Aller au contenu

Windows 8 - Ecran bleu après chargement Windows, réparation impossible

PinoTM

Par PinoTM
dans Ordinateurs portables

Messages recommandés

PinoTM Débutant

PinoTM

Posté(e)
Posté(e)

Bonsoir à tous.

Je possède un PC Acer Timeline X 5830 TG, sous Windows 8 Pro avec un i5, et 8Gb de RAM, ainsi qu'un SSD OCZ Vertex 3 qui fonctionnait à merveille jusqu'à ce soir.

En allumant mon PC j'ai eu un chargement de Windows très long (plusieurs minutes) suivi d'un écran bleu tellement rapide que je n'ai pas eu le temps de lire.

Le PC à redémarre en mode "diagnostic système". J'ai choisi l'option Outils Avancés pour voir la liste des propositions, puis écran noir pendants quelques minutes, et encore un écran Bleu.

Maintenant, lorsque je démarre l'ordinateur, il alterne entre démarrage normal suivi d'un écran bleu, et démarrage "diagnostic et réparation" suivi d'un écran bleu également, et je n'ai plus accès a aucune option.

J'ai essayé de booter sur un DVD d'install et une Clé USB d'install mais j'ai aussi des écrans bleus.

Par contre je peux booter sur un live CD Ubuntu 11.04

J'ai essayé en enlevant une barrette de RAM (j'ai testé les 2, une après l'autre, et en changeant d'emplacement), et j'ai également un écran bleu.

Je ne sais vraiment pas quoi faire je ne comprend pas d'où vient le problème, :craint:

si quelqu'un à une solution je lui en serai très reconnaissant.

Merci d'avance

EDIT : lorsque j’enlève mon SSD du PC et que je boot sur ma clé d'install j'accède à l'option "Réparer l'ordinateur". Le problème viendrait donc de mon install sur le SSD ou de mon SSD lui même...

Lien vers le commentaire
Partager sur d’autres sites
PinoTM Débutant

PinoTM

Posté(e)
  • Auteur
Posté(e)

Alors j'ai téléchargé l'utilitaire OCZ Toolbox,il n'y a pas d'options pour lancer un diagnostic, par contre on peut afficher les données S.M.A.R.T. que voici :

SMART.png

Il y avait aussi une option Identify Data :

<IDENTIFY DEVICE DATA>

Note: All references are to ACS-2 Specification

Legend: F/V/X - Fixed/variable/undefined Content

(O)/(M) - Mandatory/optional requirement

Word 00: (M) 0c5ah General configuration

F 0b 15 0 = ATA device

X 0001100b 14:8 Retired

F 01b 7:6 Obsolete

X 011b 5:3 Retired

V 0b 2 Response incomplete

X 1b 1 Retired

0b 0 Reserved

Word 01: 3fffh Obsolete

Word 02: (O) c837h Specific configuration

Word 03: (X) 0010h Obsolete

Word 04: (X) 0000h 0000h Retired

Word 06: (X) 003fh Obsolete

Word 07: 0000h 0000h Reserved for assignment by the CompactFlashTM Association

Word 09: (X) 0000h Retired

Word 10: (M) Serial number (20 ASCII characters)

F 4f43h 5a2dh 3350h 3038h 3733h 4346h 3343h 3637h 5244h 5853h

OCZ-3P0873CF3C67RDXS

Word 20: X 0000h 0000h Retired

Word 22: X 0004h Obsolete

Word 23: (M) Firmware revision (8 ASCII characters)

F 322eh 3232h 2020h 2020h

2.22

Word 27: (M) Model number (40 ASCII characters)

F 4f43h 5a2dh 5645h 5254h 4558h 3320h 2020h 2020h 2020h 2020h

2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h

OCZ-VERTEX3

Word 47: (M) 8010h

F 15:8 80h

F 7:0 00h = Reserved

01h-FFh = Maximum number of logical sectors that shall be transferred per DRQ data block on READ/WRITE MULTIPLE commands

Word 48: (0) 4000h Trusted Computing feature set options

F 15 Shall be cleared to zero

F 14 Shall be set to zero

13:1 Reserved for the Trusted Computing Group

F 0 1=Trusted Computing feature set is supported

Word 49: (M) 2f00h Capabilities

F 15:14 Reserved for the IDENTIFY PACKET DEVICE command.

