Jump to content

Archived

This topic is now archived and is closed to further replies.

Exodus

Nouvelle installation Ubuntu 14.04 – Problèmes

Recommended Posts

Bonjour,

 

Ce week-end j'ai décidé de sauté le pas et de passer ma machine principal sous Linux avec le dernier Ubuntu. Pour infos, j'ai un niveau plutôt débutant / intermédiaire sous Linux, j'utilise RedHat, CentOs et Ubuntu pour de l’administration courante dans le cadre de mon travail et je n’ai jamais eu de soucis avec mon Windows 7 sur mon pc.

Donc j'ai effectué l'installation depuis une clef USB vers un disque neuf avec la 14.04 64bits, pendant l'installation ça m’a dit que je n’avais pas de réseau, déjà là j’aurais dû me poser des questions.

Une fois l’installation terminé et le redémarrage effectué : plus de souris et de clavier USB, et pas de réseau. Je redémarre et je remarque qu’au démarrage mes périphériques sont OK, je vais donc dans le bios, j’enlève l’USB3 et je redémarre : le clavier et la souris reviennent.

Je décide donc de m’atteler au réseau, en dhcp, rien ; en manuel, je ne ping même pas ma passerelle. J’ai vérifié qu’eth0 était bien mon chip réseau : la mac est la bonne. J’ai essayé plusieurs câbles, j’ai aussi rentré la configuration en dur dans /etc/network/interfaces mais même combat : j’arrive à pinguer 127.0.0.1 et mon ip (192.168….) mais même pas ma passerelle. Je fini par redémarrer le pc, et là, le clavier et la souris sont à nouveau HS.

J’ai enfin refait une installe, même combat !

Donc j’en viens à me demander si ce n’est pas un problème de compatibilité avec mon hardware :

  • Carte mère Gigabyte 990XA-UD3
  • Processeur AMD Phenom II X4 à 3.2Ghz
  • Ram Kingston HyperX 8Go DDR3 1600Mhz
  • Carte graphique Sapphire Radeon HD 6850 1Go
  • Disque Dur Western Blue 500Go

 

Donc si quelqu’un à rencontrer les mêmes problèmes et a réussi à résoudre, ou si vous avez des conseils, je suis preneur !

 

 

Share this post


Link to post
Share on other sites

Alors, en cherchant les specs de la carte mère, j'ai découvert qu'elle utilisait un Realtek 8111E en réseau, et il semble que ça ne soit pas le grand amour, aussi bien avec le pilote du noyal que le pilote fourni par Realtek sur leur site web. Certains ont du succès avec le pilote de Realtek, mais ça a l'air de dépendre grandement de la version du noyau utilisé semble-t-il (voir ce sujet pour une OpenSUSE).

 

Pour l'USB3, je vois que Gygabyte passe par une puce Etron EJ168 qui elle aussi n'a pas l'air de se marier très bien avec les manchots (t'as décidément pas de bol). Pour en savoir un peu plus, ils faudrait que tu nous copient un dmesg quand tu branche le clavier/souris dessus (ça permettrait aussi de voir ce qui se passe avec le realtek).

Share this post


Link to post
Share on other sites

Alors, en cherchant les specs de la carte mère, j'ai découvert qu'elle utilisait un Realtek 8111E en réseau, et il semble que ça ne soit pas le grand amour, aussi bien avec le pilote du noyal que le pilote fourni par Realtek sur leur site web. Certains ont du succès avec le pilote de Realtek, mais ça a l'air de dépendre grandement de la version du noyau utilisé semble-t-il (voir ce sujet pour une OpenSUSE).

 

Pour l'USB3, je vois que Gygabyte passe par une puce Etron EJ168 qui elle aussi n'a pas l'air de se marier très bien avec les manchots (t'as décidément pas de bol). Pour en savoir un peu plus, ils faudrait que tu nous copient un dmesg quand tu branche le clavier/souris dessus (ça permettrait aussi de voir ce qui se passe avec le realtek).

 

Merci pour ta réponse, comme tu dis j'ai pas de bol. je vais faire ça ce soir. Pour l'instant je suis au comble de la frustration, j'avais deja la 14.04 sur une eeebox qui sert pour les films et franchement après avoir essayé 15000 trucs pour machine modeste c'est finalement une bien classique qui donne les meilleurs résultats.

 

En ce qui concerne l'USB3 je m'en cogne un peu, le probleme c'est que même désactivé les périphériques font le yoyo; pour le réseau c'est juste le ponpon, c'est la première fois que j'ai un truc tordu comme ça (reconnu mais non fonctionnel).

Share this post


Link to post
Share on other sites

Attend, déjà t'as pas le noyau à recompiler complet pour une carte non supportée (j'ai eu le tour y'a 10 ans, j'avais fini par laisser tomber) :francais:

 

Pour l'USB3 sinon, j'ai cru lire dans la description de la carte une histoire de "USB Power" ou une bêtise dans le genre. A voir si en modifiant quelques paramètres dans le BIOS (voire en testant d'autres ports, l'USB3 pour clavier/souris ça sert à rien), ça pourrait être plus stable.

Share this post


Link to post
Share on other sites

Pour le problème clavier/souris : s'assurer qu'ils soient bien branchés à l'arrière, sur des ports USB 2. Il faut peut-être activer une option usb legacy ou un truc du genre dans le bios aussi.

En principe l'USB Power n'a rien à voir, c'est juste un ampérage plus important sur les ports USB, et je ne pense pas que ça puisse interférer.

 

Pour le problème réseau, ça sent le firmware manquant, ou une connerie du genre.

 

Enfin dans tous les cas pour t'aider il nous faut au moins :

  • Un dmesg - le plus important
  • Un lspci -nn - ça c'est pour facilité la recherche, parce que se baser sur le bouquin de la carte mère, c'est un peu chiant
  • Un lsusb - juste pour voir, ça peut pas faire de mal

Voilà ! Si on pouvait avoir tout ça ce serait cool !

Share this post


Link to post
Share on other sites

Je connaissais pas l'option -nn pour lspci, et en regardant les switches, y'a aussi l'option -k pour voir les modules attachés au matos, ça pourrait pas aider aussi ?

 

Sinon, serait-il possible d'essayer aussi une autre distribution ? des fois que certains réglages du noyal par défaut soient plus efficaces (mine de rien, question pilotes, Ubuntu fait pas mal de bricolage, ce qui passe bien la plupart du temps, mais sait-on jamais...)

Share this post


Link to post
Share on other sites

désolé je suis en mini démanagement, j'essai de faire tout ça ce soir, pour l'instant je n'ai pas retoucher la bécanne. Je vais regarder aussi s'il n'y a pas un bios plus récent.

