mtb_s Posté(e) le 27 août 2004 Partager Posté(e) le 27 août 2004 Salut a tous, Voila jviens d'installer ma ptite gentoo mais g un probleme avec fglrx, qd je fais un startx ill se lance biens mais sans l'accélération 3d, je sais question récurente lol g une ATI lol Voici mon xorg.0.log : désolé c un peut long Release Date: 18 December 2003 X Protocol Version 11, Revision 0, Release 6.7 Build Operating System: Linux 2.4.26-gentoo-r6 i686 [ELF] Current Operating System: Linux localhost 2.6.7 #1 SMP Fri Aug 27 20:40:48 CEST 2004 i686 Build Date: 26 August 2004 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 27 22:37:35 2004 (==) Using config file: "/root/xorg.conf" (==) ServerLayout "Server Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "ATI Graphics Adapter" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "fr" (**) XKB: layout: "fr" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 Using vt 7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8002682c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2570 card 1043,80f2 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24d1 card 1043,80a6 rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4e48 card 1681,0002 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4e68 card 1681,0003 rev 00 class 03,80,00 hdr 00 (II) PCI: 02:05:0: chip 10b7,1700 card 1043,80eb rev 12 class 02,00,00 hdr 00 (II) PCI: 02:0d:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80 (II) PCI: 02:0d:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX (II) Bus 1 prefetchable memory range: [0] -1 0 0xcff00000 - 0xefefffff (0x20000000) MX (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800] rev 0, Mem @ 0xe0000000/27, 0xfe9f0000/16, I/O @ 0xc000/8, BIOS @ 0xfe9c0000/17 (--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800] (Secondary) rev 0, Mem @ 0xd8000000/27, 0xfe9e0000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX [6] -1 0 0x00000000 - 0x000000ff (0x100) IX (II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff (II) Active PCI resource ranges: [0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX [1] -1 0 0x20000000 - 0x200003ff (0x400) MX [2] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX [3] -1 0 0xf0000000 - 0xefffffff (0x0) MXO [4] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX(B) [5] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B) [6] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX(B) [7] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX(B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B) [9] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX [10] -1 0 0x0000df40 - 0x0000df5f (0x20) IX [11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX [12] -1 0 0x00000400 - 0x0000041f (0x20) IX [13] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX [14] -1 0 0x0000efa8 - 0x0000efab (0x4) IX [15] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX [16] -1 0 0x0000efac - 0x0000efaf (0x4) IX [17] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX [18] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX [19] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX [20] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX [21] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX [22] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX [23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX [1] -1 0 0x20000000 - 0x200003ff (0x400) MX [2] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX [3] -1 0 0xf0000000 - 0xefffffff (0x0) MXO [4] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX(B) [5] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B) [6] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX(B) [7] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX(B) [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B) [9] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX [10] -1 0 0x0000df40 - 0x0000df5f (0x20) IX [11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX [12] -1 0 0x00000400 - 0x0000041f (0x20) IX [13] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX [14] -1 0 0x0000efa8 - 0x0000efab (0x4) IX [15] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX [16] -1 0 0x0000efac - 0x0000efaf (0x4) IX [17] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX [18] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX [19] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX [20] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX [21] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX [22] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX [23] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B) [1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MXE(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX [6] -1 0 0x00000000 - 0x000000ff (0x100) IX (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B) [1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MXE(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX [5] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX [6] -1 0 0x20000000 - 0x200003ff (0x400) MX [7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX [8] -1 0 0xf0000000 - 0xefffffff (0x0) MXO [9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX(B) [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B) [11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX(B) [12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX(B) [13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B) [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX [15] -1 0 0x00000000 - 0x000000ff (0x100) IX [16] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX [17] -1 0 0x0000df40 - 0x0000df5f (0x20) IX [18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX [19] -1 0 0x00000400 - 0x0000041f (0x20) IX [20] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX [21] -1 0 0x0000efa8 - 0x0000efab (0x4) IX [22] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX [23] -1 0 0x0000efac - 0x0000efaf (0x4) IX [24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX [25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX [26] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX [27] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX [28] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX [29] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX [30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.7.