démarrage en mode graphique dégradé sous ubuntu 13.04

[doubleneck]

Bonjour,

Pour résoudre le problème du verrouillage numérique sur ma session ubuntu, j'ai suivi les conseils du forum ci-dessous :

http://forum.ubuntu-fr.org/viewtopic.php?id=1195811

et me retrouve au démarrage avec un message du type démarrage en mode graphique dégradé.

Comment récuperer un démarrage sans ce message (d'autant plus que le mode graphique ne semble pas si dégradé que ça !

Merci des suggestions !

(je suis novice en linux)

[seboss666]

Le mode graphique dégradé veut dire que l'accélération graphique et donc les effets de bureau sont désactivés, pas forcément que la présentation visuelle change.

Quelque chose dans le log du serveur x (je sais plus où ils l'ont collé dans Ubuntu) ?

[dudul88]

Je dirais /var/log/Xorg.0.log

Donc on peut avoir une copie de ce fichier ?

[doubleneck]

Je dirais /var/log/Xorg.0.log

Donc on peut avoir une copie de ce fichier ?

je suppose que je dois lancer la ligne dans le terminal !? si oui, celà donne ceci :

sinon, plus d'indications ?

merci d'avance !

[dudul88]

Non c'est le chemin du log dont parle seboss666. Il se trouve dans /var/log/ et c'est le fichier Xorg.0.log. Il faut partir de poste de travail je crois pour le trouver.

[seboss666]

La commande à taper c'est

cat /var/log/Xorg.0.log

(manifestement la ligne de commande c'est pas ton fort )

[doubleneck]

(manifestement la ligne de commande c'est pas ton fort )

faut bien commencer !

sinon, voici la réponse du terminal :

ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,

ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,

AMD FireStream 9250, ATI FirePro V8700 (FireGL),

ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,

ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,

ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,

ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),

ATI Mobility Radeon HD 4670, ATI FirePro M5750,

ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),

ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,

ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],

ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),

ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,

ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,

ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,

ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,

ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,

ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,

ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,

ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,

ATI Mobility Radeon HD 3850, ATI Radeon HD3850,

ATI Mobility Radeon HD 3850 X2, ATI RV670,

ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,

ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,

ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,

ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,

ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,

ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,

ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,

ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,

ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,

ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,

ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,

ATI FireGL V3600, ATI Radeon HD 2600 LE,

ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,

ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,

ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,

ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,

ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,

ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,

ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,

ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,

ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,

ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,

ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,

ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,

ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,

SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,

ATI Radeon 4100, ATI Mobility Radeon HD 4200,

ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,

AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,

AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,

AMD Radeon HD 6300 Series Graphics,

AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,

ATI FirePro (FireGL) Graphics Adapter,

ATI FirePro (FireGL) Graphics Adapter,

ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,

AMD Firestream 9350, ATI Radeon HD 5800 Series,

ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,

ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,

ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,

ATI Mobility Radeon HD 5800 Series,

ATI FirePro (FireGL) Graphics Adapter,

ATI FirePro (FireGL) Graphics Adapter,

ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,

ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,

ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,

ATI Mobility Radeon HD 5000 Series,

ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,

ATI FirePro (FireGL) Graphics Adapter,

ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,

ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,

ATI Mobility Radeon HD 5000 Series,

ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,

ATI Mobility Radeon Graphics, CEDAR,

ATI FirePro (FireGL) Graphics Adapter,

ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,

ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,

CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,

AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,

CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,

BARTS, BARTS, Mobility Radeon HD 6000 Series,

Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,

AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,

AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,

TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,

TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,

CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,

CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,

ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,

ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,

ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,

TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,

PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,

PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,

VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,

VERDE, VERDE, VERDE, VERDE, VERDE, VERDE

[ 22.206] (II) VESA: driver for VESA chipsets: vesa

[ 22.206] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[ 22.206] (II) FBDEV: driver for framebuffer: fbdev

[ 22.206] (++) using VT number 7

[ 22.206] (II) [KMS] Kernel modesetting enabled.

[ 22.206] (WW) Falling back to old probe method for vesa

[ 22.206] (WW) Falling back to old probe method for modesetting

[ 22.207] (WW) Falling back to old probe method for fbdev

[ 22.207] (II) Loading sub module "fbdevhw"

[ 22.207] (II) LoadModule: "fbdevhw"

[ 22.207] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[ 22.207] (II) Module fbdevhw: vendor="X.Org Foundation"

[ 22.207] compiled for 1.13.3, module version = 0.0.2

[ 22.207] ABI class: X.Org Video Driver, version 13.1

[ 22.207] (II) RADEON(0): Creating default Display subsection in Screen section

"Default Screen Section" for depth/fbbpp 24/32

[ 22.207] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32

[ 22.207] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

[ 22.207] (==) RADEON(0): Default visual is TrueColor

[ 22.207] (==) RADEON(0): RGB weight 888

[ 22.207] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)

[ 22.207] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)

[ 22.207] (II) Loading sub module "dri2"

[ 22.207] (II) LoadModule: "dri2"

[ 22.207] (II) Module "dri2" already built-in

[ 22.207] (II) Loading sub module "exa"

[ 22.207] (II) LoadModule: "exa"

[ 22.207] (II) Loading /usr/lib/xorg/modules/libexa.so

[ 22.207] (II) Module exa: vendor="X.Org Foundation"

[ 22.207] compiled for 1.13.3, module version = 2.6.0

[ 22.207] ABI class: X.Org Video Driver, version 13.1

[ 22.207] (II) RADEON(0): KMS Color Tiling: enabled

[ 22.207] (II) RADEON(0): KMS Color Tiling 2D: enabled

[ 22.207] (II) RADEON(0): KMS Pageflipping: enabled

[ 22.207] (II) RADEON(0): SwapBuffers wait for vsync: enabled

[ 22.210] (II) RADEON(0): Output LVDS has no monitor section

[ 22.212] (II) RADEON(0): Output HDMI-0 has no monitor section

[ 22.236] (II) RADEON(0): Output VGA-0 has no monitor section

[ 22.238] (II) RADEON(0): EDID for output LVDS

[ 22.238] (II) RADEON(0): Printing probed modes for output LVDS

[ 22.238] (II) RADEON(0): Modeline "1600x900"x60.3 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)

[ 22.238] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)

[ 22.238] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)

[ 22.238] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)

[ 22.238] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)

[ 22.238] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)

[ 22.238] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)

[ 22.238] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)

