Scorpio Posté(e) le 4 septembre 2011 Partager Posté(e) le 4 septembre 2011 Bien le bonsoir Je viens vers vous pour plus de précision d'un petit souci Voila je viens d'installer une Mandriva 2010.2 et je souhaiterais activé mon wifi via les touches Fn+F3 sur mon Emachine eM350. la loupiote devrais s'allumer afin d'indiquer que celui-ci est actif mais rien n'y fais J'aimerais savoir comment faire. Merci d'avance. Lien vers le commentaire Partager sur d’autres sites More sharing options...
seboss666 Posté(e) le 4 septembre 2011 Partager Posté(e) le 4 septembre 2011 Avant même de vouloir utiliser les touches de raccourci : que donne un lspci en terminal, ainsi qu'un lsmod ? Il se pourrait que la carte wifi ne soit pas correctement initialisée (du style, il manque un module, ou juste le firmware). Lien vers le commentaire Partager sur d’autres sites More sharing options...
Scorpio Posté(e) le 5 septembre 2011 Auteur Partager Posté(e) le 5 septembre 2011 Bien le Bonjour Voici les résultats de lspci ci-dessous [scorpio@localhost ~]$ su -Mot de passe : [root@localhost ~]# lspci00:00.0 Host bridge: Intel Corporation Pineview DMI Bridge00:02.0 VGA compatible controller: Intel Corporation Pineview Integrated Graphics Controller00:02.1 Display controller: Intel Corporation Pineview Integrated Graphics Controller00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)00:1f.0 ISA bridge: Intel Corporation Tigerpoint LPC Controller (rev 02)00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 02)00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)02:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) Voici les résultats de lsmod ci-dessous [root@localhost ~]# lsmodModule Size Used byfuse 64544 2 ipt_IFWLOG 2374 2 ipt_psd 47523 1 cls_flow 7909 0 cls_fw 4283 0 cls_u32 6672 0 sch_htb 15349 0 sch_hfsc 14731 0 sch_ingress 2098 0 sch_sfq 5695 0 xt_time 2181 0 xt_connlimit 3524 0 xt_realm 1058 0 iptable_raw 2262 0 xt_comment 1032 18 xt_recent 9771 0 xt_policy 2614 0 ipt_ULOG 10635 0 ipt_REJECT 2381 4 ipt_REDIRECT 1934 0 ipt_NETMAP 1862 0 ipt_MASQUERADE 2560 0 ipt_ECN 1953 0 ipt_ecn 1505 0 ipt_CLUSTERIP 7051 0 ipt_ah 1245 0 ipt_addrtype 2151 2 nf_nat_tftp 985 0 nf_nat_snmp_basic 8711 0 nf_nat_sip 6137 0 nf_nat_pptp 4491 0 nf_nat_proto_gre 2930 1 nf_nat_pptpnf_nat_irc 1849 0 nf_nat_h323 8732 0 nf_nat_ftp 3473 0 nf_nat_amanda 1243 0 ts_kmp 1965 5 nf_conntrack_amanda 2945 1 nf_nat_amandanf_conntrack_sane 5586 0 nf_conntrack_tftp 4812 1 nf_nat_tftpnf_conntrack_sip 19365 1 nf_nat_sipnf_conntrack_proto_sctp 12721 0 nf_conntrack_pptp 11941 1 nf_nat_pptpnf_conntrack_proto_gre 6801 1 nf_conntrack_pptpnf_conntrack_netlink 17642 0 nf_conntrack_netbios_ns 1662 0 nf_conntrack_irc 5432 1 nf_nat_ircnf_conntrack_h323 66702 1 nf_nat_h323nf_conntrack_ftp 12559 1 nf_nat_ftpipt_set 1511 2 ipt_SET 1703 0 ip_set_nethash 8672 0 ip_set_iptreemap 9012 0 ip_set_iptree 5773 2 ip_set_ipporthash 7633 0 ip_set_portmap 3921 0 ip_set_macipmap 3679 0 ip_set_ipmap 3669 0 ip_set_iphash 6886 0 ip_set 15651 18 ipt_set,ipt_SET,ip_set_nethash,ip_set_iptreemap,ip_set_iptree,ip_set_ipporthash,ip_set_portmap,ip_set_macipmap,ip_set_ipmap,ip_set_iphashxt_TPROXY 2246 0 nf_tproxy_core 2456 1 xt_TPROXY,[permanent]xt_tcpmss 1605 0 xt_pkttype 1160 0 xt_physdev 1739 0 xt_owner 1250 0 xt_NFQUEUE 2312 0 xt_NFLOG 1193 0 nfnetlink_log 8952 1 xt_NFLOGxt_multiport 2762 4 xt_MARK 1055 1 xt_mark 1055 0 xt_mac 