Share this post


Link to post
Share on other sites

bon, non sans mal car en fait aucun périphérique usb ne fonctionne, juste un vieux clavier ps2:

 

 

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=a46c0f08-d49a-4bc4-8309-e5423c4bd6d4 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea18fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bea19000-0x00000000bea47fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bea48000-0x00000000bee3afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bee3b000-0x00000000bf105fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf106000-0x00000000bf158fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bf159000-0x00000000bf159fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf35ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf360000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xbee2b000  ACPI 2.0=0xbee2b000  SMBIOS=0xf04c0  MPS=0xfd4b0
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
[    0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
[    0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[    0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x00000000024ff000) (20MB)
[    0.000000] efi: mem06: type=7, attr=0xf, range=[0x00000000024ff000-0x0000000035ba0000) (822MB)
[    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000035ba0000-0x0000000036dc8000) (18MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000036dc8000-0x0000000083a9f000) (1228MB)
[    0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000083a9f000-0x00000000b08aa000) (718MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x00000000b08aa000-0x00000000b08b0000) (0MB)
[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x00000000b08b0000-0x00000000b0a86000) (1MB)
[    0.000000] efi: mem12: type=1, attr=0xf, range=[0x00000000b0a86000-0x00000000b0bba000) (1MB)
[    0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000b0bba000-0x00000000b385e000) (44MB)
[    0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000b385e000-0x00000000b3a98000) (2MB)
[    0.000000] efi: mem15: type=7, attr=0xf, range=[0x00000000b3a98000-0x00000000b3aab000) (0MB)
[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000b3aab000-0x00000000b3aaf000) (0MB)
[    0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000b3aaf000-0x00000000b3abe000) (0MB)
[    0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000b3abe000-0x00000000bd743000) (156MB)
[    0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000bd743000-0x00000000bd745000) (0MB)
[    0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000bd745000-0x00000000be33d000) (11MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000be33d000-0x00000000be7ed000) (4MB)
[    0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000be7ed000-0x00000000be7f7000) (0MB)
[    0.000000] efi: mem23: type=3, attr=0xf, range=[0x00000000be7f7000-0x00000000bea19000) (2MB)
[    0.000000] efi: mem24: type=0, attr=0xf, range=[0x00000000bea19000-0x00000000bea22000) (0MB)
[    0.000000] efi: mem25: type=0, attr=0xf, range=[0x00000000bea22000-0x00000000bea48000) (0MB)
[    0.000000] efi: mem26: type=10, attr=0xf, range=[0x00000000bea48000-0x00000000bed18000) (2MB)
[    0.000000] efi: mem27: type=10, attr=0xf, range=[0x00000000bed18000-0x00000000bee3b000) (1MB)
[    0.000000] efi: mem28: type=6, attr=0x800000000000000f, range=[0x00000000bee3b000-0x00000000beeca000) (0MB)
[    0.000000] efi: mem29: type=6, attr=0x800000000000000f, range=[0x00000000beeca000-0x00000000bf106000) (2MB)
[    0.000000] efi: mem30: type=5, attr=0x800000000000000f, range=[0x00000000bf106000-0x00000000bf116000) (0MB)
[    0.000000] efi: mem31: type=5, attr=0x800000000000000f, range=[0x00000000bf116000-0x00000000bf159000) (0MB)
[    0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000bf159000-0x00000000bf15a000) (0MB)
[    0.000000] efi: mem33: type=10, attr=0xf, range=[0x00000000bf15a000-0x00000000bf360000) (2MB)
[    0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000bf360000-0x00000000bf4cc000) (1MB)
[    0.000000] efi: mem35: type=3, attr=0xf, range=[0x00000000bf4cc000-0x00000000bf7a4000) (2MB)
[    0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000bf7a4000-0x00000000bf7a5000) (0MB)
[    0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000bf7a5000-0x00000000bf7a7000) (0MB)
[    0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000bf7a7000-0x00000000bf7a9000) (0MB)
[    0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000bf7a9000-0x00000000bf7ad000) (0MB)
[    0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000bf7ad000-0x00000000bf7c2000) (0MB)
[    0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000bf7c2000-0x00000000bf7d4000) (0MB)
[    0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000bf7d4000-0x00000000bf7d7000) (0MB)
[    0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000bf7d7000-0x00000000bf7d9000) (0MB)
[    0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000bf7d9000-0x00000000bf7db000) (0MB)
[    0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000bf7db000-0x00000000bf7dc000) (0MB)
[    0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000bf7dc000-0x00000000bf800000) (0MB)
[    0.000000] efi: mem47: type=7, attr=0xf, range=[0x0000000100001000-0x0000000240000000) (5119MB)
[    0.000000] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[    0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[    0.000000] efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
[    0.000000] efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[    0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
[    0.000000] efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
[    0.000000] efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990XA-UD3, BIOS FD 02/04/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BF800000 mask FFFFFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000240000000 aka 9216M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[    0.000000] total RAM covered: 3064M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 16M     num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[    0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[    0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[    0.000000]  [mem 0x23fe00000-0x23fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[    0.000000]  [mem 0x23c000000-0x23fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbea18fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbe9fffff] page 2M
[    0.000000]  [mem 0xbea00000-0xbea18fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf159000-0xbf159fff]
[    0.000000]  [mem 0xbf159000-0xbf159fff] page 4k
[    0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbf360000-0xbf7fffff]
[    0.000000]  [mem 0xbf360000-0xbf3fffff] page 4k
[    0.000000]  [mem 0xbf400000-0xbf7fffff] page 2M
[    0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[    0.000000]  [mem 0x100001000-0x1001fffff] page 4k
[    0.000000]  [mem 0x100200000-0x13fffffff] page 2M
[    0.000000]  [mem 0x140000000-0x1ffffffff] page 1G
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35ba0000-0x36dc7fff]
[    0.000000] ACPI: RSDP 00000000bee2b000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000bee2b070 00005C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000bee31808 0000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
[    0.000000] ACPI: DSDT 00000000bee2b160 0066A3 (v02 ALASKA    A M I 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bee35f80 000040
[    0.000000] ACPI: APIC 00000000bee31900 00007E (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000bee31980 000044 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000bee319c8 00003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 00000000bee31a08 000038 (v01 ALASKA    A M I 01072009 AMI  00000005)
[    0.000000] ACPI: BGRT 00000000bee31a40 000038 (v00 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MATS 00000000bee31a78 000034 (v02 ALASKA    A M I 00000002 w?x2 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[    0.000000]   NODE_DATA [mem 0x23fff8000-0x23fffcfff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0xbea18fff]
[    0.000000]   node   0: [mem 0xbf159000-0xbf159fff]
[    0.000000]   node   0: [mem 0xbf360000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100001000-0x23fffffff]
[    0.000000] On node 0 totalpages: 2092632
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12155 pages used for memmap
[    0.000000]   DMA32 zone: 777914 pages, LIFO batch:31
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310719 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 72
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbea19000-0xbea47fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbea48000-0xbee3afff]
[    0.000000] PM: Registered nosave memory: [mem 0xbee3b000-0xbf105fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf106000-0xbf158fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf15a000-0xbf35ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023fc00000 s86336 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2059909
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=a46c0f08-d49a-4bc4-8309-e5423c4bd6d4 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f8000000 size 64 MB
[    0.000000] Memory: 7955948K/8370528K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 414580K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]     Offload RCU callbacks from all CPUs
[    0.000000]     Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3214.453 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.90 BogoMIPS (lpj=12857812)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000710] Security Framework initialized
[    0.000723] AppArmor: AppArmor initialized
[    0.000724] Yama: becoming mindful.
[    0.001231] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003472] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004522] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.004535] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.004756] Initializing cgroup subsys memory
[    0.004762] Initializing cgroup subsys devices
[    0.004764] Initializing cgroup subsys freezer
[    0.004765] Initializing cgroup subsys blkio
[    0.004767] Initializing cgroup subsys perf_event
[    0.004769] Initializing cgroup subsys hugetlb
[    0.004786] tseg: 00bf800000
[    0.004789] CPU: Physical Processor ID: 0
[    0.004789] CPU: Processor Core ID: 0
[    0.004791] mce: CPU supports 6 MCE banks
[    0.004796] LVT offset 0 assigned for vector 0xf9