[ 22.238] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)

[ 22.238] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)

[ 22.238] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)

[ 22.240] (II) RADEON(0): EDID for output HDMI-0

[ 22.264] (II) RADEON(0): EDID for output VGA-0

[ 22.264] (II) RADEON(0): Output LVDS connected

[ 22.264] (II) RADEON(0): Output HDMI-0 disconnected

[ 22.264] (II) RADEON(0): Output VGA-0 disconnected

[ 22.264] (II) RADEON(0): Using exact sizes for initial modes

[ 22.264] (II) RADEON(0): Output LVDS using initial mode 1600x900

[ 22.264] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

[ 22.264] (II) RADEON(0): mem size init: gart size :1fdef000 vram size: s:20000000 visible:1fa3b000

[ 22.264] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM

[ 22.264] (==) RADEON(0): DPI set to (96, 96)

[ 22.264] (II) Loading sub module "fb"

[ 22.264] (II) LoadModule: "fb"

[ 22.264] (II) Loading /usr/lib/xorg/modules/libfb.so

[ 22.264] (II) Module fb: vendor="X.Org Foundation"

[ 22.264] compiled for 1.13.3, module version = 1.0.0

[ 22.264] ABI class: X.Org ANSI C Emulation, version 0.4

[ 22.264] (II) Loading sub module "ramdac"

[ 22.264] (II) LoadModule: "ramdac"

[ 22.264] (II) Module "ramdac" already built-in

[ 22.264] (II) UnloadModule: "vesa"

[ 22.264] (II) Unloading vesa

[ 22.264] (II) UnloadModule: "modesetting"

[ 22.264] (II) Unloading modesetting

[ 22.264] (II) UnloadModule: "fbdev"

[ 22.264] (II) Unloading fbdev

[ 22.264] (II) UnloadSubModule: "fbdevhw"

[ 22.264] (II) Unloading fbdevhw

[ 22.265] (--) Depth 24 pixmap format is 32 bpp

[ 22.265] (II) RADEON(0): [DRI2] Setup complete

[ 22.265] (II) RADEON(0): [DRI2] DRI driver: r600

[ 22.265] (II) RADEON(0): [DRI2] VDPAU driver: r600

[ 22.265] (II) RADEON(0): Front buffer size: 6000K

[ 22.265] (II) RADEON(0): VRAM usage limit set to 461084K

[ 22.265] (==) RADEON(0): Backing store disabled

[ 22.265] (II) RADEON(0): Direct rendering enabled

[ 22.265] (II) EXA(0): Driver allocated offscreen pixmaps

[ 22.265] (II) EXA(0): Driver registered support for the following operations:

[ 22.265] (II) Solid

[ 22.265] (II) Copy

[ 22.265] (II) Composite (RENDER acceleration)

[ 22.265] (II) UploadToScreen

[ 22.265] (II) DownloadFromScreen

[ 22.265] (II) RADEON(0): Acceleration enabled

[ 22.265] (==) RADEON(0): DPMS enabled

[ 22.265] (==) RADEON(0): Silken mouse enabled

[ 22.265] (II) RADEON(0): Set up textured video

[ 22.265] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.

[ 22.265] (II) RADEON(0): [XvMC] Extension initialized.

[ 22.265] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[ 22.265] (--) RandR disabled

[ 22.274] (II) SELinux: Disabled on system

[ 22.583] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[ 22.583] (II) AIGLX: enabled GLX_INTEL_swap_event

[ 22.583] (II) AIGLX: enabled GLX_ARB_create_context

[ 22.583] (II) AIGLX: enabled GLX_ARB_create_context_profile

[ 22.583] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile

[ 22.583] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control

[ 22.583] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[ 22.584] (II) AIGLX: Loaded and initialized r600

[ 22.584] (II) GLX: Initialized DRI2 GL provider for screen 0

[ 22.585] (II) RADEON(0): Setting screen physical size to 423 x 238

[ 22.617] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm

[ 22.620] (II) config/udev: Adding input device Power Button (/dev/input/event2)

[ 22.620] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[ 22.620] (II) LoadModule: "evdev"

[ 22.621] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[ 22.628] (II) Module evdev: vendor="X.Org Foundation"

[ 22.628] compiled for 1.13.3, module version = 2.7.3

[ 22.628] Module class: X.Org XInput Driver

[ 22.628] ABI class: X.Org XInput driver, version 18.0

[ 22.628] (II) Using input driver 'evdev' for 'Power Button'

[ 22.628] (**) Power Button: always reports core events

[ 22.629] (**) evdev: Power Button: Device: "/dev/input/event2"

[ 22.629] (--) evdev: Power Button: Vendor 0 Product 0x1

[ 22.629] (--) evdev: Power Button: Found keys

[ 22.629] (II) evdev: Power Button: Configuring as keyboard

[ 22.629] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"

[ 22.629] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[ 22.629] (**) Option "xkb_rules" "evdev"

[ 22.629] (**) Option "xkb_model" "pc105"

[ 22.629] (**) Option "xkb_layout" "fr"

[ 22.629] (**) Option "xkb_variant" "latin9"

[ 22.635] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm

[ 22.637] (II) config/udev: Adding input device Video Bus (/dev/input/event5)

[ 22.637] (**) Video Bus: Applying InputClass "evdev keyboard catchall"

[ 22.637] (II) Using input driver 'evdev' for 'Video Bus'

[ 22.637] (**) Video Bus: always reports core events

[ 22.637] (**) evdev: Video Bus: Device: "/dev/input/event5"

[ 22.637] (--) evdev: Video Bus: Vendor 0 Product 0x6

[ 22.637] (--) evdev: Video Bus: Found keys

[ 22.637] (II) evdev: Video Bus: Configuring as keyboard

[ 22.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"

[ 22.637] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[ 22.637] (**) Option "xkb_rules" "evdev"

[ 22.637] (**) Option "xkb_model" "pc105"

[ 22.637] (**) Option "xkb_layout" "fr"

[ 22.637] (**) Option "xkb_variant" "latin9"

[ 22.638] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)

[ 22.638] (II) No input driver specified, ignoring this device.

[ 22.638] (II) This device may have been added with another device file.

