Jump to content

HTT pour CM Asus K8N4-E


Recommended Posts

Je pensais que le chipset Nf4 offrait un HTT de 1000 MHz, mais quand je regarde dans mon BIOS, je n'ai un coef multiplicateur que de 4, ce qui fait 4x200 = 800, et non 1000.

Quelqu'un peut-il me confirmer ??? Je trouve pas l'info sur le site de Asus...

Bye.

Link to comment
Share on other sites

Je pensais que le chipset Nf4 offrait un HTT de 1000 MHz, mais quand je regarde dans mon BIOS, je n'ai un coef multiplicateur que de 4, ce qui fait 4x200 = 800, et non 1000.

Quelqu'un peut-il me confirmer ??? Je trouve pas l'info sur le site de Asus...

Bye.

La K8N4-E c'est pas du NF4-4X soit limité 800MHz :chinois:

Link to comment
Share on other sites

Je pensais que le chipset Nf4 offrait un HTT de 1000 MHz, mais quand je regarde dans mon BIOS, je n'ai un coef multiplicateur que de 4, ce qui fait 4x200 = 800, et non 1000.

Quelqu'un peut-il me confirmer ??? Je trouve pas l'info sur le site de Asus...

Bye.

1 GHZ, je confirme :

http://www.nvidia.com/page/pg_20041014863476.html

HyperTransport technology

16 x 16 link running at 1GHz for extremely high throughput (8.0GB/sec)

Link to comment
Share on other sites

explication là :

http://www.gamepc.com/labs/view_content.as...cookie%5Ftest=1

Tu as donc la vieille version du nforce 4 :oops:

After scouring through Gigabyte's manuals and using the board for over a week now, the only difference we can find between a standard nForce4 and the nForce4-4x is the intended HyperTransport link speed. There were rumors floating around when the nForce4 was first being developed in that it could not run at full (5x / 1000 MHz) HyperTransport link speeds, but instead could only run at 4x / 800 MHz speeds. Our estimations were all but confirmed in the manual, where as the peak HyperTransport link speed is listed at 800 MHz, with no mention of 1000 MHz speeds.

Link to comment
Share on other sites

explication là :

http://www.gamepc.com/labs/view_content.as...cookie%5Ftest=1

Tu as donc la vieille version du nforce 4 :transpi:

After scouring through Gigabyte's manuals and using the board for over a week now, the only difference we can find between a standard nForce4 and the nForce4-4x is the intended HyperTransport link speed. There were rumors floating around when the nForce4 was first being developed in that it could not run at full (5x / 1000 MHz) HyperTransport link speeds, but instead could only run at 4x / 800 MHz speeds. Our estimations were all but confirmed in the manual, where as the peak HyperTransport link speed is listed at 800 MHz, with no mention of 1000 MHz speeds.

Bah oui c'est ce que je disais :oops:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...