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0.1, module version = 3.9.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000), ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000), ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9), ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE), ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500), ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500), ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600), ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500), ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1), ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown), ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800), ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10) (II) Primary Device is: PCI 01:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI R350 NH (R9800) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B) [1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MXE(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX [5] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX [6] -1 0 0x20000000 - 0x200003ff (0x400) MX [7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX [8] -1 0 0xf0000000 - 0xefffffff (0x0) MXO [9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX(B) [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B) [11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX(B) [12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX(B) [13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B) [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX [15] -1 0 0x00000000 - 0x000000ff (0x100) IX [16] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX [17] -1 0 0x0000df40 - 0x0000df5f (0x20) IX [18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX [19] -1 0 0x00000400 - 0x0000041f (0x20) IX [20] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX [21] -1 0 0x0000efa8 - 0x0000efab (0x4) IX [22] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX [23] -1 0 0x0000efac - 0x0000efaf (0x4) IX [24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX [25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX [26] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX [27] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX [28] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX [29] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX [30] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(B) (II) fglrx(0): pEnt->device->identifier=0x82096a0 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B) [1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MXE(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX [5] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX [6] -1 0 0x20000000 - 0x200003ff (0x400) MX [7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX [8] -1 0 0xf0000000 - 0xefffffff (0x0) MXO [9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX(B) [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B) [11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX(B) [12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX(B) [13] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX [18] -1 0 0x00000000 - 0x000000ff (0x100) IX [19] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX [20] -1 0 0x0000df40 - 0x0000df5f (0x20) IX [21] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX [22] -1 0 0x00000400 - 0x0000041f (0x20) IX [23] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX [24] -1 0 0x0000efa8 - 0x0000efab (0x4) IX [25] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX [26] -1 0 0x0000efac - 0x0000efaf (0x4) IX [27] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX [28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX [29] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX [30] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX [31] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX [32] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX [33] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(B) [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS [35] 0 0 0x000003c0 - 0x000003df (0x20) IS (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.7.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "DesktopSetup" "0x00000000" (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO" (**) fglrx(0): Option "HSync2" "unspecified" (**) fglrx(0): Option "VRefresh2" "unspecified" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "IgnoreEDID" "off" (**) fglrx(0): Option "UseInternalAGPGART" "yes" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "0" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "FSAAScale" "1" (**) fglrx(0): Option "FSAAEnable" "no" (**) fglrx(0): Option "FSAADisableGamma" "no" (**) fglrx(0): Option "FSAACustomizeMSPos" "no" (**) fglrx(0): Option "FSAAMSPosX0" "0.000000" (**) fglrx(0): Option "FSAAMSPosY0" "0.000000" (**) fglrx(0): Option "FSAAMSPosX1" "0.000000" (**) fglrx(0): Option "FSAAMSPosY1" "0.000000" (**) fglrx(0): Option "FSAAMSPosX2" "0.000000" (**) fglrx(0): Option "FSAAMSPosY2" "0.000000" (**) fglrx(0): Option "FSAAMSPosX3" "0.000000" (**) fglrx(0): Option "FSAAMSPosY3" "0.000000" (**) fglrx(0): Option "FSAAMSPosX4" "0.000000" (**) fglrx(0): Option "FSAAMSPosY4" "0.000000" (**) fglrx(0): Option "FSAAMSPosX5" "0.000000" (**) fglrx(0): Option "FSAAMSPosY5" "0.000000" (**) fglrx(0): Option "NoTV" "yes" (**) fglrx(0): Option "TVStandard" "NTSC-M" (**) fglrx(0): Option "TVHSizeAdj" "0" (**) fglrx(0): Option "TVVSizeAdj" "0" (**) fglrx(0): Option "TVHPosAdj" "0" (**) fglrx(0): Option "TVVPosAdj" "0" (**) fglrx(0): Option "TVHStartAdj" "0" (**) fglrx(0): Option "TVColorAdj" "0" (**) fglrx(0): Option "PseudoColorVisuals" "off" (**) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): initializing int10 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (**) fglrx(0): Option "mtrr" "off" (--) fglrx(0): Chipset: "ATI R350 NH (R9800)" (Chipset = 0x4e48) (--) fglrx(0): (PciSubVendor = 0x1681, PciSubDevice = 0x0002) (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 (--) fglrx(0): MMIO registers at 0xfe9f0000 (--) fglrx(0): ROM-BIOS at 0xfe9c0000 (--) fglrx(0): ChipExtRevID = 0x00 (--) fglrx(0): ChipIntRevID = 0x01 (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (**) fglrx(0): MonitorLayout Option: Monitor1--Type AUTO, Monitor2--Type AUTO (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1 (II) fglrx(0): Primary head: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) fglrx(0): Secondary head: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) fglrx(0): EDID data from the display on Secondary head --------------------------- (II) fglrx(0): Manufacturer: NEC Model: 65ef Serial#: 16843009 (II) fglrx(0): Year: 2003 Week: 16 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) fglrx(0): Sync: Separate Composite SyncOnGreen (II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610 (II) fglrx(0): blueX: 0.140 blueY: 0.070 whiteX: 0.310 whiteY: 0.330 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): 1152x870@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz (II) fglrx(0): Monitor name: NEC LCD1701 (II) fglrx(0): Serial No: 34162114GB (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (**) fglrx(0): PseudoColor visuals disabled (**) fglrx(0): Overlay disabled (**) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=41675; xclk=34425 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total 6 valid mode(s) found. (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz (II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz (II) fglrx(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (--) fglrx(0): Display dimensions: (340, 270) mm (--) fglrx(0): DPI set to (95, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.7.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (**) fglrx(0): FSAA Gamma enabled (**) fglrx(0): FSAA Multisample Position is fix (**) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0.1, module version = 3.9.0 ABI class: XFree86 Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x00000000 (**) fglrx(0): cpuFlags: 0x8000001d (**) fglrx(0): cpuSpeedMHz: 0x00000ca4 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): using built in AGPGART module: yes (**) fglrx(0): UseFastTLS=0 (**) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024] (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX [1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B) [3] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MXE(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX [7] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX [8] -1 0 0x20000000 - 0x200003ff (0x400) MX [9] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX [10] -1 0 0xf0000000 - 0xefffffff (0x0) MXO [11] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX(B) [12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX(B) [13] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX(B) [14] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX(B) [15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX(B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS [19] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX [21] -1 0 0x00000000 - 0x000000ff (0x100) IX [22] -1 0 0x0000dfe0 - 0x0000dfe7 (0x8) IX [23] -1 0 0x0000df40 - 0x0000df5f (0x20) IX [24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX [25] -1 0 0x00000400 - 0x0000041f (0x20) IX [26] -1 0 0x0000ef60 - 0x0000ef6f (0x10) IX [27] -1 0 0x0000efa8 - 0x0000efab (0x4) IX [28] -1 0 0x0000efa0 - 0x0000efa7 (0x8) IX [29] -1 0 0x0000efac - 0x0000efaf (0x4) IX [30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX [31] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX [32] -1 0 0x0000ef80 - 0x0000ef9f (0x20) IX [33] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX [34] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX [35] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX [36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX(B) [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS [38] 0 0 0x000003c0 - 0x000003df (0x20) IS (WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default (II) fglrx(0): UMM area: 0xe0700000 (size=0x07900000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (WW) fglrx(0): could not detect XFree86 version (query_status=-3) (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: open result is -1, (Unknown error 999) drmOpenDevice: Open failed [drm] failed to load kernel module "fglrx" (II) fglrx(0): [drm] drmOpen failed (EE) fglrx(0): DRIScreenInit failed! (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* * (II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x08000000 (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 1024) (II) fglrx(0): Largest offscreen area available: 1280 x 7163 (**) Option "dpms" (**) fglrx(0): DPMS enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): Direct rendering disabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "ImPS/2" (**) Mouse1: Device: "/dev/mouse" (**) Mouse1: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/mouse" (==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse1: ZAxisMapping: buttons 4 and 5 (**) Mouse1: Buttons: 5 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: ps2EnableDataReporting: succeeded Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! qd je fais un modprobe fglrx y me sort une erreur voila quelqu'un peux me filer un coup de main ? thx Lien vers le commentaire Partager sur d’autres sites More sharing options...
lorinc Posté(e) le 27 août 2004 Partager Posté(e) le 27 août 2004 http://www.pcinpact.com/forum/index.php?showtopic=20885 il faut que tu compile le module du DRM, la procedure a été dite et redite maintes fois ici et si possible, vire les trois quart de ton log, il ne copier que là où y a une erreur ((II) fglrx(0): [drm] drmOpen failed (EE) fglrx(0): DRIScreenInit failed! ) parce que c lourd a la lecture Lien vers le commentaire Partager sur d’autres sites More sharing options...
tuXXX Posté(e) le 27 août 2004 Partager Posté(e) le 27 août 2004 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a(II) Module glx: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 ...voilà, il utilise pas les bonnes librairies... tu as bien utilisé "emerge ati-drivers" et exécuté "opengl-update ati" comme ils le disent ? Lien vers le commentaire Partager sur d’autres sites More sharing options...
lorinc Posté(e) le 27 août 2004 Partager Posté(e) le 27 août 2004 tiens, je l'avais pas vu, celle-là... n'empeche que le support du DRM est pas compilé, alors ça ne risque pas de marcher même ebn linkant vers la bonne libGL.so Lien vers le commentaire Partager sur d’autres sites More sharing options...