[ 22.639] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)

[ 22.639] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"

[ 22.639] (II) Using input driver 'evdev' for 'Sleep Button'

[ 22.639] (**) Sleep Button: always reports core events

[ 22.639] (**) evdev: Sleep Button: Device: "/dev/input/event1"

[ 22.639] (--) evdev: Sleep Button: Vendor 0 Product 0x3

[ 22.639] (--) evdev: Sleep Button: Found keys

[ 22.639] (II) evdev: Sleep Button: Configuring as keyboard

[ 22.639] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"

[ 22.639] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id

[ 22.639] (**) Option "xkb_rules" "evdev"

[ 22.639] (**) Option "xkb_model" "pc105"

[ 22.639] (**) Option "xkb_layout" "fr"

[ 22.639] (**) Option "xkb_variant" "latin9"

[ 22.640] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card0

[ 22.640] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)

[ 22.641] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)

[ 22.641] (II) No input driver specified, ignoring this device.

[ 22.641] (II) This device may have been added with another device file.

[ 22.641] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event6)

[ 22.641] (II) No input driver specified, ignoring this device.

[ 22.641] (II) This device may have been added with another device file.

[ 22.642] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event7)

[ 22.642] (II) No input driver specified, ignoring this device.

[ 22.642] (II) This device may have been added with another device file.

[ 22.642] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/event4)

[ 22.642] (**) Logitech Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"

[ 22.642] (II) Using input driver 'evdev' for 'Logitech Logitech USB Optical Mouse'

[ 22.642] (**) Logitech Logitech USB Optical Mouse: always reports core events

[ 22.642] (**) evdev: Logitech Logitech USB Optical Mouse: Device: "/dev/input/event4"

[ 22.642] (--) evdev: Logitech Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018

[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found 3 mouse buttons

[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found scroll wheel(s)

[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found relative axes

[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found x and y relative axes

[ 22.643] (II) evdev: Logitech Logitech USB Optical Mouse: Configuring as mouse

[ 22.643] (II) evdev: Logitech Logitech USB Optical Mouse: Adding scrollwheel support

[ 22.643] (**) evdev: Logitech Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5

[ 22.643] (**) evdev: Logitech Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[ 22.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4/event4"

[ 22.643] (II) XINPUT: Adding extended input device "Logitech Logitech USB Optical Mouse" (type: MOUSE, id 9)

[ 22.643] (II) evdev: Logitech Logitech USB Optical Mouse: initialized for relative axes.

[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1

[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration profile 0

[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration factor: 2.000

[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration threshold: 4

[ 22.644] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/mouse0)

[ 22.644] (II) No input driver specified, ignoring this device.

[ 22.644] (II) This device may have been added with another device file.

[ 22.644] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8)

[ 22.644] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"

[ 22.644] (II) Using input driver 'evdev' for '1.3M WebCam'

[ 22.644] (**) 1.3M WebCam: always reports core events

[ 22.644] (**) evdev: 1.3M WebCam: Device: "/dev/input/event8"

[ 22.645] (--) evdev: 1.3M WebCam: Vendor 0x402 Product 0x9665

[ 22.645] (--) evdev: 1.3M WebCam: Found keys

[ 22.645] (II) evdev: 1.3M WebCam: Configuring as keyboard

[ 22.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8/event8"

[ 22.645] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 10)

[ 22.645] (**) Option "xkb_rules" "evdev"

[ 22.645] (**) Option "xkb_model" "pc105"

[ 22.645] (**) Option "xkb_layout" "fr"

[ 22.645] (**) Option "xkb_variant" "latin9"

[ 22.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)

[ 22.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"

[ 22.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'

[ 22.646] (**) AT Translated Set 2 keyboard: always reports core events

[ 22.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"

[ 22.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1

[ 22.646] (--) evdev: AT Translated Set 2 keyboard: Found keys

[ 22.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard

[ 22.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"

[ 22.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)

[ 22.646] (**) Option "xkb_rules" "evdev"

[ 22.646] (**) Option "xkb_model" "pc105"

[ 22.646] (**) Option "xkb_layout" "fr"

[ 22.646] (**) Option "xkb_variant" "latin9"

[ 22.647] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event12)

[ 22.647] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"

[ 22.647] (II) Using input driver 'evdev' for 'PS/2 Mouse'

[ 22.647] (**) PS/2 Mouse: always reports core events

[ 22.647] (**) evdev: PS/2 Mouse: Device: "/dev/input/event12"

[ 22.647] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8

[ 22.647] (--) evdev: PS/2 Mouse: Found 3 mouse buttons

[ 22.647] (--) evdev: PS/2 Mouse: Found relative axes

[ 22.647] (--) evdev: PS/2 Mouse: Found x and y relative axes

[ 22.647] (II) evdev: PS/2 Mouse: Configuring as mouse

[ 22.647] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5

[ 22.647] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[ 22.647] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"

[ 22.647] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 12)

[ 22.647] (II) evdev: PS/2 Mouse: initialized for relative axes.

[ 22.648] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1

[ 22.648] (**) PS/2 Mouse: (accel) acceleration profile 0

[ 22.648] (**) PS/2 Mouse: (accel) acceleration factor: 2.000

[ 22.648] (**) PS/2 Mouse: (accel) acceleration threshold: 4

[ 22.648] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)

[ 22.648] (II) No input driver specified, ignoring this device.

[ 22.648] (II) This device may have been added with another device file.

[ 22.649] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event13)

[ 22.649] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"

[ 22.649] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"

[ 22.649] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"

[ 22.649] (II) LoadModule: "synaptics"

[ 22.649] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so

[ 22.649] (II) Module synaptics: vendor="X.Org Foundation"

[ 22.650] compiled for 1.13.1.901, module version = 1.6.2

[ 22.650] Module class: X.Org XInput Driver

[ 22.650] ABI class: X.Org XInput driver, version 18.0

[ 22.650] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'

[ 22.650] (**) AlpsPS/2 ALPS GlidePoint: always reports core events

[ 22.650] (**) Option "Device" "/dev/input/event13"

[ 22.652] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127

[ 22.652] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15

[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found

[ 22.652] (**) AlpsPS/2 ALPS GlidePoint: always reports core events

[ 22.656] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"

[ 22.656] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)

[ 22.656] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5

[ 22.656] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75

[ 22.656] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.082

[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1

[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1

[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000

[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4

[ 22.656] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found

[ 22.656] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)

[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"

[ 22.658] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event10)

[ 22.658] (II) No input driver specified, ignoring this device.