F 1b 13 1 = Standby timer values as specified in this standard are supported

0 = Standby timer values shall be managed by the device

F 0b 12 Reserved for the IDENTIFY PACKET DEVICE command.

F 1b 11 1 = IORDY supported

0 = IORDY may be supported

F 1b 10 1 = IORDY may be disabled

F 1b 9 1 = LBA supported

F 1b 8 1 = DMA supported

X 00000000b 7:0 Retired

Word 50: (M) 4000 Capabilities

F 0b 15 Shall be cleared to zero.

F 1b 14 Shall be set to one.

F 000000000000b 13:2 Reserved.

X 0b 1 Obsolete

F 0b 0 Shall be set to one to indicate a device specific Standby timer value

Word 51: X 0200h 0200h Obsolete

Word 53: (M) 0007h

F 0000000000000b 15:3 Reserved

F 1b 2 1 = the fields reported in word 88 are valid

0 = the fields reported in word 88 are not valid

F 1b 1 1 = the fields reported in words (70:64) are valid

0 = the fields reported in words (70:64) are not valid

X 1b 0 Obsolete

Word 54: Obsolete

X 3fffh 0010h 003fh fc10h

Word 59: (M) 0110h

F 0000000b 15:9 Reserved

V 1b 8 1 = Multiple sector setting is valid

V 10h 7:0 xxh = Current setting for number of logical sectors that shall be transferred per DRQ data block on READ/WRITE Multiple commands

Word 60: (M) 4bb0h 0df9h Total number of user addressable logical sectors (DWord)

Word 62: X 0000h Obsolete

Word 63: (M) 0007h

F 00000b 15-11 Reserved

V 0b 10 1 = Multiword DMA mode 2 is selected

0 = Multiword DMA mode 2 is not selected

V 0b 9 1 = Multiword DMA mode 1 is selected

0 = Multiword DMA mode 1 is not selected

V 0b 8 1 = Multiword DMA mode 0 is selected

0 = Multiword DMA mode 0 is not selected

F 00000b 7:3 Reserved

F 1b 2 1 = Multiword DMA mode 2 and below are supported

F 1b 1 1 = Multiword DMA mode 1 and below are supported

F 1b 0 1 = Multiword DMA mode 0 is supported

Word 64: (M) 0003h

F 15:8 Reserved

F 7:0 PIO modes supported

Word 65: (M) 0078h Minimum Multiword DMA transfer cycle time per word

F 15:0 Cycle time in nanoseconds

Word 66: (M) 0078h Manufacturer's recommended Multiword DMA cycle time

F 15:0 Cycle time in nanoseconds

Word 67: (M) 0078h Minimum PIO transfer cycle time without flow control

F 15:0 Cycle time in nanoseconds

Word 68: (M) 0078h Minimum PIO transfer cycle time with IORDY flow control

F 15:0 Cycle time in nanoseconds

Word 69: (O) 4200h Additional Supported

F 0b 15 1 = CFast Specification Support

F 1b 14 1 = Deterministic read after TRIM is supported

F 0b 13 1 = Long Physical Sector Alignment Error Reporting Control is supported

F 0b 12 1 = DEVICE CONFIGURATION IDENTIFY DMA and

DEVICE CONFIGURATION SET DMA are supported

F 0b 11 1 = READ BUFFER DMA is supported

F 0b 10 1 = WRITE BUFFER DMA is supported

F 1b 9 1 = SET MAX SET PASSWORD DMA and

SET MAX UNLOCK DMA are supported

F 0b 8 1 = DOWNLOAD MICROCODE DMA is supported

F 00000000b 7:0 Reserved

Word 70: X 0000h Reserved

Word 71: Reserved for IDENTIFY PACKET DEVICE command.

