Debian jessie, SSD, erreurs récurentes..

[beankylla]

Bonjour,

J'ai un petit soucis:

Sur ma config (en signature) j'ai rajouté, il y a peu de temps un SSD.

Adepte des bonnes choses j'y ai installé debian avec openbox, les catalyst etc... et tout ce qu'il faut pour faire mon bonheur ^^.

Il me reste malgré tout un soucis de taille.

Très (trop) régulièrement (jusqu'à plusieurs fois par jour), mon disque se retrouve en lecture seule...

Je pense que ca vient de mon fstab ou il est précisé qu'en cas d'erreur il faut le remonter en read only.

Cela dit c'est assez agacant. Je dois redémarrer, cela bloque au boot, je dois rentrer le mot de passe admin puis faire un fsck et ensuite redemarrer et tout est en ordre jusqu'a la prochaine erreur.

A quoi peut-etre du ce genre d'erreur?

J'ai vérifé le TRIM est activé.... (je pense que ca ne joue pas mais on sait jamais)

J'avais une ubuntu avant sur un disque non SSD et la meme config sans aucun problème.

Quelqu'un a une idée?

Merci et bonne journée!

[ragoutoutou]

A quoi peut-etre du ce genre d'erreur?

Généralement, ça trouve sa source dans une erreur d'accès disque, le disque ou le contrôleur qui renvoie une erreur lors d'une opération.

Cela peut être dû à un problème physique (mauvais câbles, alim disque, disque instable ayant des micro-coupures), mais cela peut aussi être le résultat d'un problème logiciel (problème de pilote, ...).

As-tu des erreurs concernant ton disque dans ton syslog?

[dudul88]

On peut avoir le dmesg ?

[beankylla]

alors le syslog faut-il que je l'installe ou est ce qu'il est déjà la?

