.921180] nouveau [ DRM] DCB outp 02: 04011380 00000000
[ 3.921181] nouveau [ DRM] DCB outp 03: 08011382 00020030
[ 3.921181] nouveau [ DRM] DCB outp 04: 02022362 00020010
[ 3.921182] nouveau [ DRM] DCB outp 05: 048333b6 0f220010
[ 3.921183] nouveau [ DRM] DCB outp 06: 04033372 00020010
[ 3.921184] nouveau [ DRM] DCB conn 00: 00001030
[ 3.921185] nouveau [ DRM] DCB conn 01: 00010130
[ 3.921186] nouveau [ DRM] DCB conn 02: 00002261
[ 3.921187] nouveau [ DRM] DCB conn 03: 00420346
[ 3.921814] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.921814] [drm] No driver support for vblank timestamp query.
[ 3.921999] nouveau [ DRM] 0 available performance level(s)
[ 3.922001] nouveau [ DRM] c: core 50MHz shader 101MHz memory 135MHz voltage 913mV fanspeed 18%
[ 3.926799] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 3.984602] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.108611] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.108627] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.108696] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.108700] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.108764] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.109016] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.109020] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802130cc960), AE_NOT_FOUND (20130517/psparse-536)
[ 4.109176] ata1.00: ATA-9: M4-CT128M4SSD2, 070H, max UDMA/100
[ 4.109178] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.109231] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.109235] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8802130ccb40), AE_NOT_FOUND (20130517/psparse-536)
[ 4.109537] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.109541] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff8802130ccac8), AE_NOT_FOUND (20130517/psparse-536)
[ 4.109546] ata4.00: ATAPI: HL-DT-STDVD-ROM DH16NS10, 0L04, max UDMA/100
[ 4.109581] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.109585] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff8802130cc960), AE_NOT_FOUND (20130517/psparse-536)
[ 4.109592] ata5.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[ 4.109594] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.109728] ata1.00: configured for UDMA/100
[ 4.109896] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 070H PQ: 0 ANSI: 5
[ 4.109996] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 4.110009] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.110064] sd 0:0:0:0: [sda] Write Protect is off
[ 4.110069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.110089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.110320] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.110324] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8802130ccb40), AE_NOT_FOUND (20130517/psparse-536)
[ 4.110582] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[ 4.110587] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff8802130ccac8), AE_NOT_FOUND (20130517/psparse-536)
[ 4.110595] ata4.00: configured for UDMA/100
[ 4.110599] ata5.00: configured for UDMA/133
[ 4.110643] sda: sda1 sda2
[ 4.110812] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.113182] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-ROM DH16NS10 0L04 PQ: 0 ANSI: 5
[ 4.114688] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 4.114690] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.114790] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.114883] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.115075] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 MS1O PQ: 0 ANSI: 5
[ 4.115196] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.115208] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.115210] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 4.115381] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.115387] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.115458] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.116901] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.116903] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.117162] hub 1-1:1.0: USB hub found
[ 4.117270] hub 1-1:1.0: 6 ports detected
[ 4.136564] sdb: sdb1
[ 4.137028] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 4.181536] nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff88020d23a000
[ 4.181631] fbcon: nouveaufb (fb0) is primary device
[ 4.228450] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.235536] Console: switching to colour frame buffer device 240x67
[ 4.239609] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 4.239610] nouveau 0000:01:00.0: registered panic notifier
[ 4.239613] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 4.332485] firewire_core 0000:07:03.0: created device fw0: GUID 001e8c000042a33f, S400
[ 4.360770] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.360772] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.361038] hub 2-1:1.0: USB hub found
[ 4.361109] hub 2-1:1.0: 8 ports detected
[ 4.472314] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[ 4.564260] tsc: Refined TSC clocksource calibration: 3400.024 MHz
[ 4.581898] usb 5-1: New USB device found, idVendor=045e, idProduct=0719
[ 4.581900] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.581902] usb 5-1: Product: Xbox 360 Wireless Receiver for Windows
[ 4.581903] usb 5-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft
[ 4.581904] usb 5-1: SerialNumber: FDE00240
[ 4.696202] usb 5-2: new full-speed USB device number 3 using xhci_hcd
[ 5.299501] usb 5-2: New USB device found, idVendor=041e, idProduct=3222
[ 5.299506] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.299509] usb 5-2: Product: SB Tactic(3D) Wrath Wireless