0000h 0000h 0000h 0000h

Word 75: (O) 001fh Queue depth

00000000000b 15:5 Reserved

F 11111b 4:0 Maximum queue depth - 1

Word 76: (O) c70eh Serial ATA capabilities

110b 15:13 Reserved

F 0b 12 Supports Native Command Queuing priority information

F 0b 11 Supports Unload while NCQ commands outstanding

F 1b 10 Supports Phy event counters

F 1b 9 Supports receipt of host initiated power management requests

F 1b 8 Supports native command queuing

0000b 7:4 Reserved for Serial ATA

F 1b 3 1 = Supports Serial ATA Gen-3 speed (6.0Gbps)

F 1b 2 1 = Supports Serial ATA Gen-2 speed (3.0Gbps)

F 1b 1 1 = Supports Serial ATA Gen-1 speed (1.5Gbps)

F 0b 0 Shall be cleared to zero

Word 77: 0004h Reserved for Serial ATA future definition

Word 78: (O) 004ch Serial ATA features supported

000000000b 15:7 Reserved

F 1b 6 1 = supports software settings preservation

F 0b 5 1 = supports Asynchronous notification

F 0b 4 1 = supports in-order data delivery

F 1b 3 1 = supports dev initiate interface power management

F 1b 2 1 = supports DMA Setup Auto-Activate optimization

F 0b 1 1 = supports non-zero buffer offsets in DMA Setup FIS

F 0b 0 Reserved (set to 0)

Word 79: (0) 0040h Serial ATA features enabled

000000000b 15:7 Reserved

V 1b 6 1 = software settings preservation enabled

V 0b 5 1 = Asynchronous notification enabled

V 0b 4 1 = in-order data delivery enabled

V 0b 3 1 = device initiating interface power management enabled

V 0b 2 1 = DMA Setup Auto-Activate optimization enabled

V 0b 1 1 = non-zero buffer offsets in DMA Setup FIS enabled

F 0b 0 Reserved (set to 0)