et puis dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc                           version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.5-1 (2014-03-04)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=b27                          38800-dab7-481a-9269-591b15a975b8 ro quiet radeon.modeset=0
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffb7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffb8000-0x00000000bffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffedfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/M4N68T-M-LE-V2, BIOS                           0902    07/05/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000240000000 aka 9216M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff                          8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[    0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[    0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[    0.000000]  [mem 0x23fe00000-0x23fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[    0.000000]  [mem 0x23c000000-0x23fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[    0.000000]  [mem 0x200000000-0x23bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x36558000-0x372a3fff]
[    0.000000] ACPI: RSDP 00000000000fb570 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000bffa0100 00005C (v01 070511 XSDT1920 20110705                           MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bffa0290 0000F4 (v03 070511 FACP1920 20110705                           MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bffa0460 007CF5 (v01  A1704 A1704000 00000000                           INTL 20060113)
[    0.000000] ACPI: FACS 00000000bffb8000 000040
[    0.000000] ACPI: APIC 00000000bffa0390 000090 (v01 070511 APIC1920 20110705                           MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bffa0420 00003C (v01 070511 OEMMCFG  20110705                           MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bffb8040 000071 (v01 070511 OEMB1920 20110705                           MSFT 00000097)
[    0.000000] ACPI: SRAT 00000000bffa8160 000108 (v01 AMD    FAM_F_10 00000002                           AMD  00000001)
[    0.000000] ACPI: HPET 00000000bffa8270 000038 (v01 070511 OEMHPET0 20110705                           MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bffa82b0 000DA4 (v01 A M I  POWERNOW 00000001                           AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x23fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfff                          ffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x23f                          ffffff] -> [mem 0x00000000-0x23fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[    0.000000]   NODE_DATA [mem 0x23fff9000-0x23fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237600000-fff                          f88023e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009afff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x23fffffff]
[    0.000000] On node 0 totalpages: 2096954
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782240 pages, LIFO batch:31
[    0.000000]   Normal zone: 17920 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 6, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbffb7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffb8000-0xbffdffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffedfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffee000-0xbffeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_nod                          e_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s85824 r8192 d206                          72 u262144
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                          es: 2068262
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=U                          UID=b2738800-dab7-481a-9269-591b15a975b8 ro quiet radeon.modeset=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ c000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Your BIOS doesnt leave a aperture memory hole
[    0.000000] Please enable the IOMMU option in the BIOS setup
[    0.000000] This costs you 64 MB of RAM
[    0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 8116008K/8387816K available (4807K kernel code, 693K rwda                          ta, 1620K rodata, 988K init, 952K bss, 271808K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.000000] NR_IRQS:33024 nr_irqs:728 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2812.712 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer fr                          equency.. 5625.42 BogoMIPS (lpj=11250848)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000026] Security Framework initialized
[    0.000029] AppArmor: AppArmor disabled by boot time parameter
[    0.000030] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.000371] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte                          s)
[    0.002591] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003597] Mount-cache hash table entries: 256
[    0.003743] Initializing cgroup subsys memory
[    0.003748] Initializing cgroup subsys devices
[    0.003749] Initializing cgroup subsys freezer
[    0.003750] Initializing cgroup subsys blkio
[    0.003752] Initializing cgroup subsys perf_event
[    0.003770] tseg: 0000000000
[    0.003775] CPU: Physical Processor ID: 0
[    0.003776] CPU: Processor Core ID: 0
[    0.003777] mce: CPU supports 6 MCE banks
[    0.003783] LVT offset 0 assigned for vector 0xf9
[    0.003787] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.003787] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[    0.003787] tlb_flushall_shift: 4
[    0.003842] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff                          819ab000)
[    0.004411] ACPI: Core revision 20131115
[    0.006776] ACPI: All ACPI Tables successfully acquired
[    0.007798] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.047476] smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, mod                          el: 0a, stepping: 00)
[    0.153569] Performance Events: AMD PMU driver.
[    0.153572] ... version:                0
[    0.153573] ... bit width:              48
[    0.153574] ... generic registers:      4
[    0.153575] ... value mask:             0000ffffffffffff
[    0.153576] ... max period:             00007fffffffffff
[    0.153576] ... fixed-purpose events:   0
[    0.153577] ... event mask:             000000000000000f
[    0.153778] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PM                          U counter.
[    0.153851] x86: Booting SMP configuration:
[    0.153853] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.219279] x86: Booted up 1 node, 6 CPUs
[    0.219281] smpboot: Total of 6 processors activated (33752.54 BogoMIPS)
[    0.226259] devtmpfs: initialized
[    0.229727] PM: Registering ACPI NVS region [mem 0xbffb8000-0xbffdffff] (1638                          40 bytes)
[    0.229910] NET: Registered protocol family 16
[    0.229995] cpuidle: using governor ladder
[    0.229997] cpuidle: using governor menu
[    0.230000] node 0 link 0: io port [1000, ffffff]
[    0.230002] TOM: 00000000c0000000 aka 3072M
[    0.230004] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.230006] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.230009] node 0 link 0: mmio [a0000, bffff]