[    0.004800] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.004800] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.004800] tlb_flushall_shift: 4
[    0.004887] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
[    0.005547] ACPI: Core revision 20131115
[    0.007143] ACPI: All ACPI Tables successfully acquired
[    0.012664] ftrace: allocating 28408 entries in 111 pages
[    0.022874] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062614] smpboot: CPU0: AMD Phenom II X4 955 Processor (fam: 10, model: 04, stepping: 03)
[    0.169299] Performance Events: AMD PMU driver.
[    0.169303] ... version:                0
[    0.169304] ... bit width:              48
[    0.169305] ... generic registers:      4
[    0.169306] ... value mask:             0000ffffffffffff
[    0.169307] ... max period:             00007fffffffffff
[    0.169308] ... fixed-purpose events:   0
[    0.169309] ... event mask:             000000000000000f
[    0.170592] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.170661] x86: Booting SMP configuration:
[    0.170662] .... node  #0, CPUs:      #1 #2 #3
[    0.209961] x86: Booted up 1 node, 4 CPUs
[    0.209964] smpboot: Total of 4 processors activated (25715.62 BogoMIPS)
[    0.214490] devtmpfs: initialized
[    0.217382] EVM: security.selinux
[    0.217384] EVM: security.SMACK64
[    0.217385] EVM: security.ima
[    0.217386] EVM: security.capability
[    0.217472] PM: Registering ACPI NVS region [mem 0xbea48000-0xbee3afff] (4141056 bytes)
[    0.217517] PM: Registering ACPI NVS region [mem 0xbf15a000-0xbf35ffff] (2121728 bytes)
[    0.218336] pinctrl core: initialized pinctrl subsystem
[    0.218392] regulator-dummy: no parameters
[    0.218415] RTC time: 18:35:51, date: 07/10/14
[    0.218446] NET: Registered protocol family 16
[    0.218538] cpuidle: using governor ladder
[    0.218539] cpuidle: using governor menu
[    0.218543] node 0 link 0: io port [d000, ffff]
[    0.218545] TOM: 00000000c0000000 aka 3072M
[    0.218547] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.218549] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
[    0.218553] TOM2: 0000000240000000 aka 9216M
[    0.218554] bus: [bus 00-1f] on node 0 link 0
[    0.218555] bus: 00 [io  0x0000-0xffff]
[    0.218557] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.218558] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.218559] bus: 00 [mem 0x240000000-0xfcffffffff]
[    0.218613] ACPI: bus type PCI registered
[    0.218615] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.218661] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.218663] PCI: not using MMCONFIG
[    0.218664] PCI: Using configuration type 1 for base access
[    0.218665] PCI: Using configuration type 1 for extended access
[    0.219534] bio: create slab <bio-0> at 0
[    0.219681] ACPI: Added _OSI(Module Device)
[    0.219682] ACPI: Added _OSI(Processor Device)
[    0.219683] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.219684] ACPI: Added _OSI(Processor Aggregator Device)
[    0.221577] ACPI: Executed 3 blocks of module-level executable AML code
[    0.224578] ACPI: Interpreter enabled
[    0.224585] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.224588] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.224599] ACPI: (supports S0 S3 S4 S5)
[    0.224600] ACPI: Using IOAPIC for interrupt routing
[    0.224699] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.224729] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.233896] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.233987] ACPI: No dock devices found.
[    0.282369] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.282375] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.282378] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.282692] PCI host bridge to bus 0000:00
[    0.282694] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.282696] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.282698] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.282699] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.282701] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.282703] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.282704] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.282706] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[    0.282716] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.282818] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.282847] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.282889] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.282919] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.282948] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.282989] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.283020] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.283034] pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
[    0.283041] pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
[    0.283048] pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
[    0.283055] pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
[    0.283062] pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
[    0.283070] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    0.283084] pci 0000:00:11.0: set SATA to AHCI mode
[    0.283164] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.283175] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    0.283251] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.283276] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.283290] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    0.283350] pci 0000:00:12.2: supports D1 D2
[    0.283351] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.283394] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.283420] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.283430] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    0.283506] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.283531] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.283545] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    0.283604] pci 0000:00:13.2: supports D1 D2
[    0.283606] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.283647] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.283672] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.283769] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.283779] pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
[    0.283786] pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
[    0.283793] pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
[    0.283800] pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
[    0.283808] pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
[    0.283880] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.283896] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    0.283944] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.283984] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.284005] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.284105] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.284165] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.284186] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.284196] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    0.284273] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.284303] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.284313] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    0.284390] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.284417] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.284431] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    0.284490] pci 0000:00:16.2: supports D1 D2
[    0.284491] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.284533] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.284557] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.284615] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.284671] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.284726] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.284784] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.284878] pci 0000:01:00.0: [1002:6738] type 00 class 0x030000
[    0.284891] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.284901] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[    0.284908] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.284921] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    0.284952] pci 0000:01:00.0: supports D1 D2
[    0.284989] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[    0.285001] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[    0.285052] pci 0000:01:00.1: supports D1 D2
[    0.292320] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.292325] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.292327] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.292331] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.292392] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.292404] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.292424] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.292437] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.292489] pci 0000:02:00.0: supports D1 D2
[    0.292490] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.292518] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.300331] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.300336] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.300340] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.300404] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.300411] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.300413] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.300415] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.300416] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.300418] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.300419] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.300421] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[    0.316464] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.316514] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.316563] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.316610] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.316649] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[    0.316683] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[    0.316713] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[    0.316744] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[    0.316837] ACPI: \_SB_.PCI0: notify handler is installed