1116 0 xt_limit 2180 0 xt_length 1320 0 xt_iprange 2278 0 xt_helper 1463 0 xt_hashlimit 9907 0 xt_DSCP 2277 0 xt_dscp 1829 0 xt_dccp 2213 0 xt_conntrack 2774 8 xt_CONNMARK 1473 0 xt_connmark 1345 0 xt_CLASSIFY 1067 0 ipt_LOG 5811 4 xt_tcpudp 2667 11 xt_state 1490 1 iptable_nat 6508 0 nf_nat 22947 12 ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,iptable_natnf_conntrack_ipv4 15249 12 iptable_nat,nf_natnf_defrag_ipv4 1481 2 xt_TPROXY,nf_conntrack_ipv4nf_conntrack 82229 31 xt_connlimit,ipt_MASQUERADE,ipt_CLUSTERIP,nf_nat_tftp,nf_nat_snmp_basic,nf_nat_sip,nf_nat_pptp,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_sane,nf_conntrack_tftp,nf_conntrack_sip,nf_conntrack_proto_sctp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_netlink,nf_conntrack_netbios_ns,nf_conntrack_irc,nf_conntrack_h323,nf_conntrack_ftp,xt_helper,xt_conntrack,xt_CONNMARK,xt_connmark,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4iptable_mangle 3347 1 nfnetlink 4142 2 nf_conntrack_netlink,nfnetlink_logiptable_filter 2823 1 ip_tables 18620 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filterx_tables 22493 48 ipt_IFWLOG,ipt_psd,xt_time,xt_connlimit,xt_realm,xt_comment,xt_recent,xt_policy,ipt_ULOG,ipt_REJECT,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,ipt_ECN,ipt_ecn,ipt_CLUSTERIP,ipt_ah,ipt_addrtype,ipt_set,ipt_SET,xt_TPROXY,xt_tcpmss,xt_pkttype,xt_physdev,xt_owner,xt_NFQUEUE,xt_NFLOG,xt_multiport,xt_MARK,xt_mark,xt_mac,xt_limit,xt_length,xt_iprange,xt_helper,xt_hashlimit,xt_DSCP,xt_dscp,xt_dccp,xt_conntrack,xt_CONNMARK,xt_connmark,xt_CLASSIFY,ipt_LOG,xt_tcpudp,xt_state,iptable_nat,ip_tablesipv6 317757 26 snd_hda_codec_realtek 301964 1 snd_hda_intel 25542 2 snd_hda_codec 91339 2 snd_hda_codec_realtek,snd_hda_intelsnd_hwdep 7102 1 snd_hda_codecsnd_seq_dummy 1814 0 snd_seq_oss 34705 0 snd_seq_midi_event 7267 1 snd_seq_osssnd_seq 61273 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_eventsnd_seq_device 7144 3 snd_seq_dummy,snd_seq_oss,snd_seqsnd_pcm_oss 47389 0 snd_pcm 93590 3 snd_hda_intel,snd_hda_codec,snd_pcm_osssnd_timer 23556 2 snd_seq,snd_pcmsnd_mixer_oss 16702 1 snd_pcm_osssg 30665 0 snd 73587 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_osssoundcore 7995 1 sndsnd_page_alloc 8660 2 snd_hda_intel,snd_pcmatl1c 35214 0 i2c_i801 11155 0 i915 314068 2 drm_kms_helper 30109 1 i915drm 198265 3 i915,drm_kms_helperi2c_algo_bit 5728 1 i915binfmt_misc 7630 1 cpufreq_ondemand 9930 2 cpufreq_conservative 11598 0 cpufreq_powersave 1066 0 dm_mod 74110 0 acpi_cpufreq 7157 1 freq_table 4047 2 cpufreq_ondemand,acpi_cpufreqnvram 7416 0 usbhid 49577 0 hid 81757 1 usbhiduvcvideo 62945 0 videodev 42150 1 uvcvideov4l1_compat 15527 2 uvcvideo,videodevv4l2_compat_ioctl32 11946 1 videodevi2c_core 29717 6 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit,videodevfan 4079 0 ehci_hcd 52480 0 video 20901 1 i915uhci_hcd 26191 0 joydev 10751 0 battery 10584 0 ac 3482 0 wmi 7805 0 output 2471 1 videousbcore 210196 5 usbhid,uvcvideo,ehci_hcd,uhci_hcdevdev 9738 16 button 6001 1 i915processor 34659 3 acpi_cpufreqthermal 13803 0 ata_piix 22652 0 ahci 38014 3 libata 193241 2 ata_piix,ahcisd_mod 36806 4 scsi_mod 175490 3 sg,libata,sd_modcrc_t10dif 1539 1 sd_modext4 350166 2 jbd2 83309 1 ext4crc16 1683 1 ext4[root@localhost ~]# Merci d'avance pour votre aide Cordialement Lien vers le commentaire Partager sur d’autres sites More sharing options...