[    0.230010] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff]                           and [f0000000, fe0bffff]
[    0.230013] TOM2: 0000000240000000 aka 9216M
[    0.230015] bus: [bus 00-07] on node 0 link 0
[    0.230016] bus: 00 [io  0x0000-0xffff]
[    0.230017] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.230019] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.230020] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.230021] bus: 00 [mem 0x240000000-0xfcffffffff]
[    0.230075] ACPI: bus type PCI registered
[    0.230077] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.230152] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef                          ffffff] (base 0xe0000000)
[    0.230154] PCI: not using MMCONFIG
[    0.230155] PCI: Using configuration type 1 for base access
[    0.230156] PCI: Using configuration type 1 for extended access
[    0.230376] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.230377] mtrr: probably your BIOS does not setup all CPUs.
[    0.230378] mtrr: corrected configuration.
[    0.230859] bio: create slab <bio-0> at 0
[    0.230992] ACPI: Added _OSI(Module Device)
[    0.230993] ACPI: Added _OSI(Processor Device)
[    0.230995] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.230996] ACPI: Added _OSI(Processor Aggregator Device)
[    0.232597] ACPI: Executed 1 blocks of module-level executable AML code
[    0.342083] ACPI: Interpreter enabled
[    0.342093] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_                          ] (20131115/hwxface-580)
[    0.342104] ACPI: (supports S0 S1 S3 S4 S5)
[    0.342105] ACPI: Using IOAPIC for interrupt routing
[    0.342120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef                          ffffff] (base 0xe0000000)
[    0.343294] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI mot                          herboard resources
[    0.350331] PCI: Using host bridge windows from ACPI; if necessary, use "pci=                          nocrs" and report a bug
[    0.350405] ACPI: No dock devices found.
[    0.355468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.355473] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S                          egments MSI]
[    0.355594] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCI                          eCapability]
[    0.355649] acpi PNP0A03:00: _OSC: not requesting control; platform does not                           support [PCIeCapability]
[    0.355651] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapa                          bility]
[    0.355652] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[    0.355654] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.355843] PCI host bridge to bus 0000:00
[    0.355845] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.355847] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.355848] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.355850] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.355851] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.355853] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.355854] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.355872] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[    0.356074] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[    0.356080] pci 0000:00:01.0: reg 0x10: [io  0x0900-0x09ff]
[    0.356144] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.356154] pci 0000:00:01.1: reg 0x10: [io  0x0e00-0x0e3f]
[    0.356167] pci 0000:00:01.1: reg 0x20: [io  0x0600-0x063f]
[    0.356171] pci 0000:00:01.1: reg 0x24: [io  0x0700-0x073f]
[    0.356197] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.356223] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.356246] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.356304] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.356312] pci 0000:00:02.0: reg 0x10: [mem 0xdfefb000-0xdfefbfff]
[    0.356341] pci 0000:00:02.0: supports D1 D2
[    0.356342] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356363] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.356387] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.356396] pci 0000:00:02.1: reg 0x10: [mem 0xdfefac00-0xdfefacff]
[    0.356432] pci 0000:00:02.1: supports D1 D2
[    0.356433] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356456] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.356483] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.356526] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.356551] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.356560] pci 0000:00:05.0: reg 0x10: [mem 0xdfef4000-0xdfef7fff]
[    0.356596] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.356618] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.356647] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.356665] pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.356721] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.356729] pci 0000:00:07.0: reg 0x10: [mem 0xdfef9000-0xdfef9fff]
[    0.356732] pci 0000:00:07.0: reg 0x14: [io  0xd480-0xd487]
[    0.356762] pci 0000:00:07.0: supports D1 D2
[    0.356763] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.356787] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.356810] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.356816] pci 0000:00:08.0: reg 0x10: [io  0xd400-0xd407]
[    0.356820] pci 0000:00:08.0: reg 0x14: [io  0xd080-0xd083]
[    0.356823] pci 0000:00:08.0: reg 0x18: [io  0xd000-0xd007]
[    0.356826] pci 0000:00:08.0: reg 0x1c: [io  0xcc00-0xcc03]
[    0.356829] pci 0000:00:08.0: reg 0x20: [io  0xc880-0xc88f]
[    0.356833] pci 0000:00:08.0: reg 0x24: [mem 0xdfef8000-0xdfef8fff]
[    0.356884] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.356890] pci 0000:00:08.1: reg 0x10: [io  0xc800-0xc807]
[    0.356893] pci 0000:00:08.1: reg 0x14: [io  0xc480-0xc483]
[    0.356897] pci 0000:00:08.1: reg 0x18: [io  0xc400-0xc407]
[    0.356900] pci 0000:00:08.1: reg 0x1c: [io  0xc080-0xc083]
[    0.356903] pci 0000:00:08.1: reg 0x20: [io  0xc000-0xc00f]
[    0.356906] pci 0000:00:08.1: reg 0x24: [mem 0xdfeef000-0xdfeeffff]
[    0.356964] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.356985] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.357008] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.357032] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.357051] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.357076] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.357098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.357118] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.357139] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.357169] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.357210] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.357247] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.357284] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.357323] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.357410] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.357414] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractiv                          e decode)
[    0.357415] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractiv                          e decode)
[    0.357417] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (su                          btractive decode)
