Aller au contenu
View in the app

A better way to browse. Learn more.

Next

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

recherche manuel carte mere

Featured Replies

Posté(e)

Tu l'aura avec le pc mais ne t'attend pas a du manuel super detaillé comme une CM acheté a part..... Tu aura le bouton marche/arret et c'est tout

Posté(e)
  • Auteur

merci pour les liens j'ai dl les fichiers pdf c'est bien cette carte mere mais c'est etrange mon processeur n'eSt pas compatible il indique un fsb a 400mhz

English

- 5 -

Chapter 1 Introduction

Form Factor 22.9cm x 24.3cm Micro ATX size form factor, 4 layers PCB.

CPU Socket 478 for Intel® Micro FC-PGA2 Pentium® 4 processor

Support Intel ® Pentium ® 4 (Northwood, 0.13 m) processor

Intel Pentium®4 400MHz FSB

2nd cache depends on CPU

Chipset SiS 650 Host/Memory controller(**)

SiS 650GX Host/Memory controller(***)

SiS 961 MuTIOL Media I/O

Memory 2 184-pin DDR DIMM sockets

Supports DDR266/200 SDRAM

alors que j'ai un p4 2.66 533mhz mais a part ca c'est la meme ???

CPU Support

* Socket mPGA 478B

* Supports Intel P4 FC-PGA2 (Flip-Chip Pin Grid Array), 1400 MHz to 3066 MHz.

* Warning: not all of the above processors have been qualified.

* 100 MHz (x4 = 400 MHz) data bus support (Quad-Bumped technology).

* 133 MHz (x4 = 533 MHz) data bus support (Quad-Bumped technology)

* The SiS 645 DX DDR333 Chipset features:

o Processor Host/Bus support (533MHz data transfer rate).

o Supports DDR333/266 SDRAM.

o AGTL+ and AGTL compliant bus driver auto compensation

o AGP V2.0 Compliant

o Supports Additional AGP4X/2X interface and Fast Write Transaction

* The SiS 962 MuTIOL Media I/O features:

o PCI rev 2.2 specification support

+ supports PCI bus at 33 MHz

+ 3 PCI bus masters slots (1 combo with CNR connector)

+ 133 MB/s maximum throughput

o Integrated IDE controller supporting PIO Mode 4 transfers at up to 14 MB/s, Ultra ATA/33 mode transfers at up to 33 MB/s, and Ultra ATA/66 mode transfers up to 66 MB/s and Ultra ATA/100 mode transfers at up to 100 MB/s and ATA/133 mode transfers up to 133 MB/s.

o 3 USB controllers, supporting wake-up from sleeping states S1-S3, and legacy mouse/keyboard software. Note about the USB features: There is support for 6 USB ports on the motherboard, all of which are active at the same time (thus no need for a USB selection jumper). 4 of the USB ports are on the back panel, and the onboard F_USB2 header can be connected to two USB ports.

o 6 USB USB 2.0

o IEEE 1394a Controller Integrated: Up to three 1394a ports support w/ external 1394a PHY.

o AC'97 link for audio and telephony codecs (AC'97 2.2 interface)

o SMBus interface in post only.

o PC2001 Compliance

une mise a jour de cette carte mere ??? peut etre ??

Posté(e)

alors que j'ai un p4 2.66 533mhz mais a part ca c'est la meme ???

CPU Support

* Socket mPGA 478B

* Supports Intel P4 FC-PGA2 (Flip-Chip Pin Grid Array), 1400 MHz to 3066 MHz.

* Warning: not all of the above processors have been qualified.

* 100 MHz (x4 = 400 MHz) data bus support (Quad-Bumped technology).

* 133 MHz (x4 = 533 MHz) data bus support (Quad-Bumped technology)

apparament elle supporte les 533Mhz...Mais ils disent que ca n'a pas été tésté

Archivé

Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.