[ 22.659] (II) This device may have been added with another device file.

[ 22.659] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)

[ 22.659] (II) No input driver specified, ignoring this device.

[ 22.659] (II) This device may have been added with another device file.

[ 22.659] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event9)

[ 22.659] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"

[ 22.659] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'

[ 22.659] (**) Acer WMI hotkeys: always reports core events

[ 22.659] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event9"

[ 22.659] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0

[ 22.659] (--) evdev: Acer WMI hotkeys: Found keys

[ 22.659] (II) evdev: Acer WMI hotkeys: Configuring as keyboard

[ 22.659] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"

[ 22.659] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)

[ 22.659] (**) Option "xkb_rules" "evdev"

[ 22.659] (**) Option "xkb_model" "pc105"

[ 22.659] (**) Option "xkb_layout" "fr"

[ 22.659] (**) Option "xkb_variant" "latin9"

[ 22.996] (II) evdev: Acer WMI hotkeys: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) UnloadModule: "synaptics"

[ 22.996] (II) evdev: PS/2 Mouse: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) evdev: AT Translated Set 2 keyboard: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) evdev: 1.3M WebCam: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) evdev: Logitech Logitech USB Optical Mouse: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) evdev: Sleep Button: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) evdev: Video Bus: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 22.996] (II) evdev: Power Button: Close

[ 22.996] (II) UnloadModule: "evdev"

[ 23.007] Server terminated successfully (0). Closing log file.

jacques@jacques:~$

voilà !

PS : je suis même prêt à apprendre !

[seboss666]

PS : je suis même prêt à apprendre !

Mais j'espère bien (même si c'est pas indispensable dans la pratique quotidienne). Bon alors pas de bol, je vois pas d'erreur, et à priori, tu utilises le pilote libre Radeon, qui normalement ne pose pas de problème pour Unity.

et /var/log/syslog il dit quoi ? (toujours par la commande cat hein )

[dudul88]

Il en manque un bout en fait. Il faudrait nous donner le fichier complet pour être sûr.

[doubleneck]

pour la commande suivant voilà ce que j'ai :

jacques@jacques:~$ cat /var/log/syslog
Jun 6 18:22:50 jacques anacron[1092]: Job `cron.daily' terminated
Jun 6 18:22:50 jacques anacron[1092]: Normal exit (1 job run)
Jun 6 19:17:01 jacques CRON[3358]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 6 19:43:14 jacques wpa_supplicant[984]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:24:d4:60:0f:f0 reason=4
Jun 6 19:43:14 jacques kernel: [ 6487.038648] cfg80211: Calling CRDA to update world regulatory domain
Jun 6 19:43:14 jacques NetworkManager[974]: <info> (wlan0): supplicant interface state: completed -> disconnected
Jun 6 19:43:14 jacques kernel: [ 6487.050325] cfg80211: World regulatory domain updated:
Jun 6 19:43:14 jacques kernel: [ 6487.050329] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 6 19:43:14 jacques kernel: [ 6487.050332] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 6 19:43:14 jacques kernel: [ 6487.050334] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 6 19:43:14 jacques kernel: [ 6487.050336] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 6 19:43:14 jacques kernel: [ 6487.050337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 6 19:43:14 jacques kernel: [ 6487.050339] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 6 19:43:14 jacques NetworkManager[974]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Jun 6 19:43:15 jacques kernel: [ 6488.022618] wlan0: authenticate with 00:24:d4:60:0f:f0
Jun 6 19:43:15 jacques wpa_supplicant[984]: wlan0: SME: Trying to authenticate with 00:24:d4:60:0f:f0 (SSID='wififi' freq=2462 MHz)
Jun 6 19:43:15 jacques kernel: [ 6488.039324] wlan0: send auth to 00:24:d4:60:0f:f0 (try 1/3)
Jun 6 19:43:15 jacques wpa_supplicant[984]: wlan0: Trying to associate with 00:24:d4:60:0f:f0 (SSID='wififi' freq=2462 MHz)
Jun 6 19:43:15 jacques kernel: [ 6488.042085] wlan0: authenticated
Jun 6 19:43:15 jacques NetworkManager[974]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Jun 6 19:43:15 jacques kernel: [ 6488.045274] wlan0: associate with 00:24:d4:60:0f:f0 (try 1/3)
Jun 6 19:43:15 jacques NetworkManager[974]: <info> (wlan0): supplicant interface state: authenticating -> associating
Jun 6 19:43:15 jacques wpa_supplicant[984]: wlan0: Associated with 00:24:d4:60:0f:f0
Jun 6 19:43:15 jacques kernel: [ 6488.052098] wlan0: RX AssocResp from 00:24:d4:60:0f:f0 (capab=0x411 status=0 aid=1)
Jun 6 19:43:15 jacques kernel: [ 6488.052182] wlan0: associated
Jun 6 19:43:15 jacques NetworkManager[974]: <info> (wlan0): supplicant interface state: associating -> group handshake
Jun 6 19:43:15 jacques wpa_supplicant[984]: wlan0: WPA: Key negotiation completed with 00:24:d4:60:0f:f0 [PTK=CCMP GTK=TKIP]
Jun 6 19:43:15 jacques wpa_supplicant[984]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:24:d4:60:0f:f0 completed (reauth) [id=0 id_str=]
Jun 6 19:43:15 jacques NetworkManager[974]: <info> (wlan0): supplicant interface state: group handshake -> completed
Jun 6 19:53:31 jacques dbus[917]: [system] Activating service name='org.freedesktop.hostname1' (using servicehelper)
Jun 6 19:53:31 jacques dbus[917]: [system] Successfully activated service 'org.freedesktop.hostname1'
Jun 6 20:17:01 jacques CRON[3489]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 6 21:17:01 jacques CRON[3538]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
jacques@jacques:~$

j'espère que ça sera plus "parlant" !

Il en manque un bout en fait. Il faudrait nous donner le fichier complet pour être sûr.

Je viens de relancer la commande et, apparemment, c'est la meme chose !

[dudul88]

Bon je vais essayer d'être plus clair. Tape dans le terminal :

gedit /var/log/Xorg.0.log

Là tu devais avoir ton fichier complet, copie-colle ce qui y est.