[    0.357418] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (su                          btractive decode)
[    0.357419] pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xdfffffff] (su                          btractive decode)
[    0.357421] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (su                          btractive decode)
[    0.357451] pci 0000:02:00.0: [1002:6738] type 00 class 0x030000
[    0.357462] pci 0000:02:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref                          ]
[    0.357471] pci 0000:02:00.0: reg 0x18: [mem 0xdffe0000-0xdfffffff 64bit]
[    0.357477] pci 0000:02:00.0: reg 0x20: [io  0xe800-0xe8ff]
[    0.357487] pci 0000:02:00.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
[    0.357514] pci 0000:02:00.0: supports D1 D2
[    0.357549] pci 0000:02:00.1: [1002:aa88] type 00 class 0x040300
[    0.357560] pci 0000:02:00.1: reg 0x10: [mem 0xdffbc000-0xdffbffff 64bit]
[    0.357609] pci 0000:02:00.1: supports D1 D2
[    0.365557] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.365562] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.365564] pci 0000:00:09.0:   bridge window [mem 0xdff00000-0xdfffffff]
[    0.365567] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bi                          t pref]
[    0.365604] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.365632] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.366197] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.366272] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.366344] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.366415] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.366487] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
[    0.366559] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.366630] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.366703] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[    0.366775] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.366847] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.366919] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[    0.366992] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.367062] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.367135] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.367205] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.367278] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[    0.367350] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.367429] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.367489] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.367493] ACPI: \_SB_.PCI0: notify handler is installed
[    0.367514] Found 1 acpi root devices
[    0.367588] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem                          ,locks=none
[    0.367589] vgaarb: loaded
[    0.367590] vgaarb: bridge control possible 0000:02:00.0
[    0.367618] PCI: Using ACPI for IRQ routing
[    0.373483] PCI: pci_cache_line_size set to 64 bytes
[    0.373510] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
[    0.373512] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[    0.373588] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.373594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.373596] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.375967] Switched to clocksource hpet
[    0.377329] pnp: PnP ACPI init
[    0.377339] ACPI: bus type PNP registered
[    0.377374] pnp 00:00: [dma 4]
[    0.377392] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.377421] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.377440] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.377464] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.377955] pnp 00:04: [dma 0 disabled]
[    0.378106] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.378410] pnp 00:05: disabling [io  0x0900-0x097f] because it overlaps 0000                          :00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.378412] pnp 00:05: disabling [io  0x0980-0x09ff] because it overlaps 0000                          :00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.378452] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.378454] system 00:05: [io  0x0800-0x080f] has been reserved
[    0.378455] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.378457] system 00:05: [io  0x0580-0x05ff] has been reserved
[    0.378458] system 00:05: [io  0x0800-0x087f] could not be reserved
[    0.378460] system 00:05: [io  0x0880-0x08ff] has been reserved
[    0.378461] system 00:05: [io  0x0d00-0x0d7f] has been reserved
[    0.378463] system 00:05: [io  0x0d80-0x0dff] has been reserved
[    0.378465] system 00:05: [io  0x1100-0x117f] has been reserved
[    0.378466] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.378469] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserve                          d
[    0.378471] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserve                          d
[    0.378472] system 00:05: [mem 0x000de000-0x000dffff window] has been reserve                          d
[    0.378474] system 00:05: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.378476] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.378477] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.378479] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.378481] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.378540] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.378598] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.378600] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.378602] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.378747] system 00:08: [io  0x0230-0x023f] has been reserved
[    0.378749] system 00:08: [io  0x0290-0x029f] has been reserved
[    0.378750] system 00:08: [io  0x0a00-0x0a0f] has been reserved
[    0.378752] system 00:08: [io  0x0a30-0x0a3f] has been reserved
[    0.378753] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.379072] pnp 00:09: [dma 0 disabled]
[    0.379124] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.379167] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.379169] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.379275] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.379277] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.379278] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.379280] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.379281] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.379283] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.379465] pnp: PnP ACPI: found 12 devices
[    0.379466] ACPI: bus type PNP unregistered
[    0.385568] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.385574] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.385576] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.385578] pci 0000:00:09.0:   bridge window [mem 0xdff00000-0xdfffffff]
[    0.385580] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bi                          t pref]