[ 5.299512] usb 5-2: Manufacturer: Creative Technology Ltd.
[ 5.299675] usb 5-2: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.309799] hidraw: raw HID events driver © Jiri Kosina
[ 5.317471] usbcore: registered new interface driver usbhid
[ 5.317472] usbhid: USB HID core driver
[ 5.329538] input: Creative Technology Ltd. SB Tactic(3D) Wrath Wireless as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-2/5-2:1.3/input/input2
[ 5.329638] hid-generic 0003:041E:3222.0001: input,hiddev0,hidraw0: USB HID v1.01 Keyboard [Creative Technology Ltd. SB Tactic(3D) Wrath Wireless] on usb-0000:04:00.0-2/input3
[ 5.379922] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[ 5.475366] usb 1-1.5: New USB device found, idVendor=13fe, idProduct=4100
[ 5.475368] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.475370] usb 1-1.5: Product: USB DISK 2.0
[ 5.475371] usb 1-1.5: Manufacturer:
[ 5.475371] usb 1-1.5: SerialNumber: 070B34FD20A9EC06
[ 5.476306] usb-storage 1-1.5:1.0: USB Mass Storage device detected
[ 5.476428] scsi8 : usb-storage 1-1.5:1.0
[ 5.476470] usbcore: registered new interface driver usb-storage
[ 5.547837] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 5.563818] Switched to clocksource tsc
[ 5.640030] usb 2-1.1: New USB device found, idVendor=0409, idProduct=005a
[ 5.640035] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.640307] hub 2-1.1:1.0: USB hub found
[ 5.640374] hub 2-1.1:1.0: 3 ports detected
[ 5.711742] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[ 5.807058] usb 2-1.5: New USB device found, idVendor=22d4, idProduct=2100
[ 5.807063] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.807066] usb 2-1.5: Product: Spawn_108a
[ 5.807068] usb 2-1.5: Manufacturer: Laview Co.
[ 5.808694] input: Laview Co. Spawn_108a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3
[ 5.808931] hid-generic 0003:22D4:2100.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Laview Co. Spawn_108a] on usb-0000:00:1d.0-1.5/input0
[ 5.810065] input: Laview Co. Spawn_108a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input4
[ 5.810224] hid-generic 0003:22D4:2100.0003: input,hidraw2: USB HID v1.11 Keyboard [Laview Co. Spawn_108a] on usb-0000:00:1d.0-1.5/input1
[ 5.879639] usb 2-1.7: new full-speed USB device number 5 using ehci-pci
[ 5.972466] usb 2-1.7: New USB device found, idVendor=0b05, idProduct=179c
[ 5.972471] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.059532] usb 2-1.1.3: new low-speed USB device number 6 using ehci-pci
[ 6.186087] usb 2-1.1.3: New USB device found, idVendor=1038, idProduct=0510
[ 6.186092] usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.186095] usb 2-1.1.3: Product: Merc Stealth
[ 6.186097] usb 2-1.1.3: Manufacturer: Ideazon
[ 6.196603] input: Ideazon Merc Stealth as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/input/input5
[ 6.196766] hid-generic 0003:1038:0510.0004: input,hidraw3: USB HID v1.11 Keyboard [ideazon Merc Stealth] on usb-0000:00:1d.0-1.1.3/input0
[ 6.216385] input: Ideazon Merc Stealth as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.1/input/input6
[ 6.216647] hid-generic 0003:1038:0510.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [ideazon Merc Stealth] on usb-0000:00:1d.0-1.1.3/input1
[ 6.476282] scsi 8:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 6.476449] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 6.477386] sd 8:0:0:0: [sdc] 62554112 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 6.478632] sd 8:0:0:0: [sdc] Write Protect is off
[ 6.478634] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 6.479993] sd 8:0:0:0: [sdc] No Caching mode page found
[ 6.479995] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 6.484908] sd 8:0:0:0: [sdc] No Caching mode page found
[ 6.484913] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 6.485794] sdc: sdc1
[ 6.490413] sd 8:0:0:0: [sdc] No Caching mode page found
[ 6.490415] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 6.490416] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 7.464607] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 12.481456] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.541428] systemd-udevd[1202]: starting version 204
[ 12.732399] Bluetooth: Core ver 2.16
[ 12.732409] NET: Registered protocol family 31
[ 12.732410] Bluetooth: HCI device and connection manager initialized
[ 12.732415] Bluetooth: HCI socket layer initialized
[ 12.732417] Bluetooth: L2CAP socket layer initialized
[ 12.732419] Bluetooth: SCO socket layer initialized
[ 12.766217] init: avahi-cups-reload main process (1264) terminated with status 1
[ 12.769006] Bluetooth: RFCOMM TTY layer initialized
[ 12.769014] Bluetooth: RFCOMM socket layer initialized
[ 12.769015] Bluetooth: RFCOMM ver 1.11
[ 12.781679] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.781681] Bluetooth: BNEP filters: protocol multicast
[ 12.781688] Bluetooth: BNEP socket layer initialized
[ 12.793299] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[ 12.828144] lp: driver loaded but no devices found
[ 12.849241] ppdev: user-space parallel port driver
[ 12.896971] mei_me 0000:00:16.0: setting latency timer to 64
[ 12.897004] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[ 12.903336] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 12.903341] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.903344] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 12.903347] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
[ 12.903350] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.903351] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 12.903354] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