[doubleneck]

Désolé !

ok ! la commande gedit ouvre le fichier !

donc voici ce que j'obtiens :

[ 22.034]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 22.035] X Protocol Version 11, Revision 0
[ 22.035] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 22.035] Current Operating System: Linux jacques 3.8.0-23-generic #34-Ubuntu SMP Wed May 29 20:24:54 UTC 2013 i686
[ 22.035] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-23-generic root=UUID=b15cdcce-2026-40d3-a000-e4f0d6b94c79 ro quiet splash vt.handoff=7
[ 22.035] Build Date: 17 April 2013 10:42:56PM
[ 22.035] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[ 22.035] Current version of pixman: 0.28.2
[ 22.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.035] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.035] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 6 17:55:26 2013
[ 22.054] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.054] (==) No Layout section. Using the first Screen section.
[ 22.054] (==) No screen section available. Using defaults.
[ 22.054] (**) |-->Screen "Default Screen Section" (0)
[ 22.054] (**) | |-->Monitor "<default monitor>"
[ 22.054] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.054] (==) Automatically adding devices
[ 22.054] (==) Automatically enabling devices
[ 22.054] (==) Automatically adding GPU devices
[ 22.054] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 22.054] Entry deleted from font path.
[ 22.054] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 22.054] Entry deleted from font path.
[ 22.054] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 22.055] Entry deleted from font path.
[ 22.055] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 22.055] Entry deleted from font path.
[ 22.055] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 22.055] Entry deleted from font path.
[ 22.055] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 22.055] Entry deleted from font path.
[ 22.055] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 22.055] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 22.055] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.055] (II) Loader magic: 0xb77336a0
[ 22.055] (II) Module ABI versions:
[ 22.055] X.Org ANSI C Emulation: 0.4
[ 22.055] X.Org Video Driver: 13.1
[ 22.055] X.Org XInput driver : 18.0
[ 22.055] X.Org Server Extension : 7.0
[ 22.055] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 22.056] (--) PCI:*(0:2:0:0) 1002:68e0:1025:037e rev 0, Mem @ 0xd0000000/268435456, 0xcfee0000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 22.056] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22.056] Initializing built-in extension Generic Event Extension
[ 22.056] Initializing built-in extension SHAPE
[ 22.056] Initializing built-in extension MIT-SHM
[ 22.056] Initializing built-in extension XInputExtension
[ 22.056] Initializing built-in extension XTEST
[ 22.056] Initializing built-in extension BIG-REQUESTS
[ 22.056] Initializing built-in extension SYNC
[ 22.056] Initializing built-in extension XKEYBOARD
[ 22.056] Initializing built-in extension XC-MISC
[ 22.056] Initializing built-in extension SECURITY
[ 22.056] Initializing built-in extension XINERAMA
[ 22.056] Initializing built-in extension XFIXES
[ 22.056] Initializing built-in extension RENDER
[ 22.056] Initializing built-in extension RANDR
[ 22.056] Initializing built-in extension COMPOSITE
[ 22.056] Initializing built-in extension DAMAGE
[ 22.056] Initializing built-in extension MIT-SCREEN-SAVER
[ 22.056] Initializing built-in extension DOUBLE-BUFFER
[ 22.056] Initializing built-in extension RECORD
[ 22.056] Initializing built-in extension DPMS
[ 22.056] Initializing built-in extension X-Resource
[ 22.056] Initializing built-in extension XVideo
[ 22.056] Initializing built-in extension XVideo-MotionCompensation
[ 22.056] Initializing built-in extension SELinux
[ 22.056] Initializing built-in extension XFree86-VidModeExtension
[ 22.056] Initializing built-in extension XFree86-DGA
[ 22.056] Initializing built-in extension XFree86-DRI
[ 22.056] Initializing built-in extension DRI2
[ 22.056] (II) LoadModule: "glx"
[ 22.140] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.140] (II) Module glx: vendor="X.Org Foundation"
[ 22.140] compiled for 1.13.3, module version = 1.0.0
[ 22.140] ABI class: X.Org Server Extension, version 7.0
[ 22.140] (==) AIGLX enabled
[ 22.140] Loading extension GLX
[ 22.140] (==) Matched fglrx as autoconfigured driver 0
[ 22.140] (==) Matched ati as autoconfigured driver 1
[ 22.140] (==) Matched fglrx as autoconfigured driver 2
[ 22.140] (==) Matched ati as autoconfigured driver 3
[ 22.140] (==) Matched vesa as autoconfigured driver 4
[ 22.140] (==) Matched modesetting as autoconfigured driver 5
[ 22.140] (==) Matched fbdev as autoconfigured driver 6
[ 22.140] (==) Assigned the driver to the xf86ConfigLayout
[ 22.140] (II) LoadModule: "fglrx"
[ 22.157] (WW) Warning, couldn't open module fglrx
[ 22.157] (II) UnloadModule: "fglrx"
[ 22.157] (II) Unloading fglrx
[ 22.157] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 22.157] (II) LoadModule: "ati"
[ 22.157] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 22.157] (II) Module ati: vendor="X.Org Foundation"
[ 22.157] compiled for 1.13.3, module version = 7.1.0
[ 22.157] Module class: X.Org Video Driver
[ 22.157] ABI class: X.Org Video Driver, version 13.1
[ 22.157] (II) LoadModule: "radeon"
[ 22.158] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 22.202] (II) Module radeon: vendor="X.Org Foundation"
[ 22.202] compiled for 1.13.3, module version = 7.1.0
[ 22.202] Module class: X.Org Video Driver
[ 22.202] ABI class: X.Org Video Driver, version 13.1
[ 22.202] (II) LoadModule: "vesa"
[ 22.202] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.202] (II) Module vesa: vendor="X.Org Foundation"
[ 22.202] compiled for 1.12.99.902, module version = 2.3.2
[ 22.202] Module class: X.Org Video Driver
[ 22.202] ABI class: X.Org Video Driver, version 13.0
[ 22.202] (II) LoadModule: "modesetting"
[ 22.202] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 22.202] (II) Module modesetting: vendor="X.Org Foundation"
[ 22.202] compiled for 1.13.3, module version = 0.7.0
[ 22.202] Module class: X.Org Video Driver
[ 22.202] ABI class: X.Org Video Driver, version 13.1
[ 22.202] (II) LoadModule: "fbdev"
[ 22.203] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 22.203] (II) Module fbdev: vendor="X.Org Foundation"
[ 22.203] compiled for 1.12.99.902, module version = 0.4.3
[ 22.203] Module class: X.Org Video Driver
[ 22.203] ABI class: X.Org Video Driver, version 13.0
[ 22.203] (==) Matched fglrx as autoconfigured driver 0
[ 22.203] (==) Matched ati as autoconfigured driver 1
[ 22.203] (==) Matched fglrx as autoconfigured driver 2
[ 22.203] (==) Matched ati as autoconfigured driver 3
[ 22.203] (==) Matched vesa as autoconfigured driver 4
[ 22.203] (==) Matched modesetting as autoconfigured driver 5
[ 22.203] (==) Matched fbdev as autoconfigured driver 6
[ 22.203] (==) Assigned the driver to the xf86ConfigLayout
[ 22.203] (II) LoadModule: "fglrx"
[ 22.203] (WW) Warning, couldn't open module fglrx
[ 22.203] (II) UnloadModule: "fglrx"
[ 22.203] (II) Unloading fglrx
[ 22.203] (EE) Failed to load module "fglrx" (module does not exist, 0)
[ 22.203] (II) LoadModule: "ati"
[ 22.203] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 22.203] (II) Module ati: vendor="X.Org Foundation"
[ 22.203] compiled for 1.13.3, module version = 7.1.0
[ 22.203] Module class: X.Org Video Driver
[ 22.203] ABI class: X.Org Video Driver, version 13.1
[ 22.203] (II) LoadModule: "vesa"
[ 22.203] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.203] (II) Module vesa: vendor="X.Org Foundation"
[ 22.203] compiled for 1.12.99.902, module version = 2.3.2
[ 22.203] Module class: X.Org Video Driver
[ 22.203] ABI class: X.Org Video Driver, version 13.0
[ 22.203] (II) UnloadModule: "vesa"
[ 22.203] (II) Unloading vesa
[ 22.203] (II) Failed to load module "vesa" (already loaded, 0)
[ 22.203] (II) LoadModule: "modesetting"
[ 22.204] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 22.204] (II) Module modesetting: vendor="X.Org Foundation"
[ 22.204] compiled for 1.13.3, module version = 0.7.0
[ 22.204] Module class: X.Org Video Driver
[ 22.204] ABI class: X.Org Video Driver, version 13.1
[ 22.204] (II) UnloadModule: "modesetting"
[ 22.204] (II) Unloading modesetting
[ 22.204] (II) Failed to load module "modesetting" (already loaded, 0)
[ 22.204] (II) LoadModule: "fbdev"
[ 22.204] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 22.204] (II) Module fbdev: vendor="X.Org Foundation"
[ 22.204] compiled for 1.12.99.902, module version = 0.4.3
[ 22.204] Module class: X.Org Video Driver
[ 22.204] ABI class: X.Org Video Driver, version 13.0
[ 22.204] (II) UnloadModule: "fbdev"
[ 22.204] (II) Unloading fbdev
[ 22.204] (II) Failed to load module "fbdev" (already loaded, 0)
[ 22.204] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
[ 22.206] (II) VESA: driver for VESA chipsets: vesa
[ 22.206] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 22.206] (II) FBDEV: driver for framebuffer: fbdev
[ 22.206] (++) using VT number 7