Word 80: (M) 01fch Major version number

0000h or FFFFh = device does not report version

0000000b 15:9 Reserved

F 1b 8 1 = supports ATA8-ACS

F 1b 7 1 = supports ATA/ATAPI-7

F 1b 6 1 = supports ATA/ATAPI-6

F 1b 5 1 = supports ATA/ATAPI-5

F 1b 4 1 = supports ATA/ATAPI-4

X 1b 3 Obsolete

X 1b 2 Obsolete

X 0b 1 Obsolete

0b 0 Reserved

Word 81: (M) 0110h Minor revision number

F 0000h or FFFFh = device does not report version

F 0001h-000Ch = Obsolete

F 000Dh = ATA/ATAPI-4 X3T13 1153D revision 6

F 000Eh = ATA/ATAPI-4 T13 1153D revision 13

F 000Fh = ATA/ATAPI-4 X3T13 1153D revision 7

F 0010h = ATA/ATAPI-4 T13 1153D revision 18

F 0011h = ATA/ATAPI-4 T13 1153D revision 15

F 0012h = ATA/ATAPI-4 published ANSI NCITS 317-1998

F 0013h = ATA/ATAPI-5 T13 1321D revision 3

F 0014h = ATA/ATAPI-4 T13 1153D revision 14

F 0015h = ATA/ATAPI-5 T13 1321D revision 1

F 0016h = ATA/ATAPI-5 published ANSI NCITS 340-2000

F 0017h = ATA/ATAPI-4 T13 1153D revision 17

F 0018h = ATA/ATAPI-6 T13 1410D revision 0

F 0019h = ATA/ATAPI-6 T13 1410D revision 3a

F 001Ah = ATA/ATAPI-7 T13 1532D revision 1

F 001Bh = ATA/ATAPI-6 T13 1410D revision 2

F 001Ch = ATA/ATAPI-6 T13 1410D revision 1

001Dh Reserved

F 001Eh = ATA/ATAPI-7 T13 1532D revision 0

F 001Fh-0020h = Reserved

F 0021h = ATA/ATAPI-7 T13 1532D revision 4a

F 0022h = ATA/ATAPI-6 published, ANSI INCITS 361-2002

F 0023h-FFFFh Reserved

Word 82: (M) 746bh Commands and feature sets supported

X 0b 15 Obsolete

F 1b 14 1 = NOP command supported

F 1b 13 1 = READ BUFFER command supported

F 1b 12 1 = WRITE BUFFER command supported

X 0b 11 Obsolete

F 1b 10 1 = Host Protected Area feature set supported

F 0b 9 1 = DEVICE RESET command supported

F 0b 8 1 = SERVICE interrupt supported

F 0b 7 1 = release interrupt supported

F 1b 6 1 = look-ahead supported

F 1b 5 1 = write cache supported

F 0b 4 Shall be cleared to zero to indicate that the PACKET feature set is not

supported

F 1b 3 1 = mandatory Power Management feature set supported

F 0b 2 Obsolete

F 1b 1 1 = Security Mode feature set supported

F 1b 0 1 = SMART feature set supported

Word 83: (M) 7469h Commands and feature sets supported

F 0b 15 Shall be cleared to zero

F 1b 14 Shall be set to one

F 1b 13 1 = FLUSH CACHE EXT command supported

F 1b 12 1 = mandatory FLUSH CACHE command supported

F 0b 11 1 = Device Configuration Overlay feature set supported

F 1b 10 1 = 48-bit Address feature set supported

F 0b 9 1 = Automatic Acoustic Management feature set supported

F 0b 8 1 = SET MAX security extension supported

F 0b 7 See Address Offset Reserved Area Boot NCITS TR27:2001

F 1b 6 1 = SET FEATURES subcommand required to spin-up after power-up

F 1b 5 1 = Power-Up In Standby features set supported

X 0b 4 Obsolete

F 1b 3 1 = Advanced Power Management feature set supported

F 0b 2 1 = CFA feature set supported

F 0b 1 1 = READ/WRITE DMA QUEUED supported

F 1b 0 1 = DOWNLOAD MICROCODE command supported

Word 84: (M) 6163h Commands and feature sets supported

F 0b 15 Shall be cleared to zero

F 1b 14 Shall be set to one

F 1b 13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported

F 0b 12 Reserved for technical report INCITS TR-37-2004 (TLC)

F 0b 11 Reserved for technical report INCITS TR-37-2004 (TLC)

X 00b 10:9 1 = Obsolete

F 1b 8 1 = 64-bit Word wide name supported

F 0b 7 1 = WRITE DMA QUEUEDFUA EXT command supported

F 1b 6 1 = WRITE DMA FUA EXT and WRITE MULTI FUA EXT commands supported

F 1b 5 1 = General Purpose Logging feature set supported

F 0b 4 1 = Streaming feature set supported

F 0b 3 1 = Media Card Pass Through Command feature set supported

F 0b 2 1 = Media serial number supported

F 1b 1 1 = SMART self-test supported

F 1b 0 1 = SMART error logging supported

Word 85: (M) 7429h Commands and feature sets supported or enabled

X 0b 15 Obsolete

F 1b 14 1 = NOP command supported

F 1b 13 1 = READ BUFFER command supported

F 1b 12 1 = WRITE BUFFER command supported

X 0b 11 Obsolete

V 1b 10 1 = Host Protected Area feature set enabled

F 0b 9 1 = DEVICE RESET command supported

V 0b 8 1 = SERVICE interrupt enabled

V 0b 7 1 = release interrupt enabled

V 0b 6 1 = look-ahead enabled

V 1b 5 1 = write cache enabled

F 0b 4 Shall be cleared to zero to indicate that the PACKET feature set is not supported.

F 1b 3 1 = Power Management feature set enabled

X 0b 2 Obsolete

V 0b 1 1 = Security Mode feature set enabled

V 1b 0 1 = SMART feature set enabled

Word 86: (M) b449h Commands and feature sets supported or enabled

F 1b 15 1 = Words 120-119 are valid

0b 14 1 = Reserved

F 1b 13 1 = FLUSH CACHE EXT command supported

F 1b 12 1 = FLUSH CACHE command supported

F 0b 11 1 = DCO feature set is supported

F 1b 10 1 = 48-bit Address features set supported

V 0b 9 1 = Automatic Acoustic Management feature set enabled

V 0b 8 1 = SET MAX security enabled by SET MAX SET PASSWORD

0b 7 Reserved for address Offset Reserved Area Boot,INCITS TR27:2001

F 1b 6 1 = SET FEATURES subcommand required to spin-up after power-up

V 0b 5 1 = Power-Up In Standby features set enabled

X 0b 4 Obsolete

V 1b 3 1 = Advanced Power Management feature set enabled

F 0b 2 1 = CFA feature set supported

F 0b 1 1 = READ/WRITE DMA QUEUED command supported

F 1b 0 1 = DOWNLOAD MICROCODE command supported

Word 87: (M) 6163h Commands and feature sets supported or enabled

F 0b 15 Shall be cleared to zero

F 0b 14 Shall be set to one

F 0b 13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported

0b 12 Reserved for technical report- INCITS tr-37-2004 (TLC)