[    0.316870] Found 1 acpi root devices
[    0.316965] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.316967] vgaarb: loaded
[    0.316968] vgaarb: bridge control possible 0000:01:00.0
[    0.317096] SCSI subsystem initialized
[    0.317151] libata version 3.00 loaded.
[    0.317168] ACPI: bus type USB registered
[    0.317180] usbcore: registered new interface driver usbfs
[    0.317186] usbcore: registered new interface driver hub
[    0.317210] usbcore: registered new device driver usb
[    0.317317] PCI: Using ACPI for IRQ routing
[    0.323397] PCI: pci_cache_line_size set to 64 bytes
[    0.323438] e820: reserve RAM buffer [mem 0xbea19000-0xbfffffff]
[    0.323440] e820: reserve RAM buffer [mem 0xbf15a000-0xbfffffff]
[    0.323441] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.323508] NetLabel: Initializing
[    0.323509] NetLabel:  domain hash size = 128
[    0.323510] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.323520] NetLabel:  unlabeled traffic allowed by default
[    0.323580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.323583] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.325648] Switched to clocksource hpet
[    0.330126] AppArmor: AppArmor Filesystem Enabled
[    0.330145] pnp: PnP ACPI init
[    0.330154] ACPI: bus type PNP registered
[    0.330242] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.330245] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.330423] system 00:01: [io  0x040b] has been reserved
[    0.330425] system 00:01: [io  0x04d6] has been reserved
[    0.330426] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.330428] system 00:01: [io  0x0c14] has been reserved
[    0.330431] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.330433] system 00:01: [io  0x0c52] has been reserved
[    0.330435] system 00:01: [io  0x0c6c] has been reserved
[    0.330436] system 00:01: [io  0x0c6f] has been reserved
[    0.330438] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.330440] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.330441] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.330443] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.330445] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.330447] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.330448] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.330450] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.330452] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.330454] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.330456] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.330458] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.330460] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.330461] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.330463] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.330465] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.330467] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    0.330469] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.330560] system 00:02: [io  0x0220-0x0227] has been reserved
[    0.330562] system 00:02: [io  0x0228-0x0237] has been reserved
[    0.330564] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.330566] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.330603] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.330775] pnp 00:04: [dma 0 disabled]
[    0.330811] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.330819] pnp 00:05: [dma 4]
[    0.330834] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.330853] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.330870] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.330911] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.330913] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.330932] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.330961] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331056] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331142] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.331144] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.331246] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.331249] pnp: PnP ACPI: found 14 devices
[    0.331250] ACPI: bus type PNP unregistered
[    0.337351] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.337354] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.337357] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.337359] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.337362] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.337364] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.337367] pci 0000:00:09.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.337370] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.337379] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.337380] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.337382] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.337383] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.337385] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.337386] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.337388] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[    0.337389] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.337391] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.337392] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.337394] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.337395] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.337397] pci_bus 0000:03: resource 4 [io  0x0000-0x03af]
[    0.337398] pci_bus 0000:03: resource 5 [io  0x03e0-0x0cf7]
[    0.337400] pci_bus 0000:03: resource 6 [io  0x03b0-0x03df]
[    0.337401] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff]
[    0.337403] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[    0.337404] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[    0.337406] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[    0.337432] NET: Registered protocol family 2
[    0.337577] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.337782] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.338042] TCP: Hash tables configured (established 65536 bind 65536)
[    0.338080] TCP: reno registered
[    0.338089] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.338138] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.338224] NET: Registered protocol family 1
[    0.662300] pci 0000:01:00.0: Boot video device
[    0.662307] PCI: CLS 64 bytes, default 64
[    0.662362] Trying to unpack rootfs image as initramfs...
[    0.911076] Freeing initrd memory: 18592K (ffff880035ba0000 - ffff880036dc8000)
[    0.911307] PCI-DMA: Disabling AGP.
[    0.912624] PCI-DMA: aperture base @ f8000000 size 65536 KB
[    0.912626] init_memory_mapping: [mem 0xf8000000-0xfbffffff]
[    0.912628]  [mem 0xf8000000-0xfbffffff] page 2M
[    0.912634] PCI-DMA: using GART IOMMU.
[    0.912637] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.916078] LVT offset 1 assigned for vector 0x400
[    0.916087] IBS: LVT offset 1 assigned
[    0.916108] perf: AMD IBS detected (0x0000001f)
[    0.916144] microcode: CPU0: patch_level=0x010000c8
[    0.916151] microcode: CPU1: patch_level=0x010000c8
[    0.916161] microcode: CPU2: patch_level=0x010000c8
[    0.916170] microcode: CPU3: patch_level=0x010000c8
[    0.916229] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.916231] Scanning for low memory corruption every 60 seconds
[    0.916404] Initialise system trusted keyring
[    0.916442] audit: initializing netlink socket (disabled)
[    0.916454] type=2000 audit(1405017350.808:1): initialized
[    0.937049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.938306] VFS: Disk quotas dquot_6.5.2
[    0.938342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.938742] fuse init (API version 7.22)
[    0.938799] msgmni has been set to 16059
[    0.938840] Key type big_key registered
[    0.939236] Key type asymmetric registered
[    0.939238] Asymmetric key parser 'x509' registered
[    0.939260] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.939293] io scheduler noop registered
[    0.939295] io scheduler deadline registered (default)
[    0.939313] io scheduler cfq registered
[    0.939543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.939554] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.939590] efifb: probing for efifb
[    0.939708] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k
[    0.939710] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.939711] efifb: scrolling: redraw
[    0.939712] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.941827] Console: switching to colour frame buffer device 128x48
[    0.943870] fb0: EFI VGA frame buffer device
[    0.943882] ipmi message handler version 39.2
[    0.943934] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.943938] ACPI: Power Button [PWRB]
[    0.943964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.943966] ACPI: Power Button [PWRF]
[    0.944236] GHES: HEST is not enabled!
[    0.944316] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.964699] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.965736] Linux agpgart interface v0.103
[    0.966793] brd: module loaded
[    0.967428] loop: module loaded
[    0.967719] libphy: Fixed MDIO Bus: probed
[    0.967788] tun: Universal TUN/TAP device driver, 1.6
[    0.967789] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.967824] PPP generic driver version 2.4.2
[    0.967863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.967866] ehci-pci: EHCI PCI platform driver
[    0.967936] QUIRK: Enable AMD PLL fix
[    0.967951] ehci-pci 0000:00:12.2: EHCI Host Controller
[    0.967956] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.967960] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.967968] ehci-pci 0000:00:12.2: debug port 1
[    0.968003] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[    0.978608] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.978653] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.978655] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.978657] usb usb1: Product: EHCI Host Controller
[    0.978658] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.978659] usb usb1: SerialNumber: 0000:00:12.2
[    0.978759] hub 1-0:1.0: USB hub found
[    0.978764] hub 1-0:1.0: 5 ports detected
[    0.978913] ehci-pci 0000:00:13.2: EHCI Host Controller
[    0.978917] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.978920] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.978928] ehci-pci 0000:00:13.2: debug port 1