[    0.385582] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.385585] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.385589] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.385590] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.385592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.385593] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.385594] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.385596] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.385597] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.385598] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.385600] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.385601] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.385602] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.385603] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.385605] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.385606] pci_bus 0000:02: resource 1 [mem 0xdff00000-0xdfffffff]
[    0.385608] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref                          ]
[    0.385713] NET: Registered protocol family 2
[    0.385888] TCP established hash table entries: 65536 (order: 7, 524288 bytes                          )
[    0.386062] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.386307] TCP: Hash tables configured (established 65536 bind 65536)
[    0.386350] TCP: reno registered
[    0.386359] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.386405] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.386559] NET: Registered protocol family 1
[    0.386797] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.964120] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.964213] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964256] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964308] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964407] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964460] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964516] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964576] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.964586] pci 0000:02:00.0: Boot video device
[    0.964589] PCI: CLS 64 bytes, default 64
[    0.964628] Unpacking initramfs...
[    1.156810] Freeing initrd memory: 13616K (ffff880036558000 - ffff8800372a400                          0)
[    1.156968] PCI-DMA: Disabling AGP.
[    1.157882] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.157883] PCI-DMA: using GART IOMMU.
[    1.157885] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.161123] LVT offset 1 assigned for vector 0x400
[    1.161131] IBS: LVT offset 1 assigned
[    1.161158] perf: AMD IBS detected (0x0000001f)
[    1.161191] microcode: CPU0: patch_level=0x010000bf
[    1.161199] microcode: CPU1: patch_level=0x010000bf
[    1.161209] microcode: CPU2: patch_level=0x010000bf
[    1.161218] microcode: CPU3: patch_level=0x010000bf
[    1.161228] microcode: CPU4: patch_level=0x010000bf
[    1.161238] microcode: CPU5: patch_level=0x010000bf
[    1.161322] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.                          co.uk>, Peter Oruba
[    1.161596] audit: initializing netlink socket (disabled)
[    1.161610] type=2000 audit(1396376497.052:1): initialized
[    1.170744] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.171396] VFS: Disk quotas dquot_6.5.2
[    1.171422] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.171492] msgmni has been set to 16007
[    1.171753] alg: No test for stdrng (krng)
[    1.171793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                          52)
[    1.171831] io scheduler noop registered
[    1.171832] io scheduler deadline registered
[    1.171863] io scheduler cfq registered (default)
[    1.171932] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[    1.171969] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[    1.172003] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[    1.172045] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.172057] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.172109] GHES: HEST is not enabled!
[    1.172169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.192508] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655                          0A
[    1.192812] Linux agpgart interface v0.103
[    1.192873] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.193302] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.193309] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.193438] mousedev: PS/2 mouse device common for all mice
[    1.193483] rtc_cmos 00:01: RTC can wake from S4
[    1.193644] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.193682] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet                           irqs
[    1.193691] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.193692] AMD IOMMUv2 functionality not available on this system
[    1.193814] TCP: cubic registered
[    1.193876] NET: Registered protocol family 10
[    1.194034] mip6: Mobile IPv6
[    1.194036] NET: Registered protocol family 17
[    1.194039] mpls_gso: MPLS GSO support
[    1.194324] registered taskstats version 1
[    1.194997] rtc_cmos 00:01: setting system clock to 2014-04-01 18:21:37 UTC (                          1396376497)
[    1.195024] PM: Hibernation image not present or could not be loaded.
[    1.195715] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff81                          9a6000)
[    1.195716] Write protecting the kernel read-only data: 8192k
[    1.198476] Freeing unused kernel memory: 1328K (ffff8800014b4000 - ffff88000                          1600000)
[    1.199410] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001                          800000)
[    1.207570] systemd-udevd[80]: starting version 204
[    1.217222] ACPI: bus type USB registered
[    1.217261] usbcore: registered new interface driver usbfs
[    1.217272] usbcore: registered new interface driver hub
[    1.218834] usbcore: registered new device driver usb
[    1.219140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.219321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.219423] ehci-pci: EHCI PCI platform driver
[    1.219467] ohci-pci: OHCI PCI platform driver
[    1.219551] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.219558] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus numbe                          r 1
[    1.219569] ehci-pci 0000:00:02.1: debug port 1
[    1.219588] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.219611] ehci-pci 0000:00:02.1: irq 22, io mem 0xdfefac00
[    1.220004] SCSI subsystem initialized
[    1.222694] libata version 3.00 loaded.
[    1.227973] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.228029] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.228031] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=                          1
[    1.228033] usb usb1: Product: EHCI Host Controller
[    1.228034] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
[    1.228035] usb usb1: SerialNumber: 0000:00:02.1
[    1.228206] hub 1-0:1.0: USB hub found
[    1.228220] hub 1-0:1.0: 10 ports detected
[    1.228670] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.228677] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus numbe                          r 2
[    1.228705] ohci-pci 0000:00:02.0: irq 23, io mem 0xdfefb000
[    1.286067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.286071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=                          1
[    1.286073] usb usb2: Product: OHCI PCI host controller
[    1.286074] usb usb2: Manufacturer: Linux 3.13-1-amd64 ohci_hcd
[    1.286075] usb usb2: SerialNumber: 0000:00:02.0
[    1.286197] hub 2-0:1.0: USB hub found
[    1.286220] hub 2-0:1.0: 10 ports detected