seboss666 Posté(e) le 5 septembre 2011 Partager Posté(e) le 5 septembre 2011 C'était attendu : aucun module lié à Broadcom (la marque du chip wifi), donc pas de /dev/ethX de créé, donc pas de wifi (et donc pas de raccourci clavier utilisable). Et il semblerait que la solution ne soit pas la panacée. Plusieurs pistes : -http://forum.pcastuces.com/mandriva_20102_config_wifi_carte_broadcom4727-f8s12941.htm : Apparemment activer les backports et installer le paquet peut résoudre le problème (moyennant un reboot, que le noyau crée le ethX); -http://www.broadcom.com/support/802.11/linux_sta.php : le pilote directement proposé par Broadcom, à compiler soi-même (apparemment de manière tout à fait standard). Mas la liste des cartes compatibles est plutôt restreinte, ça ne fonctionnera donc peut-être pas. Accessoirement et en l'état, que renvoie un dmesg ? (la partie concernant la détection de la puce Broadcom sera intéressante). Lien vers le commentaire Partager sur d’autres sites More sharing options...
Scorpio Posté(e) le 6 septembre 2011 Auteur Partager Posté(e) le 6 septembre 2011 Bien le bonsoir Accessoirement et en l'état, que renvoie un dmesg ? (la partie concernant la détection de la puce Broadcom sera intéressante). voici se que me renvoie la commande dmesg. La commande a étais fais avant d'entreprendre les liens que tu ma donner Puis je tous de même faire la manipe du premier lien ..???? Résultats de dmesg. [scorpio@localhost ~]$ su -Mot de passe : [root@localhost ~]# dmesgLinux version 2.6.33.7-desktop-2mnb (qateam@titan.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Sep 20 18:19:20 UTC 2010Command line: BOOT_IMAGE=linux root=UUID=9c642f48-7415-41a4-b421-e826760b4830 resume=UUID=c1413170-3f8e-4950-a7bc-e24b5e51b8d9 splash=silent vga=788BIOS-provided physical RAM map:BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)BIOS-e820: 0000000000100000 - 000000003f494000 (usable)BIOS-e820: 000000003f494000 - 000000003f4bf000 (reserved)BIOS-e820: 000000003f4bf000 - 000000003f579000 (usable)BIOS-e820: 000000003f579000 - 000000003f5bf000 (ACPI NVS)BIOS-e820: 000000003f5bf000 - 000000003f5ec000 (usable)BIOS-e820: 000000003f5ec000 - 000000003f5ff000 (ACPI data)BIOS-e820: 000000003f5ff000 - 000000003f600000 (usable)BIOS-e820: 000000003f600000 - 0000000040000000 (reserved)BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)NX (Execute Disable) protection: activeDMI 2.6 present.No AGP bridge foundlast_pfn = 0x3f600 max_arch_pfn = 0x400000000MTRR default type: uncachableMTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-through E0000-FFFFF write-protectMTRR variable ranges enabled: 0 base 0FFF00000 mask 0FFF00000 write-protect 1 base 000000000 mask 0E0000000 write-back 2 base 020000000 mask 0E0000000 write-back 3 base 03F800000 mask 0FF800000 uncachable 4 disabled 5 disabled 6 disabledx86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106initial memory mapped : 0 - 20000000init_memory_mapping: 0000000000000000-000000003f6000000000000000 - 003f600000 page 2Mkernel direct mapping tables up to 3f600000 @ 8000-a000RAMDISK: 37a6c000 - 37fefbffACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)ACPI: XSDT 000000003f5fe120 00064 (v01 ACRSYS ACRPRDCT 00000001 01000013)ACPI: FACP 000000003f5fd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: DSDT 000000003f5f1000 08D35 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: FACS 000000003f586000 00040ACPI: HPET 000000003f5fc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: APIC 000000003f5fb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: MCFG 000000003f5fa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: SLIC 000000003f5f0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: BOOT 000000003f5ef000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)ACPI: SSDT 000000003f5ed000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117)ACPI: WDAT 000000003f5ec000 00194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)ACPI: Local APIC address 0xfee00000No NUMA configuration foundFaking a node at 0000000000000000-000000003f600000Bootmem setup node 0 0000000000000000-000000003f600000 NODE_DATA [0000000000007000 - 000000000000bfff] bootmap [000000000000c000 - 0000000000013ebf] pages 8(7 early reservations) ==> bootmem [0000000000 - 003f600000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001933ff8] TEXT DATA BSS ==> [0001000000 - 0001933ff8] #2 [0037a6c000 - 0037fefbff] RAMDISK ==> [0037a6c000 - 