[ 22.206] (II) [KMS] Kernel modesetting enabled.
[ 22.206] (WW) Falling back to old probe method for vesa
[ 22.206] (WW) Falling back to old probe method for modesetting
[ 22.207] (WW) Falling back to old probe method for fbdev
[ 22.207] (II) Loading sub module "fbdevhw"
[ 22.207] (II) LoadModule: "fbdevhw"
[ 22.207] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 22.207] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 22.207] compiled for 1.13.3, module version = 0.0.2
[ 22.207] ABI class: X.Org Video Driver, version 13.1
[ 22.207] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.207] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 22.207] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 22.207] (==) RADEON(0): Default visual is TrueColor
[ 22.207] (==) RADEON(0): RGB weight 888
[ 22.207] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 22.207] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68e0)
[ 22.207] (II) Loading sub module "dri2"
[ 22.207] (II) LoadModule: "dri2"
[ 22.207] (II) Module "dri2" already built-in
[ 22.207] (II) Loading sub module "exa"
[ 22.207] (II) LoadModule: "exa"
[ 22.207] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 22.207] (II) Module exa: vendor="X.Org Foundation"
[ 22.207] compiled for 1.13.3, module version = 2.6.0
[ 22.207] ABI class: X.Org Video Driver, version 13.1
[ 22.207] (II) RADEON(0): KMS Color Tiling: enabled
[ 22.207] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 22.207] (II) RADEON(0): KMS Pageflipping: enabled
[ 22.207] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 22.210] (II) RADEON(0): Output LVDS has no monitor section
[ 22.212] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 22.236] (II) RADEON(0): Output VGA-0 has no monitor section
[ 22.238] (II) RADEON(0): EDID for output LVDS
[ 22.238] (II) RADEON(0): Printing probed modes for output LVDS
[ 22.238] (II) RADEON(0): Modeline "1600x900"x60.3 110.00 1600 1648 1680 2000 900 903 909 912 -hsync -vsync (55.0 kHz eP)
[ 22.238] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 22.238] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 22.238] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 22.238] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 22.238] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 22.238] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 22.238] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 22.238] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 22.238] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 22.238] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 22.240] (II) RADEON(0): EDID for output HDMI-0
[ 22.264] (II) RADEON(0): EDID for output VGA-0
[ 22.264] (II) RADEON(0): Output LVDS connected
[ 22.264] (II) RADEON(0): Output HDMI-0 disconnected
[ 22.264] (II) RADEON(0): Output VGA-0 disconnected
[ 22.264] (II) RADEON(0): Using exact sizes for initial modes
[ 22.264] (II) RADEON(0): Output LVDS using initial mode 1600x900
[ 22.264] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 22.264] (II) RADEON(0): mem size init: gart size :1fdef000 vram size: s:20000000 visible:1fa3b000
[ 22.264] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 22.264] (==) RADEON(0): DPI set to (96, 96)
[ 22.264] (II) Loading sub module "fb"
[ 22.264] (II) LoadModule: "fb"
[ 22.264] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.264] (II) Module fb: vendor="X.Org Foundation"
[ 22.264] compiled for 1.13.3, module version = 1.0.0
[ 22.264] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.264] (II) Loading sub module "ramdac"
[ 22.264] (II) LoadModule: "ramdac"
[ 22.264] (II) Module "ramdac" already built-in
[ 22.264] (II) UnloadModule: "vesa"
[ 22.264] (II) Unloading vesa
[ 22.264] (II) UnloadModule: "modesetting"
[ 22.264] (II) Unloading modesetting
[ 22.264] (II) UnloadModule: "fbdev"
[ 22.264] (II) Unloading fbdev
[ 22.264] (II) UnloadSubModule: "fbdevhw"
[ 22.264] (II) Unloading fbdevhw
[ 22.265] (--) Depth 24 pixmap format is 32 bpp
[ 22.265] (II) RADEON(0): [DRI2] Setup complete
[ 22.265] (II) RADEON(0): [DRI2] DRI driver: r600
[ 22.265] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 22.265] (II) RADEON(0): Front buffer size: 6000K
[ 22.265] (II) RADEON(0): VRAM usage limit set to 461084K
[ 22.265] (==) RADEON(0): Backing store disabled
[ 22.265] (II) RADEON(0): Direct rendering enabled
[ 22.265] (II) EXA(0): Driver allocated offscreen pixmaps
[ 22.265] (II) EXA(0): Driver registered support for the following operations:
[ 22.265] (II) Solid
[ 22.265] (II) Copy
[ 22.265] (II) Composite (RENDER acceleration)
[ 22.265] (II) UploadToScreen
[ 22.265] (II) DownloadFromScreen
[ 22.265] (II) RADEON(0): Acceleration enabled
[ 22.265] (==) RADEON(0): DPMS enabled
[ 22.265] (==) RADEON(0): Silken mouse enabled
[ 22.265] (II) RADEON(0): Set up textured video
[ 22.265] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 22.265] (II) RADEON(0): [XvMC] Extension initialized.
[ 22.265] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.265] (--) RandR disabled
[ 22.274] (II) SELinux: Disabled on system
[ 22.583] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 22.583] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 22.583] (II) AIGLX: enabled GLX_ARB_create_context
[ 22.583] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 22.583] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 22.583] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 22.583] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 22.584] (II) AIGLX: Loaded and initialized r600
[ 22.584] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 22.585] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 22.617] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 22.620] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 22.620] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.620] (II) LoadModule: "evdev"
[ 22.621] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.628] (II) Module evdev: vendor="X.Org Foundation"
[ 22.628] compiled for 1.13.3, module version = 2.7.3
[ 22.628] Module class: X.Org XInput Driver
[ 22.628] ABI class: X.Org XInput driver, version 18.0
[ 22.628] (II) Using input driver 'evdev' for 'Power Button'
[ 22.628] (**) Power Button: always reports core events
[ 22.629] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 22.629] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.629] (--) evdev: Power Button: Found keys
[ 22.629] (II) evdev: Power Button: Configuring as keyboard
[ 22.629] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 22.629] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 22.629] (**) Option "xkb_rules" "evdev"
[ 22.629] (**) Option "xkb_model" "pc105"
[ 22.629] (**) Option "xkb_layout" "fr"
[ 22.629] (**) Option "xkb_variant" "latin9"
[ 22.635] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[ 22.637] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 22.637] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.637] (II) Using input driver 'evdev' for 'Video Bus'
[ 22.637] (**) Video Bus: always reports core events
[ 22.637] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 22.637] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 22.637] (--) evdev: Video Bus: Found keys
[ 22.637] (II) evdev: Video Bus: Configuring as keyboard
[ 22.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"
[ 22.637] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 22.637] (**) Option "xkb_rules" "evdev"
[ 22.637] (**) Option "xkb_model" "pc105"
[ 22.637] (**) Option "xkb_layout" "fr"
[ 22.637] (**) Option "xkb_variant" "latin9"
[ 22.638] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 22.638] (II) No input driver specified, ignoring this device.
[ 22.638] (II) This device may have been added with another device file.
[ 22.639] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 22.639] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 22.639] (II) Using input driver 'evdev' for 'Sleep Button'
[ 22.639] (**) Sleep Button: always reports core events
[ 22.639] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 22.639] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 22.639] (--) evdev: Sleep Button: Found keys
[ 22.639] (II) evdev: Sleep Button: Configuring as keyboard
[ 22.639] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 22.639] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id
[ 22.639] (**) Option "xkb_rules" "evdev"
[ 22.639] (**) Option "xkb_model" "pc105"
[ 22.639] (**) Option "xkb_layout" "fr"
[ 22.639] (**) Option "xkb_variant" "latin9"
[ 22.640] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card0
[ 22.640] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 22.641] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[ 22.641] (II) No input driver specified, ignoring this device.