[    0.978952] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[    0.990625] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.990666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.990668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.990669] usb usb2: Product: EHCI Host Controller
[    0.990671] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    0.990672] usb usb2: SerialNumber: 0000:00:13.2
[    0.990754] hub 2-0:1.0: USB hub found
[    0.990759] hub 2-0:1.0: 5 ports detected
[    0.990906] ehci-pci 0000:00:16.2: EHCI Host Controller
[    0.990909] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    0.990912] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.990920] ehci-pci 0000:00:16.2: debug port 1
[    0.990944] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[    1.002638] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.002671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.002673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.002674] usb usb3: Product: EHCI Host Controller
[    1.002676] usb usb3: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[    1.002677] usb usb3: SerialNumber: 0000:00:16.2
[    1.002773] hub 3-0:1.0: USB hub found
[    1.002778] hub 3-0:1.0: 4 ports detected
[    1.002853] ehci-platform: EHCI generic platform driver
[    1.002860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.002861] ohci-pci: OHCI PCI platform driver
[    1.002927] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.002930] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.002950] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    1.062731] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.062733] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.062735] usb usb4: Product: OHCI PCI host controller
[    1.062736] usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.062737] usb usb4: SerialNumber: 0000:00:12.0
[    1.062839] hub 4-0:1.0: USB hub found
[    1.062846] hub 4-0:1.0: 5 ports detected
[    1.062980] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.062984] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.062995] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[    1.122812] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.122815] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.122816] usb usb5: Product: OHCI PCI host controller
[    1.122817] usb usb5: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.122819] usb usb5: SerialNumber: 0000:00:13.0
[    1.122915] hub 5-0:1.0: USB hub found
[    1.122923] hub 5-0:1.0: 5 ports detected
[    1.123059] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.123063] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.123073] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    1.182898] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.182900] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.182901] usb usb6: Product: OHCI PCI host controller
[    1.182903] usb usb6: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.182904] usb usb6: SerialNumber: 0000:00:14.5
[    1.183004] hub 6-0:1.0: USB hub found
[    1.183011] hub 6-0:1.0: 2 ports detected
[    1.183121] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.183125] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.183136] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[    1.242986] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.242988] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.242990] usb usb7: Product: OHCI PCI host controller
[    1.242991] usb usb7: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[    1.242992] usb usb7: SerialNumber: 0000:00:16.0
[    1.243087] hub 7-0:1.0: USB hub found
[    1.243094] hub 7-0:1.0: 4 ports detected
[    1.243165] ohci-platform: OHCI generic platform driver
[    1.243171] uhci_hcd: USB Universal Host Controller Interface driver
[    1.243218] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.243219] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.243338] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.243406] mousedev: PS/2 mouse device common for all mice
[    1.243503] rtc_cmos 00:06: RTC can wake from S4
[    1.243586] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.243604] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.243649] device-mapper: uevent: version 1.0.3
[    1.243692] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.243697] ledtrig-cpu: registered to indicate activity on CPUs
[    1.243698] EFI Variables Facility v0.08 2004-May-17
[    1.248124] TCP: cubic registered
[    1.248193] NET: Registered protocol family 10
[    1.248333] NET: Registered protocol family 17
[    1.248339] Key type dns_resolver registered
[    1.248566] Loading compiled-in X.509 certificates
[    1.249425] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[    1.249434] registered taskstats version 1
[    1.251615] Key type trusted registered
[    1.253283] Key type encrypted registered
[    1.254830] AppArmor: AppArmor sha1 policy hashing enabled
[    1.254834] IMA: No TPM chip found, activating TPM-bypass!
[    1.255020] regulator-dummy: disabling
[    1.255064]   Magic number: 6:695:594
[    1.255139] rtc_cmos 00:06: setting system clock to 2014-07-10 18:35:52 UTC (1405017352)
[    1.255191] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[    1.255974] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.255976] EDD information not available.
[    1.256009] PM: Hibernation image not present or could not be loaded.
[    1.257220] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[    1.257222] Write protecting the kernel read-only data: 12288k
[    1.259217] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[    1.260804] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[    1.264039] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.271876] systemd-udevd[116]: starting version 204
[    1.288781] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.288793] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.289266] r8169 0000:02:00.0: irq 72 for MSI/MSI-X
[    1.289444] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c58000, 94:de:80:24:40:47, XID 0c900800 IRQ 72
[    1.289446] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.290176] scsi0 : pata_atiixp
[    1.290461] scsi1 : pata_atiixp
[    1.290494] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.290496] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.290557] ahci 0000:00:11.0: version 3.0
[    1.290699] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.290702] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.291351] scsi2 : ahci
[    1.295052] scsi3 : ahci
[    1.295124] scsi4 : ahci
[    1.295224] scsi5 : ahci
[    1.295274] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    1.295276] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    1.295278] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[    1.295281] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[    1.615589] ata6: SATA link down (SStatus 0 SControl 300)
[    1.783757] usb 5-4: new full-speed USB device number 2 using ohci-pci
[    1.787772] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.787800] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.787821] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.788757] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
[    1.788760] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.789355] ata5.00: ATAPI: Optiarc DVD RW AD-5240S, 1.02, max UDMA/100
[    1.789603] ata3.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[    1.789604] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.789814] ata4.00: configured for UDMA/133
[    1.791088] ata3.00: configured for UDMA/133
[    1.791249] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[    1.791381] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.791406] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.791517] sd 2:0:0:0: [sda] Write Protect is off
[    1.791519] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.791534] ata5.00: configured for UDMA/100
[    1.791557] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.791559] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[    1.791679] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.791713] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.791736] sd 3:0:0:0: [sdb] Write Protect is off
[    1.791749] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.791770] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.794262] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-5240S  1.02 PQ: 0 ANSI: 5
[    1.795709]  sdb: sdb1
[    1.795991] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.796167] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.796169] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.796240] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.796299] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.841452]  sda: sda1 sda2 sda3
[    1.841782] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.915939] tsc: Refined TSC clocksource calibration: 3214.614 MHz
[    1.927997] usb 5-4: device descriptor read/64, error -32
[    2.172306] usb 5-4: device descriptor read/64, error -32
[    2.412655] usb 5-4: new full-speed USB device number 3 using ohci-pci
[    2.552851] usb 5-4: device descriptor read/64, error -32
[    2.797202] usb 5-4: device descriptor read/64, error -32
[    2.927338] Switched to clocksource tsc
[    3.037540] usb 5-4: new full-speed USB device number 4 using ohci-pci
[    3.446114] usb 5-4: device not accepting address 4, error -32
[    3.582315] usb 5-4: new full-speed USB device number 5 using ohci-pci
[    3.990893] usb 5-4: device not accepting address 5, error -32
[    3.990906] hub 5-0:1.0: unable to enumerate USB device on port 4
[    4.255262] usb 5-5: new low-speed USB device number 6 using ohci-pci
[    4.305687] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.395493] usb 5-5: device descriptor read/64, error -32
[    4.501575] random: nonblocking pool is initialized
[    4.639823] usb 5-5: device descriptor read/64, error -32
[    4.880169] usb 5-5: new low-speed USB device number 7 using ohci-pci
[    5.020375] usb 5-5: device descriptor read/64, error -32
[    5.264714] usb 5-5: device descriptor read/64, error -32
[    5.505061] usb 5-5: new low-speed USB device number 8 using ohci-pci
[    5.913640] usb 5-5: device not accepting address 8, error -32
[    6.049838] usb 5-5: new low-speed USB device number 9 using ohci-pci
[    6.458410] usb 5-5: device not accepting address 9, error -32
[    6.458446] hub 5-0:1.0: unable to enumerate USB device on port 5