0037fefbff] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0001934000 - 00019342ff] BRK ==> [0001934000 - 00019342ff] #5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000][ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000Movable zone start PFN for each nodeearly_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003f494 0: 0x0003f4bf -> 0x0003f579 0: 0x0003f5bf -> 0x0003f5ec 0: 0x0003f5ff -> 0x0003f600On node 0 totalpages: 259355 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3840 pages, LIFO batch:0 DMA32 zone: 3493 pages used for memmap DMA32 zone: 251863 pages, LIFO batch:31ACPI: PM-Timer IO Port: 0x408ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Using ACPI (MADT) for SMP configuration informationACPI: HPET id: 0x8086a201 base: 0xfed00000SMP: Allowing 4 CPUs, 2 hotplug CPUsnr_irqs_gsi: 24PM: Registered nosave memory: 000000000009f000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000PM: Registered nosave memory: 00000000000e0000 - 0000000000100000PM: Registered nosave memory: 000000003f494000 - 000000003f4bf000PM: Registered nosave memory: 000000003f579000 - 000000003f5bf000PM: Registered nosave memory: 000000003f5ec000 - 000000003f5ff000Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)Booting paravirtualized kernel on bare hardwaresetup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1PERCPU: Embedded 30 pages/cpu @ffff880001a00000 s90392 r8192 d24296 u524288pcpu-alloc: s90392 r8192 d24296 u524288 alloc=1*2097152pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 255703Policy zone: DMA32Kernel command line: BOOT_IMAGE=linux root=UUID=9c642f48-7415-41a4-b421-e826760b4830 resume=UUID=c1413170-3f8e-4950-a7bc-e24b5e51b8d9 splash=silent vga=788PID hash table entries: 4096 (order: 3, 32768 bytes)Checking aperture...No AGP bridge foundCalgary: detecting Calgary via BIOS EBDA areaCalgary: Unable to locate Rio Grande table in EBDA - bailing!Memory: 1007220k/1038336k available (3848k kernel code, 916k absent, 30200k reserved, 3395k data, 688k init)SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1Hierarchical RCU implementation.NR_IRQS:2304Console: colour dummy device 80x25console [tty0] enabledhpet clockevent registeredFast TSC calibration using PITDetected 1662.576 MHz processor.Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.15 BogoMIPS (lpj=1662576)Security Framework initializedTOMOYO Linux initializedDentry cache hash table entries: 131072 (order: 8, 1048576 bytes)Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)Mount-cache hash table entries: 256CPU: Physical Processor ID: 0CPU: Processor Core ID: 0mce: CPU supports 5 MCE banksCPU0: Thermal monitoring handled by SMIusing mwait in idle threads.Performance Events: Atom events, Intel PMU driver.... version: 3... bit width: 40... generic registers: 2... value mask: 000000ffffffffff... max period: 000000007fffffff... fixed-purpose events: 3... event mask: 0000000700000003ACPI: Checking initramfs for custom DSDTACPI: Core revision 20091214ftrace: converting mcount calls to 0f 1f 44 00 00ftrace: allocating 15739 entries in 62 pagesSetting APIC routing to flat..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: Intel® Atom CPU N450 @ 1.66GHz stepping 0aBooting Node 0, Processors #1CPU1: Thermal monitoring handled by SMIBrought up 2 CPUsTotal of 2 processors activated (6650.31 BogoMIPS).devtmpfs: initializedTime: 17:23:18 Date: 09/06/11NET: Registered protocol family 16ACPI: bus type pci registeredPCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820PCI: Using configuration type 1 for base accessbio: create slab <bio-0> at 0ACPI: EC: Look up EC in DSDTACPI: Executed 1 blocks of module-level executable AML codeACPI: BIOS _OSI(Linux) query ignoredACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62ACPI: Power Resource [FN00] (on)ACPI: No dock devices found.ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20091214/nspredef-351)\_SB_.PCI0:_OSC evaluation returned wrong type_OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (0000:00)pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use thempci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)pci 0000:00:02.0: reg 10: [mem 0x54180000-0x541fffff]pci 0000:00:02.0: reg 14: [io 0x40c0-0x40c7]pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]pci 0000:00:02.0: reg 1c: [mem 0x54000000-0x540fffff]pci 0000:00:02.1: reg 10: [mem 0x54100000-0x5417ffff]pci 0000:00:1b.0: reg 10: [mem 0x54200000-0x54203fff 64bit]pci 0000:00:1b.0: PME# supported from D0 D3hot D3coldpci 0000:00:1b.0: PME# disabledpci 0000:00:1c.0: PME# supported from D0 D3hot D3coldpci 0000:00:1c.0: PME# disabledpci 0000:00:1c.1: PME# supported from D0 D3hot D3coldpci 0000:00:1c.1: PME# disabledpci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]pci 0000:00:1d.3: reg 20: [io 0x4020-0x403f]pci 0000:00:1d.7: reg 10: [mem 0x54204400-0x542047ff]pci 0000:00:1d.7: PME# supported from D0 D3hot D3coldpci 0000:00:1d.7: PME# disabledpci 0000:00:1f.2: reg 10: [io 0x40b8-0x40bf]pci 0000:00:1f.2: reg 14: [io 0x40cc-0x40cf]pci 0000:00:1f.2: reg 18: [io 0x40b0-0x40b7]pci 0000:00:1f.2: reg 1c: [io 0x40c8-0x40cb]pci 0000:00:1f.2: reg 20: [io 0x40a0-0x40af]pci 0000:00:1f.2: reg 24: [mem 0x54204000-0x542043ff]pci 0000:00:1f.2: PME# supported from D3hotpci 0000:00:1f.2: PME# disabledpci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]pci 0000:01:00.0: reg 10: [mem 0x53000000-0x5303ffff 64bit]pci 0000:01:00.0: reg 18: [io 0x3000-0x307f]pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3coldpci 0000:01:00.0: PME# disabledpci 0000:00:1c.0: PCI bridge to [bus 01-01]pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]pci 0000:00:1c.0: bridge window [mem 0x53000000-0x53ffffff]pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]pci 0000:02:00.0: reg 10: [mem 0x52000000-0x52003fff 64bit]pci 0000:02:00.0: supports D1 D2pci 0000:02:00.0: PME# supported from D0 D3hot D3coldpci 0000:02:00.0: PME# disabledpci 0000:00:1c.1: PCI bridge to [bus 02-02]pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]pci 0000:00:1c.1: bridge window [mem 0x52000000-0x52ffffff]pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20091214/nspredef-351)\_SB_.PCI0:_OSC evaluation returned wrong type_OSC request data:1 1f 1f ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=nonevgaarb: loadedPCI: Using ACPI for IRQ routingPCI: pci_cache_line_size set to 64 bytesNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaultHPET: 3 timers in total, 0 timers will be used for per-cpu timerhpet0: at MMIO 0xfed00000, IRQs 2, 8, 0hpet0: 3 comparators, 64-bit 14.318180 MHz counterSwitching to clocksource tscpnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 9 devicesACPI: ACPI bus type pnp unregisteredsystem 00:01: [io 0x164e-0x164f] has been reservedsystem 00:01: [io 0x0600-0x060f] has been reservedsystem 00:01: [io 0x0610] has been reservedsystem 00:01: [io 0x0800-0x080f] has been reservedsystem 00:01: [io 0x0810-0x0817] has been reservedsystem 00:01: [io 0x0400-0x047f] has been reservedsystem 00:01: [io 0x0500-0x053f] has been reservedsystem 00:01: [io 0xff2c-0xff2f] has been reservedsystem 00:01: [mem 0xe0000000-0xefffffff] has been reservedsystem 00:01: [mem 0xfed1c000-0xfed1ffff] has been reservedsystem 00:01: [mem 0xfed14000-0xfed17fff] has been reservedsystem 00:01: [mem 0xfed18000-0xfed18fff] has been reservedsystem 00:01: [mem 0xfed19000-0xfed19fff] has been reservedsystem 00:01: [mem 0xfec00000-0xfec00fff] could not be reservedsystem 00:01: [mem 0xfee00000-0xfee00fff] has been reservedpci 0000:00:1c.0: PCI bridge to [bus 01-01]pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]pci 0000:00:1c.0: bridge window [mem 0x53000000-0x53ffffff]pci 0000:00:1c.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]pci 0000:00:1c.1: PCI bridge to [bus 02-02]pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]pci 0000:00:1c.1: bridge window [mem 0x52000000-0x52ffffff]pci 0000:00:1c.1: bridge window [mem 0x51000000-0x51ffffff 64bit pref]pci 0000:00:1e.0: PCI bridge to [bus 03-03]pci 0000:00:1e.0: bridge window [io disabled]pci 0000:00:1e.0: bridge window [mem disabled]pci 0000:00:1e.0: bridge window [mem pref disabled]pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16pci 0000:00:1c.0: setting latency timer to 64pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17pci 0000:00:1c.1: setting latency timer to 64pci 0000:00:1e.0: setting latency timer to 64pci_bus 0000:00: resource 0 [io 0x0000-0xffff]pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]pci_bus 0000:01: resource 1 [mem 0x53000000-0x53ffffff]pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]pci_bus 0000:02: resource 1 [mem 0x52000000-0x52ffffff]pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]pci_bus 0000:03: resource 3 [io 0x0000-0xffff]pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffffffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 6, 262144 bytes)TCP established