0b 11 Reserved for technical report- INCITS TR-37-2004 (TLC)

X 00b 10:9 Obsolete

F 1b 8 1 = 64 bit Word wide name supported

F 0b 7 1 = WRITE DMA QUEUED FUA EXT command supported

F 1b 6 1 = WRITE DMA FUA EXT and WRITE MULTI FUA EXT commands

supported

F 1b 5 1 = General Purpose Logging feature set supported

X 0b 4 Obsolete

V 0b 3 1 = Media Card Pass Through Command feature set supported

V 0b 2 1 = Media serial number is valid

F 1b 1 1 = SMART self-test supported

F 1b 0 1 = SMART error logging supported

Word 88: (O) 207fh Ultra DMA modes

0b 15 Reserved

V 0b 14 1 = Ultra DMA mode 6 is selected

0 = Ultra DMA mode 6 is not selected

V 1b 13 1 = Ultra DMA mode 5 is selected

0 = Ultra DMA mode 5 is not selected

V 0b 12 1 = Ultra DMA mode 4 is selected

0 = Ultra DMA mode 4 is not selected

V 0b 11 1 = Ultra DMA mode 3 is selected

0 = Ultra DMA mode 3 is not selected

V 0b 10 1 = Ultra DMA mode 2 is selected

0 = Ultra DMA mode 2 is not selected

V 0b 9 1 = Ultra DMA mode 1 is selected

0 = Ultra DMA mode 1 is not selected

V 0b 8 1 = Ultra DMA mode 0 is selected

0 = Ultra DMA mode 0 is not selected

0b 7 Reserved

F 1b 6 1 = Ultra DMA mode 6 and below are supported

F 1b 5 1 = Ultra DMA mode 5 and below are supported

F 1b 4 1 = Ultra DMA mode 4 and below are supported

F 1b 3 1 = Ultra DMA mode 3 and below are supported

F 1b 2 1 = Ultra DMA mode 2 and below are supported

F 1b 1 1 = Ultra DMA mode 1 and below are supported

F 1b 0 1 = Ultra DMA mode 0 is supported

Word 89: (O) 0001h Time required for security erase unit completion

00h 15:8 Reserved

F 01h 7:0 Time required for Normal Erase mode SECURITY ERASE UNIT command

Word 90: (O) 0000h Time required for Enhanced security erase completion

00h 15:8 Reserved

F 00h 7:0 Time required for Enhanced Erase mode SECURITY ERASE UNIT command

Word 91: (O) 00feh Current APM level value (Advanced Power Management)

Word 92: (O) fffeh Master Password Identifier

Word 93: (M) 0000h Hardware reset result. The contents of bits (12-0) of this world shall change only during the execution of a hardware reset (7.18.7.47)

F 0b 15 Shall be cleared to zero.

F 0b 14 Shall be set to one.

V 0b 13 1 = dev detected CBLID- above ViHB

0 = dev detected CBLID- below ViL

V 00000b 12:8 Device 1 HW reset result. Device 0 shall clear these bits to 0.

Device 1 shall set these bits as follows:

12 Reserved.

11 0 = Device 1 did not assert PDIAG-.

1 = Device 1 asserted PDIAG-.

V 00b 10:9 These bits indicate how Dev 1 determined device number:

00 = Reserved.

01 = a jumper was used.

10 = the CSEL signal was used.

11 = some other method was used or the method is unknown

0b 8 Shall be set to one.

7:0 Device 0 hardware reset result. Device 1 shall clear these bits to 0.

Device 0 shall set these bits as follows:

0b 7 Reserved.

F 0b 6 0 = Device 0 not respond when Device 1 is selected.