[    1.286517] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.6                          4.
[    1.286727] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    1.348820] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 14:d                          a:e9:6e:2c:90
[    1.348824] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-                          v3
[    1.348890] sata_nv 0000:00:08.0: version 3.5
[    1.349076] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.349376] scsi0 : sata_nv
[    1.349460] scsi1 : sata_nv
[    1.349490] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
[    1.349492] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
[    1.349652] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[    1.349863] scsi2 : sata_nv
[    1.349917] scsi3 : sata_nv
[    1.349944] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
[    1.349945] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
[    1.349972] pata_amd 0000:00:06.0: version 0.4.1
[    1.350481] scsi4 : pata_amd
[    1.350548] scsi5 : pata_amd
[    1.350577] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.350578] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.595832] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    1.729686] usb 1-5: New USB device found, idVendor=8564, idProduct=1000
[    1.729689] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.729690] usb 1-5: Product: Mass Storage Device
[    1.729691] usb 1-5: Manufacturer: JetFlash
[    1.729692] usb 1-5: SerialNumber: 45U94S0Z8J6PTHC9
[    1.731461] usb-storage 1-5:1.0: USB Mass Storage device detected
[    1.731531] scsi6 : usb-storage 1-5:1.0
[    1.731573] usbcore: registered new interface driver usb-storage
[    1.815815] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.815819] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.823979] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133
[    1.823982] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.824049] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[    1.824052] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.831985] ata1.00: configured for UDMA/133
[    1.832014] ata3.00: configured for UDMA/133
[    1.847919] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  EXT0 PQ                          : 0 ANSI: 5
[    1.850899] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232                           GiB)
[    1.851068] sd 0:0:0:0: [sda] Write Protect is off
[    1.851072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.851108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                          n't support DPO or FUA
[    1.851620]  sda: sda1 sda2 sda3
[    1.852061] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.895820] usb 1-8: new high-speed USB device number 5 using ehci-pci
[    2.159738] tsc: Refined TSC clocksource calibration: 2812.791 MHz
[    2.169976] ata2: SATA link down (SStatus 0 SControl 300)
[    2.170148] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD154UI  1AG0 PQ                          : 0 ANSI: 5
[    2.170282] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.                          36 TiB)
[    2.170392] sd 2:0:0:0: [sdb] Write Protect is off
[    2.170396] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.170428] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                          n't support DPO or FUA
[    2.178368] usb 1-8: New USB device found, idVendor=048d, idProduct=1345
[    2.178371] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.178372] usb 1-8: Product: Mass Storage Device
[    2.178373] usb 1-8: Manufacturer: Generic 
[    2.178374] usb 1-8: SerialNumber: 0000000000000006
[    2.178528] usb-storage 1-8:1.0: USB Mass Storage device detected
[    2.178590] scsi7 : usb-storage 1-8:1.0
[    2.192051]  sdb: sdb1 sdb2 < sdb5 > sdb3 sdb4
[    2.192523] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.489931] ata4: SATA link down (SStatus 0 SControl 300)
[    2.490050] ata6: port disabled--ignoring
[    2.491868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.491911] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.607700] usb 2-1: new low-speed USB device number 2 using ohci-pci
[    2.728318] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 32GB   1100 PQ                          : 0 ANSI: 4
[    2.728570] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.729184] sd 6:0:0:0: [sdc] 63393792 512-byte logical blocks: (32.4 GB/30.2                           GiB)
[    2.729941] sd 6:0:0:0: [sdc] Write Protect is off
[    2.729944] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    2.730696] sd 6:0:0:0: [sdc] No Caching mode page found
[    2.730733] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.733821] sd 6:0:0:0: [sdc] No Caching mode page found
[    2.733857] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.734575]  sdc: sdc1
[    2.737327] sd 6:0:0:0: [sdc] No Caching mode page found
[    2.737363] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.737398] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    2.824664] usb 2-1: New USB device found, idVendor=03f0, idProduct=0024
[    2.824670] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.824672] usb 2-1: Product: HP Basic USB Keyboard
[    2.824673] usb 2-1: Manufacturer: CHICONY
[    2.829213] hidraw: raw HID events driver (C) Jiri Kosina
[    2.836792] usbcore: registered new interface driver usbhid
[    2.836794] usbhid: USB HID core driver
[    2.838188] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:                          00:02.0/usb2/2-1/2-1:1.0/input/input2
[    2.838238] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Key                          board [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-1/input0
[    2.941616] PM: Starting manual resume from disk
[    2.941618] PM: Hibernation image partition 8:17 present
[    2.941619] PM: Looking for hibernation image.
[    2.941770] PM: Image not found (code -22)
[    2.941771] PM: Hibernation image not present or could not be loaded.
[    2.951134] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:                           (null)
[    3.131620] usb 2-6: new low-speed USB device number 3 using ohci-pci
[    3.159682] Switched to clocksource tsc
[    3.176267] scsi 7:0:0:0: Direct-Access     Generic  Compact Flash    0.00 PQ                          : 0 ANSI: 2
[    3.176747] scsi 7:0:0:1: Direct-Access     Generic  xD-Picture       0.00 PQ                          : 0 ANSI: 2
[    3.177245] scsi 7:0:0:2: Direct-Access     Generic  SDXC/MMC         0.00 PQ                          : 0 ANSI: 2
[    3.177746] scsi 7:0:0:3: Direct-Access     Generic  MS/MS-Pro/HG     0.00 PQ                          : 0 ANSI: 2
[    3.177963] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    3.178080] sd 7:0:0:1: Attached scsi generic sg4 type 0
[    3.178169] sd 7:0:0:2: Attached scsi generic sg5 type 0
[    3.178265] sd 7:0:0:3: Attached scsi generic sg6 type 0
[    3.183502] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[    3.184135] sd 7:0:0:1: [sde] Attached SCSI removable disk
[    3.184749] sd 7:0:0:2: [sdf] Attached SCSI removable disk
[    3.185373] sd 7:0:0:3: [sdg] Attached SCSI removable disk
[    3.345591] usb 2-6: New USB device found, idVendor=045e, idProduct=0040
[    3.345595] usb 2-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    3.345597] usb 2-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[    3.345599] usb 2-6: Manufacturer: Microsoft