[ 22.641] (II) This device may have been added with another device file.
[ 22.641] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event6)
[ 22.641] (II) No input driver specified, ignoring this device.
[ 22.641] (II) This device may have been added with another device file.
[ 22.642] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event7)
[ 22.642] (II) No input driver specified, ignoring this device.
[ 22.642] (II) This device may have been added with another device file.
[ 22.642] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/event4)
[ 22.642] (**) Logitech Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 22.642] (II) Using input driver 'evdev' for 'Logitech Logitech USB Optical Mouse'
[ 22.642] (**) Logitech Logitech USB Optical Mouse: always reports core events
[ 22.642] (**) evdev: Logitech Logitech USB Optical Mouse: Device: "/dev/input/event4"
[ 22.642] (--) evdev: Logitech Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found 3 mouse buttons
[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found scroll wheel(s)
[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found relative axes
[ 22.643] (--) evdev: Logitech Logitech USB Optical Mouse: Found x and y relative axes
[ 22.643] (II) evdev: Logitech Logitech USB Optical Mouse: Configuring as mouse
[ 22.643] (II) evdev: Logitech Logitech USB Optical Mouse: Adding scrollwheel support
[ 22.643] (**) evdev: Logitech Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 22.643] (**) evdev: Logitech Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4/event4"
[ 22.643] (II) XINPUT: Adding extended input device "Logitech Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 22.643] (II) evdev: Logitech Logitech USB Optical Mouse: initialized for relative axes.
[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 22.643] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 22.644] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/mouse0)
[ 22.644] (II) No input driver specified, ignoring this device.
[ 22.644] (II) This device may have been added with another device file.
[ 22.644] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8)
[ 22.644] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 22.644] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 22.644] (**) 1.3M WebCam: always reports core events
[ 22.644] (**) evdev: 1.3M WebCam: Device: "/dev/input/event8"
[ 22.645] (--) evdev: 1.3M WebCam: Vendor 0x402 Product 0x9665
[ 22.645] (--) evdev: 1.3M WebCam: Found keys
[ 22.645] (II) evdev: 1.3M WebCam: Configuring as keyboard
[ 22.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8/event8"
[ 22.645] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 10)
[ 22.645] (**) Option "xkb_rules" "evdev"
[ 22.645] (**) Option "xkb_model" "pc105"
[ 22.645] (**) Option "xkb_layout" "fr"
[ 22.645] (**) Option "xkb_variant" "latin9"
[ 22.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 22.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 22.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 22.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 22.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 22.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 22.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 22.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 22.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 22.646] (**) Option "xkb_rules" "evdev"
[ 22.646] (**) Option "xkb_model" "pc105"
[ 22.646] (**) Option "xkb_layout" "fr"
[ 22.646] (**) Option "xkb_variant" "latin9"
[ 22.647] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event12)
[ 22.647] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 22.647] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 22.647] (**) PS/2 Mouse: always reports core events
[ 22.647] (**) evdev: PS/2 Mouse: Device: "/dev/input/event12"
[ 22.647] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[ 22.647] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[ 22.647] (--) evdev: PS/2 Mouse: Found relative axes
[ 22.647] (--) evdev: PS/2 Mouse: Found x and y relative axes
[ 22.647] (II) evdev: PS/2 Mouse: Configuring as mouse
[ 22.647] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 22.647] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.647] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[ 22.647] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 12)
[ 22.647] (II) evdev: PS/2 Mouse: initialized for relative axes.
[ 22.648] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 22.648] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 22.648] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 22.648] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 22.648] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[ 22.648] (II) No input driver specified, ignoring this device.
[ 22.648] (II) This device may have been added with another device file.
[ 22.649] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event13)
[ 22.649] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 22.649] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 22.649] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 22.649] (II) LoadModule: "synaptics"
[ 22.649] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22.649] (II) Module synaptics: vendor="X.Org Foundation"
[ 22.650] compiled for 1.13.1.901, module version = 1.6.2
[ 22.650] Module class: X.Org XInput Driver
[ 22.650] ABI class: X.Org XInput driver, version 18.0
[ 22.650] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 22.650] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 22.650] (**) Option "Device" "/dev/input/event13"
[ 22.652] (II) synaptics: AlpsPS/2 ALPS GlidePoint: ignoring touch events for semi-multitouch device
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 2000
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 1400
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 22.652] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle double triple
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 22.652] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 22.652] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 22.656] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 22.656] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[ 22.656] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 22.656] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 22.656] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.082
[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 22.656] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 22.656] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 22.656] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 22.658] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event10)
[ 22.658] (II) No input driver specified, ignoring this device.
[ 22.659] (II) This device may have been added with another device file.
[ 22.659] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 22.659] (II) No input driver specified, ignoring this device.
[ 22.659] (II) This device may have been added with another device file.
[ 22.659] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event9)
[ 22.659] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 22.659] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 22.659] (**) Acer WMI hotkeys: always reports core events
[ 22.659] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event9"
[ 22.659] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 22.659] (--) evdev: Acer WMI hotkeys: Found keys
[ 22.659] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 22.659] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 22.659] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 22.659] (**) Option "xkb_rules" "evdev"
[ 22.659] (**) Option "xkb_model" "pc105"
[ 22.659] (**) Option "xkb_layout" "fr"
[ 22.659] (**) Option "xkb_variant" "latin9"
[ 22.996] (II) evdev: Acer WMI hotkeys: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) UnloadModule: "synaptics"
[ 22.996] (II) evdev: PS/2 Mouse: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) evdev: AT Translated Set 2 keyboard: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) evdev: 1.3M WebCam: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) evdev: Logitech Logitech USB Optical Mouse: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) evdev: Sleep Button: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) evdev: Video Bus: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 22.996] (II) evdev: Power Button: Close
[ 22.996] (II) UnloadModule: "evdev"
[ 23.007] Server terminated successfully (0). Closing log file.