1 = Device 0 responds when Device 1 is selected.

V 0b 5 0 = Device 0 did not detect assertion of DASP-.

1 = Device 0 detected assertion of DASP-.

V 0b 4 0 = Device 0 did not detect assertion of PDIAG-.

1 = Device 0 detected assertion of PDIAG-.

V 0b 3 0 = Device 0 failed diagnostics.

1 = Device 0 passed diagnostics.

V 00b 2:1 These bits indicate how Device 0 determined device number:

00 = Reserved.

01 = a jumper was used.

10 = the CSEL signal was used.

11 = some other method was used or the method unknown.

F 0b 0 Shall be set to one.

Word 94: (O) 0000h Current AAM value (see 7.18.7.48)

F 00h 15:8 Vendor's recommended acoustic management value.

V 00h 7:0 Current automatic acoustic management value.

Word 95: (O) 0000h Stream Minimum Request Size

Word 96: (O) 0000h Streaming Transfer Time - DMA

Word 97: (O) 0000h Streaming Access Latency - DMA and PIO

Word 98: (O) 0000h 0000h Streaming Performance Granularity (DWord)

Word 100: (O) Total Number of User Addressable Logical Sectors for 48-bit commands (QWord)

V %04xh %04xh %04xh %04xh

Word 104: (O) 0000h Streaming Transfer Time - PIO (see 7.18.7.54)

Word 105: 0008h Reserved

Word 106: (O) 4000h Physical sector size / Logical Sector Size

F 0b 15 Shall be cleared to zero

F 1b 14 Shall be set to one

F 0b 13 1 = Device has multiple logical sectors per physical sector.

F 0b 12 1 = Device Logical Sector Longer than 256 Words

00000000b 11:4 Reserved

F 0000b 3:0 2^x logical sectors per physical sector

Word 107: (O) 0000h Inter-seek delay for ISO-7779 standard acoustic testing in microseconds

Word 108: (M) World wide name

F e8-3fffffffa-97 e412653fffffffc3 IeeeOUI-UniqueID

Word 112: (O) Reserved for 128 bit world wide name extension to 128 bits

0000h 0000h 0000h 0000h

Word 116: (O) 0000h Reserved for INCITS TR-37-2004

Word 117: (O) 0000h 0000h Logical sector size (DWord) (see 7.18.7.61)

Word 119: (M) 401ah Commands and feature sets supported (Continued from words 82..84)

F 0b 15 Shall be cleared to zero

F 1b 14 Shall be set to one

00000000b 13:6 Reserved

F 0b 5 1 = The Free-fall Control feature set is supported

F 1b 4 1 = The DOWNLOAD MICROCODE command with mode 3 is supported

F 1b 3 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported

F 0b 2 1 = The WRITE UNCORRECTABLE EXT command is supported

F 1b 1 1 = The Write-Read-Verify feature set is supported

0b 0 Reserved for DDT

Word 120: (M) 4018h Commands and feature sets supported or enabled (Continued from words 85..87)

F 0b 15 Shall be cleared to zero

F 1b 14 Shall be set to one

00000000b 13:7 Reserved

V 0b 6 1 = Extended Status Reporting feature set is supported

V 0b 5 1 = The Free-fall Control feature set is enabled

F 1b 4 1 = The DOWNLOAD MICROCODE command with mode 3 is supported

F 1b 3 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported

F 0b 2 1 = The WRITE UNCORRECTABLE EXT command is supported

V 0b 1 1 = The Write-Read-Verify feature set is enabled

0b 0 Reserved for DDT

Word 121: Reserved for expanded supported and enable settings

0000h 0000h 0000h 0000h 0000h 0000h

Word 127: 0000h Obsolete

Word 128: (O) 0001h Security status

0000000b 15:9 Reserved

V 0b 8 Master Password Capability 0 = High, 1 = Maximum

00b 7:6 Reserved

F 0b 5 1 = Enhanced security erase supported

V 0b 4 1 = Security count expired

V 0b 3 1 = Security frozen

V 0b 2 1 = Security locked

V 0b 1 1 = Security enabled

F 1b 0 1 = Security supported

Word 129: Vendor specific

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h 0000h

Word 160: (O) 0000h CFA power mode (see 7.18.7.68)