[    3.355820] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as                           /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/input/input3
[    3.355880] systemd-udevd[400]: starting version 204
[    3.355897] hid-generic 0003:045E:0040.0002: input,hidraw1: USB HID v1.10 Mou                          se [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-                          6/input0
[    3.477989] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/                          input/input4
[    3.478228] ACPI: Power Button [PWRB]
[    3.478275] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp                          ut5
[    3.478316] ACPI: Power Button [PWRF]
[    3.483253] ACPI: acpi_idle registered with cpuidle
[    3.488725] EDAC MC: Ver: 3.0.0
[    3.500349] parport_pc 00:04: reported by Plug and Play ACPI
[    3.500393] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.509043] random: nonblocking pool is initialized
[    3.509055] MCE: In-kernel MCE decoding enabled.
[    3.510176] ACPI Warning: 0x0000000000000600-0x000000000000063f SystemIO conf                          licts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20131115/utaddress-251)
[    3.510181] ACPI: If an ACPI driver is available for this device, you should                           use it instead of the native driver
[    3.510206] i2c i2c-0: nForce2 SMBus adapter at 0x700
[    3.510780] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.512020] AMD64 EDAC driver v3.4.0
[    3.512049] EDAC amd64: DRAM ECC disabled.
[    3.512060] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module                           will not load.
[    3.512060]  Either enable ECC checking or force module loading by setting 'e                          cc_enable_override'.
[    3.512060]  (Note that use of the override may cause unknown side effects.)
[    3.515951] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.552126] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[    3.552137] hda_intel: Disabling MSI
[    3.552899] kvm: Nested Virtualization enabled
[    3.552905] kvm: Nested Paging enabled
[    3.605509] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,                           Starnberg, GERMANY' taints kernel.
[    3.605514] Disabling lock debugging due to kernel taint
[    3.618928] <6>[fglrx] Maximum main memory to use for locked dma buffers: 777                          3 MBytes.
[    3.619045] <6>[fglrx]   vendor: 1002 device: 6738 count: 1
[    3.619293] <6>[fglrx] ioport: bar 4, base 0xe800, size: 0x100
[    3.619471] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[    3.619679] <6>[fglrx] Kernel PAT support is enabled
[    3.619695] <6>[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 min                          ors
[    4.815627] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:                          05.0/sound/card0/input12
[    4.815828] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/so                          und/card0/input11
[    4.815972] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/                          card0/input10
[    4.816115] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/s                          ound/card0/input9
[    4.816286] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/so                          und/card0/input8
[    4.817345] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[    4.817389] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    4.817456] snd_hda_intel 0000:02:00.1: irq 43 for MSI/MSI-X
[    4.826362] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:                          09.0/0000:02:00.1/sound/card1/input13
[    5.221856] Adding 8388604k swap on /dev/sdb1.  Priority:-1 extents:1 across:                          8388604k 
[    5.250765] EXT4-fs (sda2): re-mounted. Opts: (null)
[    5.338048] EXT4-fs (sda2): re-mounted. Opts: discard,errors=remount-ro
[    5.588788] fuse init (API version 7.22)
[    6.319333] EXT4-fs (sdb5): Unrecognized mount option "0" or missing value
[    6.644312] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[    6.644375] forcedeth 0000:00:07.0 eth0: MSI enabled
[    6.783774] RPC: Registered named UNIX socket transport module.
[    6.783777] RPC: Registered udp transport module.
[    6.783778] RPC: Registered tcp transport module.
[    6.783780] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.787094] FS-Cache: Loaded
[    6.793697] FS-Cache: Netfs 'nfs' registered for caching
[    6.802309] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    6.829712] Key type dns_resolver registered
[    6.836948] NFS: Registering the id_resolver key type
[    6.836960] Key type id_resolver registered
[    6.836963] Key type id_legacy registered
[    6.991401] IPv6: eth0: IPv6 duplicate address fe80::16da:e9ff:fe6e:2c90 dete                          cted!
[    7.188560] vboxdrv: Found 6 processor cores.
[    7.188787] vboxdrv: fAsync=0 offMin=0x416 offMax=0x2ae0
[    7.188851] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'                          .
[    7.188853] vboxdrv: Successfully loaded version 4.3.6_Debian (interface 0x00                          1a0007).
[    7.205744] vboxpci: IOMMU not found (not registered)
[    7.629746] fglrx_pci 0000:02:00.0: irq 45 for MSI/MSI-X
[    7.632582] <6>[fglrx] Firegl kernel thread PID: 2404
[    7.632816] <6>[fglrx] Firegl kernel thread PID: 2405
[    7.633056] <6>[fglrx] Firegl kernel thread PID: 2406
[    7.633331] <6>[fglrx] IRQ 45 Enabled
[    7.723337] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[    7.723348] <6>[fglrx] Reserved FB block: Unshared offset:fb78000, size:4000 
[    7.723354] <6>[fglrx] Reserved FB block: Unshared offset:fb7c000, size:48400                          0 
[    7.723359] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000                           
[ 1197.936075] usb 1-8: USB disconnect, device number 5
[ 1198.211591] usb 1-8: new high-speed USB device number 6 using ehci-pci
[ 1198.494340] usb 1-8: New USB device found, idVendor=048d, idProduct=1345
[ 1198.494352] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1198.494359] usb 1-8: Product: Mass Storage Device
[ 1198.494365] usb 1-8: Manufacturer: Generic 
[ 1198.494370] usb 1-8: SerialNumber: 0000000000000006
[ 1198.494789] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 1198.494972] scsi8 : usb-storage 1-8:1.0
[ 1199.492264] scsi 8:0:0:0: Direct-Access     Generic  Compact Flash    0.00 PQ                          : 0 ANSI: 2
[ 1199.492876] scsi 8:0:0:1: Direct-Access     Generic  xD-Picture       0.00 PQ                          : 0 ANSI: 2
[ 1199.493502] scsi 8:0:0:2: Direct-Access     Generic  SDXC/MMC         0.00 PQ                          : 0 ANSI: 2
[ 1199.494126] scsi 8:0:0:3: Direct-Access     Generic  MS/MS-Pro/HG     0.00 PQ                          : 0 ANSI: 2
[ 1199.494731] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 1199.495220] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 1199.497469] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 1199.498286] sd 8:0:0:3: Attached scsi generic sg6 type 0
[ 1199.502087] sd 8:0:0:2: [sdf] Attached SCSI removable disk
[ 1199.502699] sd 8:0:0:1: [sde] Attached SCSI removable disk
[ 1199.509113] sd 8:0:0:3: [sdg] Attached SCSI removable disk
[ 1199.509874] sd 8:0:0:0: [sdd] Attached SCSI removable disk

