Probleme Gravure DVD ?

[David Beckham]

Salut tout le monde , voila je viens juste de prendre un graveur DVD nec ND-2500A jusque la pas de probleme pour graver un cd par contre pour graver un DVD impossible avec alcohol 120% , Nero Burning ou CDRWIN des que je clique graver ou simuler ça commence et puis quelque instant plus tard direct , gravure echouée etc...........;j'aimerais bien savoir pourquoi , j'arrive pas a graver

voici mes txt:

j'ai un message apres la gravure échouée sur alcohol 120%:

une erreur est survenue durant la procedure de gravure!

veuillez consultez le registre et rapporter les erreurs au support technique

################## Detailed Information of Device(s) ##################

///////////////////////////////////////////////////////////////////////

(E JLMS DVD-ROM LTD-166S(3:0) detail information.

///////////////////////////////////////////////////////////////////////

Vendor Identification: JLMS

Product Identification: DVD-ROM LTD-166S

Production Revision Level: DS0B

Location: atapi, Port 3, Bus 0, Target 0, Lun 0

-* Note: This information below is provided by the unit, it might be inaccurate. *-

-* This software does not use this information! *-

Removable media: Yes

Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)

Response Data Format: 01h

CD-R Read/Write: Yes/No

CD-RW Read/Write: Yes/No

Read CD-R Fixed Packet: Yes

Test Write: No

DVD-ROM Read: Yes

DVD-R Read/Write: Yes/No

DVD-RAM Read/Write: Yes/No

Audio Play: Yes

Composite Audio and Video Data Stream: Yes

Digital output (IEC958) on port 1 Supported: Yes

Digital output (IEC958) on port 2 Supported: No

Mode 1 Form 2: Yes

Mode 2 Form 2: Yes

Multi-Session: Yes

BUF: No

CD-DA Commands supported: Yes

CD-DA Stream is Accurate: Yes

R-W Supported: Yes

R-W De-interleaved and Corrected: No

C2 Pointers Support: Yes

ISRC Supported: Yes

UPC Supported: Yes

Read Bar Code: No

Lock media into the drive: Yes

Currently drive Lock state: Unlocked

Prevent Jumper: No

Eject Command: Yes

Separate volume levels: Yes

Separate channel mute: Yes

Changer Supports Disc Present: No

Software slot selection: No

Side change capable: No

P through W in Lead-In: Yes

Maximum Read Speed Supported (with current disc): 48X (7200 Ko/Sec)

Current Read Speed Supported (with current Disc): 48X (7200 Ko/Sec)

///////////////////////////////////////////////////////////////////////

(F _NEC DVD_RW ND-2500A(3:1) detail information.

///////////////////////////////////////////////////////////////////////

Vendor Identification: _NEC

Product Identification: DVD_RW ND-2500A

Production Revision Level: 1.06

Location: atapi, Port 3, Bus 0, Target 1, Lun 0

Support recording method: DAO, RAW SAO, RAW SAO+SUB, RAW DAO(96), DVD DAO

BURN-Free Technology: Not Supported

Auto-Select best write speed: Not Supported

-* Note: This information below is provided by the unit, it might be inaccurate. *-

-* This software does not use this information! *-

Removable media: Yes

Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)

Response Data Format: 02h

CD-R Read/Write: Yes/Yes

CD-RW Read/Write: Yes/Yes

Read CD-R Fixed Packet: Yes

Test Write: Yes

DVD-ROM Read: Yes

DVD-R Read/Write: Yes/Yes

DVD-RAM Read/Write: No/No

Audio Play: Yes

Composite Audio and Video Data Stream: No

Digital output (IEC958) on port 1 Supported: No

Digital output (IEC958) on port 2 Supported: No

Mode 1 Form 2: Yes

Mode 2 Form 2: Yes

Multi-Session: Yes

BUF: Yes

CD-DA Commands supported: Yes

CD-DA Stream is Accurate: Yes

R-W Supported: Yes

R-W De-interleaved and Corrected: No

C2 Pointers Support: Yes

ISRC Supported: Yes

UPC Supported: Yes

Read Bar Code: No

Lock media into the drive: Yes

Currently drive Lock state: Unlocked

Prevent Jumper: No

Eject Command: Yes

Separate volume levels: Yes

Separate channel mute: Yes

Changer Supports Disc Present: No

Software slot selection: No

Side change capable: No

P through W in Lead-In: Yes

Maximum Read Speed Supported (with current disc): 40X (6000 Ko/Sec)

Maximum Write Speed Supported (with current Disc): 32X (4800 Ko/Sec)

Current Read Speed Supported (with current Disc): 40X (6000 Ko/Sec)

Current Write Speed Supported (with current Disc): 32X (4800 Ko/Sec)

#######################################################################

###################### Source Disc/Image Information ######################

Type: Fichier image Nero

Chemin: G:\Incoming\

Nom: Final Fantasy X 2.nrg

Taille: 3887.20 MB

Session : 1

Piste : 1

Session 01:

Piste 01: DVD, Nombre de secteurs: 1990096(3.79 GB), Adresse: 000000

#############################################################################

####################### Dumping/Recording Progress Log #######################

01:53:42 Infos processeur : Intel® Pentium® 4 CPU 2.66GHz (2665MHz)

01:53:42 Mémoire disponible pour Windows :1 047 280 KB

01:53:42 Taille de la mémoire tampon : 128 MB

01:53:42 Lecture du fichier image: G:\Incoming\Final Fantasy X 2.nrg

01:53:42 DVD Source Info : Session: 1, Piste: 1, Nombre de secteurs: 3.79 GB / 442:14:46

01:53:42 (F _NEC DVD_RW ND-2500A(3:1): Méthode d'écriture / Vitesse

01:53:42 Simulation d'écriture - DVD DAO - 4.0X (5520 Ko/Sec)

01:54:20 (F _NEC DVD_RW ND-2500A(3:1) - [Write ERROR] LBA: 0, Length: 16

S:KEY - 03/73/04 - "Program Memory Area/RMA Update Failure"

01:54:20 (F _NEC DVD_RW ND-2500A(3:1): Gravure échouée !

01:54:20 Message d'erreur [03/73/04] - Program Memory Area/RMA Update Failure

01:54:20 (F _NEC DVD_RW ND-2500A(3:1): Simulation d'écriture échouée !

01:54:20 Lecture du fichier image annulée !

01:54:22 Une erreur est survenue durant la procédure de gravure!

Veuillez consulter le registre et rapporter les erreurs au support technique.

##############################################################################

apres quand je clique rapport ou je sais plus trop quoi , c'est marqué ceci:

Calling Mapisendmail() function failed one or more unspecified errors occurred no message was sent

Sur Ahead Nero Burning , voici mon txt:

Greg

Microse Corporation

1A23-3123-4037-4047-5520-3523

Windows XP 5.1

IA32

WinAspi: -

ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 19:18:06

Version de Nero : 6.3.0.3

Graveur : <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 3 TA 1 - 6.3.0.3

Pilote d'adaptateur :<atapi> HA 3

Drive buffer : 2048kB

Bus Type : default (0) -> ATAPI, detected: ATAPI

CD-ROM : <JLMS DVD-ROM LTD-166S>Version: DS0B - HA 3 TA 0 - 6.3.0.3

Pilote d'adaptateur :<atapi> HA 3

=== Scsi-Device-Map ===

DiskPeripheral : ExcelStor Technology J240 atapi Port 0 ID 0 DMA: On

DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On

DiskPeripheral : Maxtor 6Y080M0 atapi Port 2 ID 0 DMA: On

CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 3 ID 0 DMA: On

CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 3 ID 1 DMA: On

CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===

JLMS DVD-ROM LTD-166S E: CDRom0

_NEC DVD_RW ND-2500A F: CDRom1

AXV CD/DVD-ROM K: CDRom2

=======================

AutoRun : 1

Excluded drive IDs:

CmdQueuing : 1

CmdNotification: 2

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

EraseSpeed : 0

BUFE : 0

Physical memory : 1022MB (1047280kB)

Free physical memory: 688MB (705272kB)

Memory in use : 32 %

Uncached PFiles: 0x0

Use Static Write Speed Table: 0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

18.3.2004

Graver une image DVD

01:59:42 #1 Text 0 File Reader.cpp, Line 118

Reader running

01:59:42 #2 Text 0 File Writer.cpp, Line 124

Writer _NEC DVD_RW ND-2500A running

01:59:42 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366

Image was written as DAO.

DAOI:

MediaCatalogNumber = ''

TocType = 0x00

Finalized = 1

First/Last Track = 1 / 1

1: ISRC = ''

Blocksize = 2048

TrackMode = 'TRM_DATA_MODE1'

TrackConfig = 0x00

First/Last Index = 0 / 1

Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -218943488

CUES:

0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)

1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)

2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)

3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=442:14.46 ( 1990096)

MTYP: Mediumtype = DVD (old format) (0x1C)

Image file name: <G:\Incoming\Final Fantasy X 2.nrg>

01:59:42 #4 Text 0 File Burncd.cpp, Line 3101

Turn on Disque entier, using DVD media

01:59:42 #5 Text 0 File DlgWaitCD.cpp, Line 240

Last possible write address on media: 2298495 (510:46.45, 4489MB)

Last address to be written: 1990095 (442:14.45, 3886MB)

01:59:42 #6 Text 0 File DlgWaitCD.cpp, Line 245

Write in overburning mode: FALSE

01:59:42 #7 Text 0 File DlgWaitCD.cpp, Line 2085

Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R

Disc Manufacturer: AN31 -

Disc Application Code: 64, Disc Physical Code: 193

01:59:42 #8 Text 0 File DlgWaitCD.cpp, Line 406

>>> Protocol of DlgWaitCD activities: <<<

=========================================

01:59:42 #9 Text 0 File ThreadedTransferInterface.cpp, Line 779

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 (1 - DVD-ROM)

2 indices, index0 (150) provided

original disc pos #0 + 1990096 (1990096) = #1990096/442:14.46

not relocatable, disc pos for caching/writing not required/not required, no patch infos

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1990096 blocks [_NEC DVD_RW ND-2500A ]

--------------------------------------------------------------

01:59:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 948

Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1:

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4075716608, ISRC ""

DAO layout:

===========

__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_

0 | lead-in | 0 | 0x00 | 0x41

0 | 1 | 0 | 0x00 | 0x41

0 | 1 | 1 | 0x00 | 0x41

1990096 | lead-out | 1 | 0x00 | 0x41

01:59:42 #11 Phase 24 File dlgbrnst.cpp, Line 1800

Début de mise en cache des fichiers

01:59:42 #12 Text 0 File Burncd.cpp, Line 4073

Cache writing successful.