hash table entries: 131072 (order: 9, 2097152 bytes)TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredUDP hash table entries: 512 (order: 2, 16384 bytes)UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)NET: Registered protocol family 1pci 0000:00:02.0: Boot video devicePCI: CLS 64 bytes, default 64Trying to unpack rootfs image as initramfs...Freeing initrd memory: 5646k freedSimple Boot Flag at 0x44 set to 0x1audit: initializing netlink socket (disabled)type=2000 audit(1315329798.847:1): initializedHugeTLB registered 2 MB page size, pre-allocated 0 pagesVFS: Disk quotas dquot_6.5.2Dquot-cache hash table entries: 512 (order 0, 4096 bytes)msgmni has been set to 1978alg: No test for stdrng (krng)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler deadline registeredio scheduler cfq registered (default)pcieport 0000:00:1c.0: setting latency timer to 64pcieport 0000:00:1c.0: irq 24 for MSI/MSI-Xpcieport 0000:00:1c.1: setting latency timer to 64pcieport 0000:00:1c.1: irq 25 for MSI/MSI-Xvesafb: framebuffer at 0x40000000, mapped to 0xffffc90010580000, using 1875k, total 8128kvesafb: mode is 800x600x16, linelength=1600, pages=7vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 100x37fb0: VESA VGA frame buffer deviceLinux agpgart interface v0.103agpgart-intel 0000:00:00.0: Intel Pineview Chipsetagpgart-intel 0000:00:00.0: detected 8188K stolen memoryagpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000Serial: 8250/16550 driver, 4 ports, IRQ sharing enabledbrd: module loadedinput: Macintosh mouse button emulation as /devices/virtual/input/input0PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micertc_cmos 00:03: RTC can wake from S4rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month, 242 bytes nvram, hpet irqscpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredPM: Checking image partition UUID=c1413170-3f8e-4950-a7bc-e24b5e51b8d9input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1PM: Resume from disk failed.registered taskstats version 1 Magic number: 11:95:390rtc_cmos 00:03: setting system clock to 2011-09-06 17:23:19 UTC (1315329799)BIOS EDD facility v0.16 2004-Jun-25, 1 devices foundFreeing unused kernel memory: 688k freedSynaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2SCSI subsystem initializedlibata version 3.00 loaded.ahci 0000:00:1f.2: version 3.0ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17ahci 0000:00:1f.2: irq 26 for MSI/MSI-Xahci: SSS flag set, parallel bus scan disabledahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA modeahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64scsi0 : ahciscsi1 : ahciscsi2 : ahciscsi3 : ahciata1: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204100 irq 26ata2: SATA max UDMA/133 abar m1024@0x54204000 port 0x54204180 irq 26ata3: DUMMYata4: DUMMYata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)ata1.00: unexpected _GTF length (4)ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC60F, max UDMA/133ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AAata1.00: unexpected _GTF length (4)ata1.00: configured for UDMA/133scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 PBBO PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAsda: sda1 sda2 < sda5 sda6 sda7 >sd 0:0:0:0: [sda] Attached SCSI diskata2: SATA link down (SStatus 0 SControl 300)PM: Marking nosave pages: 000000000009f000 - 0000000000100000PM: Marking nosave pages: 000000003f494000 - 000000003f4bf000PM: Marking nosave pages: 000000003f579000 - 000000003f5bf000PM: Marking nosave pages: 000000003f5ec000 - 000000003f5ff000PM: Basic memory bitmaps createdPM: Basic memory bitmaps freedEXT4-fs (sda1): mounted filesystem with ordered data modeTomoyo security MAC extension available but disabled by default. If you want toenable and use it, ccs-tools package must be installed.udev: starting version 153ACPI: SSDT 000000003f4b7c90 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)ACPI: SSDT 000000003f4b6e10 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)Marking TSC unstable due to TSC halts in idleinput: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3ACPI: Power Button [PWRB]input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4ACPI: Sleep Button [sLPB]input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5ACPI: Lid Switch [LID0]ACPI: SSDT 000000003f4b7f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)ACPI: SSDT 000000003f4b5f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6ACPI: Power Button [PWRF]Switching to clocksource hpetACPI: WMI: Mapper loadedthermal LNXTHERM:01: registered as thermal_zone0ACPI: Thermal Zone [THRM] (32 C)usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbACPI: AC Adapter [AC] (on-line)ACPI: Fan [FAN] (on)uhci_hcd: USB Universal Host Controller Interface driveruhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16uhci_hcd 0000:00:1d.0: setting latency timer to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004080usb usb1: New USB device found, idVendor=1d6b, idProduct=0001usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: UHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcdusb usb1: SerialNumber: 0000:00:1d.0hub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detecteduhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17uhci_hcd 0000:00:1d.1: setting latency timer to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004060usb usb2: New USB device found, idVendor=1d6b, idProduct=0001usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: UHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcdusb usb2: SerialNumber: 0000:00:1d.1hub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detecteduhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18uhci_hcd 0000:00:1d.2: setting latency timer to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040usb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: UHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcdusb usb3: SerialNumber: 0000:00:1d.2hub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detecteduhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19uhci_hcd 0000:00:1d.3: setting latency timer to 64uhci_hcd 0000:00:1d.3: UHCI Host Controlleruhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004020usb usb4: New USB device found, idVendor=1d6b, idProduct=0001usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb4: Product: UHCI Host Controllerusb usb4: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcdusb usb4: SerialNumber: 0000:00:1d.3hub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedusb 1-2: new low speed USB device using uhci_hcd and address 2usb 1-2: New USB device found, idVendor=046d, idProduct=c00cusb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 1-2: Product: USB Optical Mouseusb 1-2: Manufacturer: LogitechACPI: Battery Slot [bAT0] (battery present)ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) DriverWarning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not afterehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16ehci_hcd 0000:00:1d.7: setting latency timer to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5ehci_hcd 0000:00:1d.7: using broken periodic workaroundehci_hcd 0000:00:1d.7: debug port 1ehci_hcd 0000:00:1d.7: cache line size of 64 is not supportedehci_hcd 0000:00:1d.7: irq 16, io mem 0x54204400ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00usb usb5: New USB device found, idVendor=1d6b, idProduct=0002usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb5: Product: EHCI Host Controllerusb usb5: Manufacturer: Linux 2.6.33.7-desktop-2mnb ehci_hcdusb usb5: SerialNumber: 0000:00:1d.7hub 5-0:1.0: USB hub foundhub 5-0:1.0: 8 ports detectedusb 1-2: USB disconnect, address 2usbcore: registered new interface driver hiddevusbcore: registered new interface driver usbhidusbhid: USB HID core driverNon-volatile memory driver v1.3usb 5-1: new high speed USB device using ehci_hcd and address 2device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.comusb 5-1: New USB device found, idVendor=0471, idProduct=0854usb 5-1: New USB device strings: Mfr=86, Product=76, SerialNumber=63usb 5-1: Product: SPD3400CCusb 5-1: Manufacturer: PHILIPSusb 5-1: SerialNumber: DEF10DF9F6F3Initializing USB Mass Storage driver...scsi4 : usb-storage 5-1:1.0usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.usb 5-4: new high speed USB device using ehci_hcd and address 4usb 5-4: New USB device found, idVendor=0402, idProduct=7675usb 5-4: New USB device strings: Mfr=3, Product=1, SerialNumber=0usb 5-4: Product: WebCamusb 5-4: Manufacturer: Y2A610344Linux video capture interface: v2.00uvcvideo: Found UVC 1.00 device WebCam (0402:7675)input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0/input/input7usbcore: registered new interface driver uvcvideoUSB Video Class driver (v0.1.0)usb 1-2: new low speed USB device using uhci_hcd and address 3usb 1-2: New USB device