[ 12.903356] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.903357] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 12.903360] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
[ 12.903362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.903363] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.932506] device-mapper: multipath: version 1.5.1 loaded
[ 12.942020] usbcore: registered new interface driver btusb
[ 13.023677] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 13.023775] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[ 13.069102] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.0/input/input7
[ 13.069205] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.2/input/input8
[ 13.069293] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.4/input/input9
[ 13.069460] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:1c.4/0000:04:00.0/usb5/5-1/5-1:1.6/input/input10
[ 13.069663] usbcore: registered new interface driver xpad
[ 13.097708] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[ 13.105693] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[ 13.105977] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[ 13.106273] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28
[ 13.106568] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28
[ 13.107630] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28
[ 13.107889] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28
[ 13.108162] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.146660] asus_wmi: ASUS WMI generic driver loaded
[ 13.151327] asus_wmi: Initialization: 0x0
[ 13.151350] asus_wmi: BIOS WMI version: 0.9
[ 13.151390] asus_wmi: SFUN value: 0x0
[ 13.151682] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
[ 13.152323] asus_wmi: Disabling ACPI video driver
[ 13.206925] usbcore: registered new interface driver snd-usb-audio
[ 13.233914] kvm: disabled by bios
[ 13.301617] init: failsafe main process (1441) killed by TERM signal
[ 13.744214] init: alsa-restore main process (1821) terminated with status 99
[ 14.034763] hda-intel 0000:00:1b.0: Codec #3 probe error; disabling it...
[ 14.056077] SKU: Nid=0x1d sku_cfg=0x4005e601
[ 14.056079] SKU: port_connectivity=0x1
[ 14.056080] SKU: enable_pcbeep=0x0
[ 14.056081] SKU: check_sum=0x00000005
[ 14.056081] SKU: customization=0x000000e6
[ 14.056082] SKU: external_amp=0x0
[ 14.056083] SKU: platform_type=0x0
[ 14.056083] SKU: swap=0x0
[ 14.056084] SKU: override=0x1
[ 14.056533] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 14.056534] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.056535] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.056536] mono: mono_out=0x0
[ 14.056537] dig-out=0x11/0x1e
[ 14.056537] inputs:
[ 14.056538] Front Mic=0x19
[ 14.056539] Rear Mic=0x18
[ 14.056540] Line=0x1a
[ 14.056541] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 14.056541] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
[ 14.067833] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.067876] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 14.067907] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 14.067938] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 14.067969] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 14.067999] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 14.068026] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 14.068055] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 14.068190] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 14.068227] hda_intel: Disabling MSI
[ 14.068232] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 14.068252] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 14.071510] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 14.078504] r8169 0000:05:00.0 eth0: link down
[ 14.078534] r8169 0000:05:00.0 eth0: link down
[ 14.078536] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.078725] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.878363] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20
[ 14.878426] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
[ 14.878464] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
[ 14.878499] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
[ 16.459497] r8169 0000:05:00.0 eth0: link up
[ 16.459503] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.285280] systemd-hostnamed[3713]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 59.608474] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 60.580281] usb 1-1.6: New USB device found, idVendor=090c, idProduct=3000
[ 60.580285] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 60.580287] usb 1-1.6: Product: SM3255AA MEMORY BAR
[ 60.580288] usb 1-1.6: Manufacturer: Silicon Motion,Inc.
[ 60.580565] usb-storage 1-1.6:1.0: USB Mass Storage device detected
[ 60.580619] scsi9 : usb-storage 1-1.6:1.0
[ 61.580350] scsi 9:0:0:0: Direct-Access USB MEMORY BAR 1000 PQ: 0 ANSI: 0 CCS
[ 61.580528] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 61.582338] sd 9:0:0:0: [sdd] Attached SCSI removable disk

Share this post


Link to post
Share on other sites

si tu fais

ls -l /dev/sdd

Il te repond quelque chose ?

De plus tu fait bien toutes les operations en root ?

Share this post


Link to post
Share on other sites

oui avec sudo avant.

je dois reboot sur le live usb, je reviens


ubuntu@ubuntu:~$ sudo ls -l /dev/sdd
brw-rw---- 1 root disk 8, 48 Oct 25 13:04 /dev/sdd
c'est grave docteur? :ane:

Share this post


Link to post
Share on other sites

Il est bien en mode block, tu devrais pouvoir afficher un truc (toutes les commandes à faire en root, t'es aussi bien de faire sudo su, histoire d'avoir moins de choses à taper :D )

Share this post


Link to post
Share on other sites

×
×
  • Create New...