01:59:42 #13 Phase 25 File dlgbrnst.cpp, Line 1800

Cache des fichiers terminé

01:59:42 #14 Phase 32 File dlgbrnst.cpp, Line 1800

Début de simulation à 4x (5 520 Ko/s)

01:59:42 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2264

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

01:59:42 #16 Text 0 File dlgbrnst.cpp, Line 1658

Set remaining time: 12:23,408 (743408ms) -> OK

01:59:42 #17 Text 0 File DVDR.cpp, Line 1512

Recording mode: Sequential Recording Mode

01:59:42 #18 Text 0 File Mmc.cpp, Line 19487

Set BUFE: JustLink -> ON

01:59:42 #19 Text 0 File DVDR.cpp, Line 1643

Start write address at LBA 0

DVD high compatibility mode: Yes

01:59:42 #20 Text 0 File Cdrdrv.cpp, Line 7941

---- DVD Structure: Physical Format Information (00h) ----

Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 5

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: 26127F h

End Sector Number in Layer 0: 0 h

Data in Burst Cutting Area (BCA) does not exist

Media Specific:

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

01:59:42 #21 Text 0 File Cdrdrv.cpp, Line 1277

01:59:42.812 - _NEC DVD_RW ND-2500A\H3 T1 : Queue again later

02:00:19 #22 SCSI -1194 File Cdrdrv.cpp, Line 1431

SCSI Exec, HA 3, TA 1, LUN 0, buffer 0x05D10000

Status: 0x04 (0x01, SCSI_ERR)

HA-Status 0x00 (0x00, OK)

TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x04

CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00

Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A

0x00 0x00 0x00 0x00 0x73 0x04

02:00:19 #23 CDR -1194 File Writer.cpp, Line 301

Echec de la mise à jour PMA

02:00:19 #24 Text 0 File ThreadedTransfer.cpp, Line 229

all writers idle, stopping conversion

02:00:20 #25 Text 0 File ThreadedTransfer.cpp, Line 223

conversion idle, stopping reader

02:00:20 #26 Text 0 File DVDR.cpp, Line 1847

EndDAO: Last written address was -1

02:00:20 #27 Text 0 File dlgbrnst.cpp, Line 1658

Set remaining time: 0:00,000 (0ms) -> OK

02:00:20 #28 Text 0 File dlgbrnst.cpp, Line 1658

Set remaining time: 0:00,000 (0ms) -> OK

02:00:20 #29 Phase 34 File dlgbrnst.cpp, Line 1800

La simulation a échoué à 4x (5 520 Ko/s)

Existing drivers:

File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

et pour finir sur CDRWIN 5:

Erreur lors de l'utilisation du tampon de sortie

NED DVD_RW ND 2500A (F: BUS 0,ID 1): (CDB: 2a000000000000001000, Status: 040002, Sense 037304)

Erreur de mise a jour de l'opc ou du pma

j'espere que vous allez pouvoir m'aider , je suis sous Windows XP PRO SP1

[Ko-Bahn]

C'est peut-être un problème avec tes medias.

T'as essayé avec une autre marque ?

Ou c'est peut-être ton image disque qui est foirée.

M'enfin bon, tant que tu peux jouer avec l'original, c'est pas trop grave...

[David Beckham]

j'ai remarquer quelque chose de bizarre quand je vais dans poste de travail et qu'il ya rien dedans ça marque Lecteur DVD-RW par contre je met un dvd vierge ça marque Lecteur CD , j'y comprend rien

un mec me dit pour pouvoir graver un dvd , faut deja formater pour preparer le graveur a les graver ensuite , au fait comment????????????,

[Ko-Bahn]

Bah, ça c'est vrai pour un DVD RW. Enfin, c'est l'expérience que j'en ai.

Moi j'ai utilisé DVDInfo pour faire ça, mais peut-être que Nero peut le faire (sans doute même, mais je sais pas trop ou, vu que j'ai pas trop cherché).

Quand tu mets un dvd (vierge) dans ton lecteur, et qu'avec Nero tu lui demande les infos du disque (graveur->infos disque), il te dis quoi ?

[cyph3r]

tu as essayé uniquement avec ce fichier "Final Fantasy X 2.nrg " ???

Parce que ça vaudrait ptet le coup d'essayer avec un autre fichier à graver et de préférence qui ne vient pas du même rippeur !!!