[dudul88]

Ouai bon, là il n'y a rien de bien probant. C'est possible d'avoir un dmesg après que le disque ai été remonté en read only ? Et le contenu de fstab ? Au besoin tu dois pouvoir remonter ton SSD avec un truc du genre :

mount /dev/sda2 -o remount,rw

[beankylla]

Le fstab donne ca:

# /etc/fstab: static file system information.## Use 'blkid' to print the universally unique identifier for a# device; this may be used with UUID= as a more robust way to name devices# that works even if disks are added and removed. See fstab(5).## <file system> <mount point>   <type>  <options>       <dump>  <pass># / was on /dev/sda2 during installationUUID=b2738800-dab7-481a-9269-591b15a975b8 /               ext4    discard,noatime,nodiratime,errors=remount-ro 0       1#other partitions# <file system> <mount point>   <type>  <options>       <dump>  <pass>/dev/sda1		/mnt/win/		auto	0	0/dev/sda3		/mnt/data/		auto  	0	0	/dev/sdb4 		/mnt/tera/		auto	0	0/dev/sdb5		/mnt/ubu/		auto 	0	0# swap was on /dev/sdb1 during installationUUID=488d2103-4e7e-4a66-ab82-b9ca181e195f none            swap    sw              0       0#nfs partitions (nas)192.168.1.14:/nfs/Torrents  /nfs/Torrents/   nfs      rw,sync,hard,intr  0     0192.168.1.14:/nfs/Music  /nfs/Music/   nfs      rw,sync,hard,intr  0     0192.168.1.14:/nfs/Roomies  /nfs/Roomies/   nfs      rw,sync,hard,intr  0     0/dev/sdc1       /media/usb0     auto    rw,user,noauto  0       0/dev/sdc2       /media/usb1     auto    rw,user,noauto  0       0

je vais essayer de faire le dmesg après que le disque ait été remonté en ro...

Je veux dire je comprends le RO si il y a une erreur, ce que je me demande c'est d'ou vient l'erreur...

[dudul88]

Essaye de supprimer le discard pour voir. En principe l'erreur apparaît dans le dmesg.

Edit : d'après le wiki Archlinux, c'est bien cette option qui pose problème avec la partition root. Mieux vaut la supprimer et exécuter fstrim de temps en temps (avec par exemple une tâche cron).

[beankylla]

alors j'ai supprimé le discard mais après avoir booté... jusqu'ici aucune erreur... bizarre bizarre

[dudul88]

Si tu n'as pas fait de remount c'est étrange en effet...

[beankylla]

Bonbonbon... depuis que j'ai enlevé le discard je n'ai plus jamais vu le problème donc merci!!

[dudul88]

Juste un truc : il faut penser à lancer fstrim de temps en temps, histoire de ne pas voir la vitesse d'écriture chuter avec le temps.