[    8.826903] Adding 8364028k swap on /dev/sda3.  Priority:-1 extents:1 across:8364028k FS
[    8.902176] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.035544] systemd-udevd[298]: starting version 204
[    9.176320] [drm] Initialized drm 1.1.0 20060810
[    9.182770] lp: driver loaded but no devices found
[    9.196574] MCE: In-kernel MCE decoding enabled.
[    9.198580] EDAC MC: Ver: 3.0.0
[    9.199746] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    9.199788] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    9.200019] AMD64 EDAC driver v3.4.0
[    9.200042] EDAC amd64: DRAM ECC disabled.
[    9.200047] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    9.200047]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    9.200047]  (Note that use of the override may cause unknown side effects.)
[    9.200921] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    9.200969] sp5100_tco: PCI Revision ID: 0x42
[    9.200997] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    9.201007] sp5100_tco: Last reboot was not triggered by watchdog.
[    9.201099] sp5100_tco: initialized (0xffffc90010e4eb00). heartbeat=60 sec (nowayout=0)
[    9.203522] ppdev: user-space parallel port driver
[    9.209193] [drm] radeon kernel modesetting enabled.
[    9.209245] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    9.209246] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
[    9.209263] Console: switching to colour dummy device 80x25
[    9.209536] [drm] initializing kernel modesetting (BARTS 0x1002:0x6738 0x174B:0x174B).
[    9.209550] [drm] register mmio base: 0xFEA20000
[    9.209552] [drm] register mmio size: 131072
[    9.209610] ATOM BIOS: BARTS
[    9.209736] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    9.209738] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    9.209740] [drm] Detected VRAM RAM=1024M, BAR=256M
[    9.209741] [drm] RAM width 256bits DDR
[    9.209795] [TTM] Zone  kernel: Available graphics memory: 4112582 kiB
[    9.209796] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    9.209797] [TTM] Initializing pool allocator
[    9.209802] [TTM] Initializing DMA pool allocator
[    9.209822] [drm] radeon: 1024M of VRAM memory ready
[    9.209823] [drm] radeon: 1024M of GTT memory ready.
[    9.209833] [drm] Loading BARTS Microcode
[    9.221470] hda-intel 0000:00:14.2: Using LPIB position fix
[    9.229819] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[    9.232435] kvm: Nested Virtualization enabled
[    9.232439] kvm: Nested Paging enabled
[    9.237725] SKU: Nid=0x1d sku_cfg=0x4005e601
[    9.237728] SKU: port_connectivity=0x1
[    9.237729] SKU: enable_pcbeep=0x0
[    9.237730] SKU: check_sum=0x00000005
[    9.237731] SKU: customization=0x000000e6
[    9.237732] SKU: external_amp=0x0
[    9.237732] SKU: platform_type=0x0
[    9.237733] SKU: swap=0x0
[    9.237734] SKU: override=0x1
[    9.238142] wmi: Mapper loaded
[    9.238160] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    9.238162]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.238163]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.238164]    mono: mono_out=0x0
[    9.238165]    dig-out=0x11/0x1e
[    9.238166]    inputs:
[    9.238167]      Front Mic=0x19
[    9.238168]      Rear Mic=0x18
[    9.238169]      Line=0x1a
[    9.238171] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[    9.238172] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[    9.253097] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    9.253706] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    9.253819] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    9.253936] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    9.254009] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    9.254657] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    9.254757] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[    9.254908] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[    9.274805] type=1400 audit(1405017360.503:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=364 comm="apparmor_parser"
[    9.274812] type=1400 audit(1405017360.503:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
[    9.274816] type=1400 audit(1405017360.503:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
[    9.275193] type=1400 audit(1405017360.503:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=364 comm="apparmor_parser"
[    9.275198] type=1400 audit(1405017360.503:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
[    9.275399] type=1400 audit(1405017360.503:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=364 comm="apparmor_parser"
[    9.479031] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    9.480385] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    9.492581] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[    9.492685] radeon 0000:01:00.0: WB enabled
[    9.492688] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8802320f5c00
[    9.492690] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8802320f5c0c
[    9.494134] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900116b2118
[    9.494136] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.494137] [drm] Driver supports precise vblank timestamp query.
[    9.494156] radeon 0000:01:00.0: irq 73 for MSI/MSI-X
[    9.494168] radeon 0000:01:00.0: radeon: using MSI.
[    9.494198] [drm] radeon: irq initialized.
[    9.510473] [drm] ring test on 0 succeeded in 2 usecs
[    9.510538] [drm] ring test on 3 succeeded in 1 usecs
[    9.696493] [drm] ring test on 5 succeeded in 2 usecs
[    9.696500] [drm] UVD initialized successfully.
[    9.696582] [drm] Enabling audio 0 support
[    9.696632] [drm] ib test on ring 0 succeeded in 0 usecs
[    9.696680] [drm] ib test on ring 3 succeeded in 0 usecs
[    9.848022] [drm] ib test on ring 5 succeeded
[    9.848625] [drm] Radeon Display Connectors
[    9.848627] [drm] Connector 0:
[    9.848628] [drm]   DP-1
[    9.848629] [drm]   HPD4
[    9.848630] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    9.848631] [drm]   Encoders:
[    9.848632] [drm]     DFP1: INTERNAL_UNIPHY2
[    9.848633] [drm] Connector 1:
[    9.848634] [drm]   HDMI-A-1
[    9.848634] [drm]   HPD3
[    9.848636] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    9.848636] [drm]   Encoders:
[    9.848637] [drm]     DFP2: INTERNAL_UNIPHY2
[    9.848638] [drm] Connector 2:
[    9.848639] [drm]   DVI-D-1
[    9.848640] [drm]   HPD1
[    9.848641] [drm]   DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[    9.848641] [drm]   Encoders:
[    9.848642] [drm]     DFP3: INTERNAL_UNIPHY1
[    9.848643] [drm] Connector 3:
[    9.848644] [drm]   DVI-I-1
[    9.848645] [drm]   HPD6
[    9.848646] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    9.848647] [drm]   Encoders:
[    9.848648] [drm]     DFP4: INTERNAL_UNIPHY
[    9.848649] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    9.848746] [drm] Internal thermal controller with fan control
[    9.849862] [drm] radeon: power management initialized
[    9.889378] [drm] fb mappable at 0xC0474000
[    9.889380] [drm] vram apper at 0xC0000000
[    9.889381] [drm] size 8294400
[    9.889382] [drm] fb depth is 24
[    9.889383] [drm]    pitch is 7680
[    9.889452] fbcon: radeondrmfb (fb0) is primary device
[   10.098070] Console: switching to colour frame buffer device 240x67
[   10.103424] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   10.103426] radeon 0000:01:00.0: registered panic notifier
[   10.103430] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   10.103483] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[   10.103569] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.103571] hda-intel 0000:01:00.1: Using LPIB position fix
[   10.103605] snd_hda_intel 0000:01:00.1: irq 74 for MSI/MSI-X
[   10.107741] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   10.112667] HDMI ATI/AMD: no speaker allocation for ELD
[   10.112719] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[   15.128940] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   15.551750] Bluetooth: Core ver 2.17
[   15.551767] NET: Registered protocol family 31
[   15.551768] Bluetooth: HCI device and connection manager initialized
[   15.551776] Bluetooth: HCI socket layer initialized
[   15.551778] Bluetooth: L2CAP socket layer initialized
[   15.551781] Bluetooth: SCO socket layer initialized
[   15.554873] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.554876] Bluetooth: BNEP filters: protocol multicast
[   15.554883] Bluetooth: BNEP socket layer initialized
[   15.557011] Bluetooth: RFCOMM TTY layer initialized
[   15.557018] Bluetooth: RFCOMM socket layer initialized
[   15.557024] Bluetooth: RFCOMM ver 1.11
[   15.587196] init: avahi-cups-reload main process (669) terminated with status 1
[   15.605971] type=1400 audit(1405017366.823:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=683 comm="apparmor_parser"
[   15.605978] type=1400 audit(1405017366.823:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=683 comm="apparmor_parser"
[   15.606357] type=1400 audit(1405017366.823:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=683 comm="apparmor_parser"
[   16.130351] type=1400 audit(1405017367.347:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=703 comm="apparmor_parser"
[  135.704690] type=1400 audit(1405017486.751:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=768 comm="apparmor_parser"
[  135.704698] type=1400 audit(1405017486.751:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=768 comm="apparmor_parser"
[  135.704940] type=1400 audit(1405017486.751:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=769 comm="apparmor_parser"
[  135.704949] type=1400 audit(1405017486.751:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=769 comm="apparmor_parser"
[  135.704953] type=1400 audit(1405017486.751:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser"
[  135.704960] type=1400 audit(1405017486.751:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=768 comm="apparmor_parser"
[  135.705343] type=1400 audit(1405017486.751:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=769 comm="apparmor_parser"
[  135.705347] type=1400 audit(1405017486.751:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser"
[  135.705548] type=1400 audit(1405017486.751:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=769 comm="apparmor_parser"
[  135.707355] type=1400 audit(1405017486.755:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=773 comm="apparmor_parser"
 