F 0b 15 Word 160 supported

0b 14 Reserved

F 0b 13 CFA power mode 1 is required for one or more commands

implemented by the device

V 0b 12 CFA power mode 1 disabled

F 000000000000b 11:0 Maximum current in ma

Word 161: Reserved for the CompactFlashTM Association

0000h 0000h 0000h 0000h 0000h 0000h 0000h

Word 168: (O) 0000h See 7.18.7.70

000000000000b 15:4 Reserved

F 0000b 3:0 Device Nomimal Form Factor

Word 169: (O) 0001h DATA SET MANAGEMENT is supported (see 7.18.7.71)

000000000000000b 15:1 Reserved

F 1b 0 1 = th Trim bit in the DATA SET MANAGEMENT is supported

Word 170: (O) Addtional Product Identify (ATA String) (see 7.18.7.72)

0000h 0000h 0000h 0000h

Word 174: 0000h 0000h Reserved

Word 176: (O) Current media serial number (60 ASCII characters)

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h

Word 206: (O) 0021h SCT Command Transport

X 0000b 15:12 Vender Specific

000000b 11:6 Reserved

F 1b 5 SCT Command Transport Data Tables support

F 0b 4 SCT Command Transport Features Control supported

F 0b 3 SCT Command Transport Error Recovery control supported

F 0b 2 SCT Command Transport Write Same supported

F 0b 1 SCT Command Transport Long Sector Access supported

F 1b 0 SCT Command Transport supported

Word 207: 0000h 0000h Reserved for CE-ATA

Word 209: (O) 4000h Alignment of logical blocks within a larger physical block

0b 15 Shall be cleared to zero

1b 14 Shall be set to one

00000000000000b 13:0 Logical sector offset within the first physical sector where the first logical sector is placed

Word 210: (O) 0000h 0000h Write-Read-Verify Sector Count Mode 3 Only (DWord)

Word 212: (O) 0100h 0000h Write-Read-Verify Sector Count Mode 2 Only (DWord)

Word 214: (O) 0000h NV Cache Capabilities

F 0000b 15:12 NV Cache feature set version

F 0000b 11:8 NV Cache Power Mode feature set version

000b 7:5 Reserved

V 0b 4 1 = NV Cache feature set enabled

00b 3:2 Reserved

V 0b 1 1 = NV Cache Power Mode feature set enabled

F 0b 0 1 = NV Cache Power Mode feature set supported

Word 215: (O) 0000h NV Cache Size in Logical Blocks (DWord)

Word 217: (M) 0001h Nominal media rotation rate

Word 218: 0000h Reserved

Word 219: (O) 0000h NV Cache Options

15:8 Reserved

F 00h 7:0 Device Estimated Time to Spin Up in Seconds

Word 220: (O) 0000h See 7.18.7.84

15:8 Reserved

V 00h 7:0 Write-Read-Verify feature set current mode

Word 221: 0000h Reserved

Word 222: (M) 103fh Transport Major revision number. 0000h or FFFFh = device does not report version

F 0001b 15:12 Transport Type - 0 = Parallel, 1 = Serial, 2-Fh = Reserved

00000011b 11:4 Reserved Reserved

F 1b 3 Reserved SATA Rev 2.5

F 1b 2 Reserved SATA II: Extensions

F 1b 1 ATA/ATAPI-7 SATA 1.0a

F 1b 0 ATA8-APT ATA8-AST

Word 223: (M) 0000h Transport Minor revision number

Word 224: Reserved for CE-ATA

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h

Word 234: (O) 0000h Minimum number of 512 byte units per DOWNLOAD MICROCODE command mode 03h

Word 235: (O) 0000h Maximum number of 512 byte units per DOWNLOAD MICROCODE command mode 03h

Word 236: Reserved

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h

0000h 0000h 0000h

Word 255: (M) e1a5h Integrity word

e1h 15:8 Checksum

a5h 7:0 Signature

En espérant que ces données soient utiles car je vous avouerai que je ne comprend pas tout..

Lien vers le commentaire
Partager sur d’autres sites

Archivé

Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.

Aller sur la liste des sujets
×
×
  • Créer...