BaubLeNabot Posté(e) le 27 août 2004 Partager Posté(e) le 27 août 2004 Je donne ce que je fait et qui marche sur chaque install : -compilation avec agpart en module et sans drm -emerge ati-drivers -fglrxconfig ( "n" pour use external agp part) -j'edit le Xf86config pour ajouter la molette de la souris -je renomme Xf86 en xorg.conf -opengl-update ati -startx Et Direct rendering : Yes :) Lien vers le commentaire Partager sur d’autres sites More sharing options...
lorinc Posté(e) le 28 août 2004 Partager Posté(e) le 28 août 2004 tu compile pas le DRM et ça marche??? t'obtiens des bon scores comme ça, ou c'est dans la même gamme (a savoir mauvais...) Lien vers le commentaire Partager sur d’autres sites More sharing options...
BaubLeNabot Posté(e) le 28 août 2004 Partager Posté(e) le 28 août 2004 3000 a glxgears Et l'accélération est effectivement active :) Sans le DRM Lien vers le commentaire Partager sur d’autres sites More sharing options...
mtb_s Posté(e) le 28 août 2004 Auteur Partager Posté(e) le 28 août 2004 thx c bon en suivant ske ta dit ca marche g l'accélération 3D jfé 4800fps avec un 9800 pro ché pas ske ca vo ? merci Lien vers le commentaire Partager sur d’autres sites More sharing options...
mtb_s Posté(e) le 28 août 2004 Auteur Partager Posté(e) le 28 août 2004 en fait g recompilé le noyau avec genkernel --maneconfig all y a quoi comme avantage a compiler "a la main" son noyau ? Lien vers le commentaire Partager sur d’autres sites More sharing options...
BaubLeNabot Posté(e) le 28 août 2004 Partager Posté(e) le 28 août 2004 en fait g recompilé le noyau avec genkernel --maneconfig ally a quoi comme avantage a compiler "a la main" son noyau ? Pas d'options en moins , pas d'options en trop, le plaisir de le compiler soi-meme PS : Bravo pour l'acceleration graphique :) Lien vers le commentaire Partager sur d’autres sites More sharing options...
-rem- Posté(e) le 28 août 2004 Partager Posté(e) le 28 août 2004 jfé 4800fps avec un 9800 pro ché pas ske ca vo ? Va voir du coté du topic les jeux sous linux ( cf ma signature ), tu y trouveras une banque de score, le protocole dans lequel le realiser, et tu auras ainsi un orde d'idee. Lien vers le commentaire Partager sur d’autres sites More sharing options...
mtb_s Posté(e) le 29 août 2004 Auteur Partager Posté(e) le 29 août 2004 merci pour vo conseils ! la jme lance dans la compilation de gnome juste 110 package a telecharger en 56k lol Lien vers le commentaire Partager sur d’autres sites More sharing options...
mtb_s Posté(e) le 29 août 2004 Auteur Partager Posté(e) le 29 août 2004 Va voir du coté du topic les jeux sous linux exce'l ton post pour les jeux mais jsuis pas encore la lol Lien vers le commentaire Partager sur d’autres sites More sharing options...
Terminou Posté(e) le 29 août 2004 Partager Posté(e) le 29 août 2004 merci pour vo conseils ! la jme lance dans la compilation de gnome juste 110 package a telecharger en 56k lol t po un peu malade??? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Sandeman Posté(e) le 30 août 2004 Partager Posté(e) le 30 août 2004 bon si tu veux amoindrir ta douleur : commence par sélectionner un mirroir proche de toi (histoire que tu sois A FOND sur tes 56k) man mirrorselect et puis lance tous tes downloads d'un coup emerge -fu <packages> ça t'évitera tout le temps de reco / déco ... ensuite tu auras tout le temps de faire un emerge -u <packages> Lien vers le commentaire Partager sur d’autres sites More sharing options...
mtb_s Posté(e) le 30 août 2004 Auteur Partager Posté(e) le 30 août 2004 ca c cool paske sinon y tel un truc il areete pour compiler ... c super chiant Lien vers le commentaire Partager sur d’autres sites More sharing options...
Duke98 Posté(e) le 31 août 2004 Partager Posté(e) le 31 août 2004 ben si ccache est activé , ce qui a deja été compilé n'est pas perdu si tu fait un ctrl+c (j'espère que je dis pas de connerie) nefin bon perso j'éviterais, les compilation longues ca se lance le soir avant de se coucher Lien vers le commentaire Partager sur d’autres sites More sharing options...
Poulpatine Posté(e) le 31 août 2004 Partager Posté(e) le 31 août 2004 m'enfin, pas trop quand le pc est dans la chambre ;-) Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Archivé
Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.