 

le lspci:

 

 

00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16]
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H) [1002:5a1c]
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [iDE mode] [1002:4390] (rev 40)
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40)
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Barts XT [Radeon HD 6870] [1002:6738]
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6800 Series] [1002:aa88]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)

 

et le lsusb:

 

 

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 

Share this post


Link to post
Share on other sites
hub 5-0:1.0: unable to enumerate USB device on port 4

 

Entre autres, effectivement il détecte le branchement mais n'arrive à configurer aucun périphérique correctement. Ce qui me gène un peu lorsque je vois la détection, c'est que :

[ 0.978920] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

 

Ce dummy m'interpelle, mais je trouve pas bcp d'infos dessus. Maintenant, j'ai pas l'impression d'avoir vu l'USB3 passer dans le bousin, tu l'as désactivé ? T'as tenté de brancher sur différents ports (en laissant bien le temps de l'installer évidemment) ? Manifestement y'a deux types de contrôleurs différents pour l'USB sur la carte (intégrée au sb, et la fameuse puce de m...e)

Share this post


Link to post
Share on other sites

Pour le réseau, c'est un problème de power management apparemment. Un fonctionnalité qui détecte le câble et qui désactive la carte s'il n'y a pas de connexion. Le plus simple serait de la désactiver dans le bios si c'est possible, sinon et bien c'est un peu le bordel. Une solution a été trouvée ici, mais ça ressemble plus à  un coup de chance qu'à autre chose.

Tu peux essayer le module r8168 à la place, il semblerait que c'est parfois une erreur de module aussi (si c'est ça il faudra blacklisté le r8169)

 

Pour l'USB, rajouter "iommu=soft" en paramètre kernel devrait régler le problème.

Share this post


Link to post
Share on other sites

Entre autres, effectivement il détecte le branchement mais n'arrive à configurer aucun périphérique correctement. Ce qui me gène un peu lorsque je vois la détection, c'est que :

 

 

 

Ce dummy m'interpelle, mais je trouve pas bcp d'infos dessus. Maintenant, j'ai pas l'impression d'avoir vu l'USB3 passer dans le bousin, tu l'as désactivé ? T'as tenté de brancher sur différents ports (en laissant bien le temps de l'installer évidemment) ? Manifestement y'a deux types de contrôleurs différents pour l'USB sur la carte (intégrée au sb, et la fameuse puce de m...e)

 

l'USB3 est désactivé dans le bios et j'ai testé tous les ports à l'arrière du pc. Heureusement que j'avais encore un clavier PS2...