found, idVendor=046d, idProduct=c00cusb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0usb 1-2: Product: USB Optical Mouseusb 1-2: Manufacturer: Logitechinput: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input8generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0scsi 4:0:0:0: CD-ROM PHILIPS SPD3400CC JP03 PQ: 0 ANSI: 0sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 4:0:0:0: Attached scsi CD-ROM sr0sd 0:0:0:0: Attached scsi generic sg0 type 0sr 4:0:0:0: Attached scsi generic sg1 type 5EXT4-fs (sda6): mounted filesystem with ordered data modeAdding 4088500k swap on /dev/sda5. Priority:-1 extents:1 across:4088500k [drm] Initialized drm 1.1.0 20060810i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16i915 0000:00:02.0: setting latency timer to 64i915 0000:00:02.0: irq 27 for MSI/MSI-X[drm] set up 7M of stolen space[drm] initialized overlay supportfb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driverConsole: switching to colour dummy device 80x25Console: switching to colour frame buffer device 128x37fb0: inteldrmfb frame buffer deviceregistered panic notifieracpi device:24: registered as cooling_device3input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0[drm] Big FIFO is enabled[drm] Big FIFO is enabled[drm] Big FIFO is enabled[drm] Big FIFO is disabled[drm] Big FIFO is disabled[drm] Big FIFO is disabledi801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16atl1c 0000:01:00.0: setting latency timer to 64atl1c 0000:01:00.0: version 1.0.0.2-NAPI[drm] Big FIFO is disabled[drm] Big FIFO is disabled[drm] Big FIFO is disabled[drm] Big FIFO is disabledHDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-XHDA Intel 0000:00:1b.0: setting latency timer to 64[drm] Big FIFO is disabled[drm] Big FIFO is disabledhda_codec: ALC272: BIOS auto-probing.autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) hp_outs=1 (0x21/0x0/0x0/0x0/0x0) mono: mono_out=0x0 inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1drealtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272usb 5-1: USB disconnect, address 2usb 5-1: new high speed USB device using ehci_hcd and address 5usb 5-1: New USB device found, idVendor=0471, idProduct=0854usb 5-1: New USB device strings: Mfr=86, Product=76, SerialNumber=63usb 5-1: Product: SPD3400CCusb 5-1: Manufacturer: PHILIPSusb 5-1: SerialNumber: DEF10DF9F6F3scsi5 : usb-storage 5-1:1.0NET: Registered protocol family 10lo: Disabled Privacy Extensionsatl1c 0000:01:00.0: irq 29 for MSI/MSI-XADDRCONF(NETDEV_UP): eth0: link is not readyscsi 5:0:0:0: CD-ROM PHILIPS SPD3400CC JP03 PQ: 0 ANSI: 0sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda traysr 5:0:0:0: Attached scsi CD-ROM sr0sr 5:0:0:0: Attached scsi generic sg1 type 5ip_tables: © 2000-2006 Netfilter Core TeamNetfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (7918 buckets, 31672 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please usenf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option orsysctl net.netfilter.nf_conntrack_acct=1 to enable it.NF_TPROXY: Transparent proxy support initialized, version 4.1.0NF_TPROXY: Copyright © 2006-2007 BalaBit IT Ltd.ip_set version 4 loadedctnetlink v0.93: registering with nfnetlink.ClusterIP Version 0.8 loaded successfullyxt_time: kernel timezone is +0200u32 classifier Actions configured netfilter PSD loaded - © astaro AGIFWLOG: register targetCPUFREQ: Per core ondemand sysfs interface is deprecated - up_thresholdfuse init (API version 7.13)[root@localhost ~]# Lien vers le commentaire Partager sur d’autres sites More sharing options...
seboss666 Posté(e) le 6 septembre 2011 Partager Posté(e) le 6 septembre 2011 Eh bien, comme j'ai dit, pour le premier lien, il faut qu'au moins une des connexions soit active, donc la câblée. Et manifestement, lors du dmesg, ce n'était pas le cas (ADDRCONF(NETDEV_UP): eth0: link is not ready). Une fois que tu es connecté, tu peux lancer la procédure. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Scorpio Posté(e) le 8 septembre 2011 Auteur Partager Posté(e) le 8 septembre 2011 Bien le bonjour Donc merci encore pour tous ses tuyaux se qui ma permit de faire fonctionné mon wifi Cordialement Lien vers le commentaire Partager sur d’autres sites More sharing options...
seboss666 Posté(e) le 8 septembre 2011 Partager Posté(e) le 8 septembre 2011 Encore une victoire de Canard Morpheus Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Archivé
Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.