voilà !

[doubleneck]

Re !

J'ai trouvé ceci au démarrage une boite de dialogue qui me propose :

• Review the xserver log file
• Review the startup errors
• Edit configuration file

En choisissant la deuxième solution (la n°1 me propose le fichier cité dans ma réponse précédente et la n°3 un écran noir avec un tiret qui ne clignote même pas !)

donc la deuxième solution une image :

or, le fichier est verrouillé !?

comment le supprimer ? et faut il le supprimer ?

Merci !

[dudul88]

Pour le supprimé tu peux faire "Ctrl-Alt-F2" et taper ton id et ton mot de passe. Ensuite tu fais "sudo rm le_nom_du_fichier" et c'est tout. Par contre je ne voit rien sur ta capture c'est tout flou.

On peut avoir le contenu de /etc/lightdm/lightdm.conf ? ("gedit /etc/lightdm/lightdm.conf")

[doubleneck]

[seatDefaults]

user-session=ubuntu

greeter-session=unity-greeter greeter-setup-script=/usr/bin/numlockx on

autologin-user=

voilà pour le résultat ! ça semble léger !?

pour ce qui est sur ma capture, je vais le mettre au propre :

fatal server error:

Server is already active for display 0

if the server is no longer running, remove /temp/.X0.lock

and start again.

c'est donc le fichier .X0.lock que je n'arrive pas à supprimer !

[dudul88]

Dans un terminal fait :

sudo rm /etc/lightdm/lightdm.conf

Et dit nous si ça change quelque-chose.

[doubleneck]

Re !

Pas eu le temps de passer entre temps...

Bon, comme j'avais besoin d'une machine qui soit clean "assez rapidement", j'ai procedé comme je le faisait avec windows ; j'ai réinstallé la 13.04 (l'installation était assez récente, donc peu de perte) !

Merci quand même pour le coup de main et les indications.

[seboss666]

C'est malin, on voulait une soluce de barbus nous :(

Va encore falloir quelques exorcismes pour supprimer le réflexe windowsien