 

 

Pour le réseau, c'est un problème de power management apparemment. Un fonctionnalité qui détecte le câble et qui désactive la carte s'il n'y a pas de connexion. Le plus simple serait de la désactiver dans le bios si c'est possible, sinon et bien c'est un peu le bordel. Une solution a été trouvée ici, mais ça ressemble plus à  un coup de chance qu'à autre chose.

Tu peux essayer le module r8168 à la place, il semblerait que c'est parfois une erreur de module aussi (si c'est ça il faudra blacklisté le r8169)

 

Pour l'USB, rajouter "iommu=soft" en paramètre kernel devrait régler le problème.

 

Ce soir je vais essayer tout ça, en tout cas merci de vos conseils!

Share this post


Link to post
Share on other sites

Bonjour,

 

Je me permets un up du sujet car toujours ces problèmes... entre temps j'ai essayé les conseils de dudul88, plusieurs version d'Ubuntu bien sur et même Mint, une autre carte réseau avec un chipset complétement différent, j'ai flashé le bios, essayé tout en tas de réglages... la franchement je désespère. J'ai pensé que peut-être le problème venait de clavier / souris, donc j'ai changé aussi, j'ai aussi essayé plusieurs sources différentes pour l'installation (clefs usb, dvd, dvd rw) mais tout pareil!

 

Pour rappel il s'agit de mon dernier pc sous Windows, j'en viens à me demander si ma cm n'est pas défectueuse ou s'il ne faut pas que je change cm/proc pour passer chez Intel. Je pensais attendre la prochaine version de SteamOS, je me dis qu'il y aura peut-être une bonne prise en charge de mon matériel.

 

Je suis ouvert à tout conseils.

 

Merci d'avance.

 

ps: dernière version testé: 15.04, même comportement que la 14.04

Share this post


Link to post
Share on other sites

Bonjour,

 

Peut être tester avec une distribution qui ne soit pas basée sur Debian ? Par ex. une basée sur Arch Linux (Manjaro, Antergos, ...) ? Je ne suis pas sûr que ça change grand chose, mais bon...

Share this post


Link to post
Share on other sites

Bonjour,

 

Tu as complétement raison, j'aurais du préciser que j'ai essayé une CentOS ainsi qu'un cd live dont j'ai bouffé le nom qui sert à récupérer des données et idem.

 

 

Bonjour,

 

Peut être tester avec une distribution qui ne soit pas basée sur Debian ? Par ex. une basée sur Arch Linux (Manjaro, Antergos, ...) ? Je ne suis pas sûr que ça change grand chose, mais bon...

Share this post


Link to post
Share on other sites

En plus je viens de voir que j'ai la même CM que toi, et pour avoir testé quelques distro en dual boot, je n'ai jamais eu de soucis particulier.

Elles étaient toutes basées sur Arch par contre. Au niveau du BIOS, j'ai tout par défaut (enfin, sauf le WOL mais normalement ça ne devrait pas avoir de conséquences).

Share this post


Link to post
Share on other sites

ça me déprime lol, moi c'est simple, avec cette cm c'est un Linux = pas d'usb ni de lan

L'usb réagit au branchant / suppression mais le périphérique disparait ou des fois il ne réagit plus du tout (usb3 activé ou pas), pour le lan, la carte réseau semble bien détecté mais au final ne prend pas les réglages ou si elle les prends, ne fonctionne pas du tout.

 

 

 

En plus je viens de voir que j'ai la même CM que toi, et pour avoir testé quelques distro en dual boot, je n'ai jamais eu de soucis particulier.

Elles étaient toutes basées sur Arch par contre. Au niveau du BIOS, j'ai tout par défaut (enfin, sauf le WOL mais normalement ça ne devrait pas avoir de conséquences).

Share this post


Link to post
Share on other sites

Même problème ici : http://www.spinics.net/lists/linux-usb/msg54755.html

 

Résolu avec une mise à jour de bios... Si Gigabyte n'a pas fait l'effort de faire ça, je pense que c'est cuit. Il faudrait essayer avec un des derniers kernels pour voir :/

 

Edit : D'après ça, il faut vérifier que l'option IOMMU Controller soit bien activée dans le BIOS.

Share this post


Link to post
Share on other sites

Bonjour dudul88,

 

Merci pour toutes tes interventions sur mon sujet, j'ai mis à jour mon bios et malheureusement ça n'a rien changé. je vais surveiller les updates et peut-être demander au petit papa noël un nouveau cœur de pc en Intel :/ 

Pour ce qui est du dernier kernel, ça fait une éternité que je n'ai pas fait ça, mais ça reste quand même quelque chose à essayé avant de jeter l'éponge.

 

 

Même problème ici : http://www.spinics.net/lists/linux-usb/msg54755.html

 

Résolu avec une mise à jour de bios... Si Gigabyte n'a pas fait l'effort de faire ça, je pense que c'est cuit. Il faudrait essayer avec un des derniers kernels pour voir :/

Share this post


Link to post
Share on other sites

J'ai éditer mon post, j'avais pas vu que tu avais répondu entre temps ^^

 

Tu peux essayer la dernière fedora, elle intègre un kernel assez récent.

Share this post


Link to post
Share on other sites

ha ouais en effet, Fedora 22 a déjà le kernel 4.0!!! quel luxe :)

 

 

J'ai éditer mon post, j'avais pas vu que tu avais répondu entre temps ^^

 

Tu peux essayer la dernière fedora, elle intègre un kernel assez récent.

Share this post


Link to post
Share on other sites

C'est celui juste après le 3.19 de la ubuntu, donc rien d'exceptionnel vu qu'elle est sortie après. Honêtement je pense pas que ça change grand chose :/

 

Tu as essayer de régler le IOMMU dans le bios ?

Share this post


Link to post
Share on other sites

Salut,

 

Là comme ça je ne me souviens plus pour cette option en particulier, mais j'ai passé des heures dans le bios et à regarder sur internet à quoi correspondait tout ça.

Je refais un test ce WE et te tiens au courant.

 

 

C'est celui juste après le 3.19 de la ubuntu, donc rien d'exceptionnel vu qu'elle est sortie après. Honêtement je pense pas que ça change grand chose :/

 

Tu as essayer de régler le IOMMU dans le bios ?

Share this post


Link to post
Share on other sites

×
×
  • Create New...