Aller au contenu

linux sur mon portable


Messages recommandés

et si je copie le Xorg.conf du mandriva ????

Tu peux toujours essayer, mais ce serait étonnant... le problème a l'air d'être que la version sur ta Debian subit une régression... m'est fort avis que ça doit plus venir des binaires de tes drivers que de la configuration...

... sinon, tu peux aller jeter un coup d'oeil sur le bugzila de dri chez freedesktop... et si le bug n'existe pas, le signaler... mais vu qu'il y a déjà un message dans les logs disant que le driver est broken, à mon avis, les devs sont au courant... ;)

Lien vers le commentaire
Partager sur d’autres sites

bon je vien d'installer mandriva 2007 spring et voila tout fonctionne

je te donne quand le xorg.conf de la mandriva

# File generated by XFdrake (rev 142098)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
   # font server independent of the X server to render fonts.
   FontPath "unix/:-1"

   # minimal fonts to allow X to run without xfs
   FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "ServerFlags"
   #DontZap # disable <Crtl><Alt><BS> (server abort)
   AllowMouseOpenFail # allows the server to start up even if the mouse does not work
   #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
   Load "dbe" # Double-Buffering Extension
   Load "v4l" # Video for Linux
   Load "extmod"
   Load "type1"
   Load "freetype"
   Load "glx" # 3D layer
   Load "dri" # direct rendering
EndSection

Section "InputDevice"
   Identifier "Keyboard1"
   Driver "kbd"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "fr"
   Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
   Identifier "Mouse1"
   Driver "mouse"
   Option "Protocol" "ExplorerPS/2"
   Option "Device" "/dev/mouse"
EndSection

Section "InputDevice"
   Identifier "SynapticsMouse1"
   Driver "synaptics"
   Option "SHMConfig" "on"
EndSection

Section "Monitor"
   Identifier "monitor1"
   VendorName "Plug'n Play"
   ModelName ""
   HorizSync 31.5-56
   VertRefresh 60-69

   # Monitor preferred modeline (60.0 Hz vsync, 49.4 kHz hsync, ratio 16/10)
   ModeLine "1280x800" 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync

   # TV fullscreen mode or DVD fullscreen output.
   # 768x576 @ 79 Hz, 50 kHz hsync
   ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630

   # 768x576 @ 100 Hz, 61.6 kHz hsync
   ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616

   # modeline generated by gtf(1) [handled by XFdrake]
   ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync

   # modeline generated by gtf(1) [handled by XFdrake]
   ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync

   # modeline generated by gtf(1) [handled by XFdrake]
   ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync

   # modeline generated by gtf(1) [handled by XFdrake]
   ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync

   # modeline generated by gtf(1) [handled by XFdrake]
   ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync

   # modeline generated by gtf(1) [handled by XFdrake]
   ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
EndSection

Section "Device"
   Identifier "device1"
   VendorName "ATI Technologies Inc"
   BoardName "ATI Radeon 9500 - X850"
   Driver "fglrx"
   Option "DPMS"
   Option "FSAAMSPosY1" "0.000000"
   Option "StereoSyncEnable" "1"

   # === disable PnP Monitor  ===
   #Option "NoDDC"
   Option "FSAAMSPosX5" "0.000000"
   Option "FSAAMSPosX2" "0.000000"
   Option "FSAAMSPosY4" "0.000000"
   Option "FSAAMSPosX4" "0.000000"
   Option "FSAAMSPosY0" "0.000000"
   Option "FSAADisableGamma" "no"

   # === Video Overlay for the Xv extension ===
   Option "VideoOverlay" "on"
   Option "GammaCorrectionII" "0x00000000"
   Option "ForceGenericCPU" "no"
   Option "VRefresh2" "unspecified"
   Option "CenterMode" "off"
   Option "FSAAMSPosY5" "0.000000"
   Option "IgnoreEDID" "off"

   # === OpenGL Overlay ===
   # Note: When OpenGL Overlay is enabled, Video Overlay
   # will be disabled automatically
   Option "OpenGLOverlay" "off"
   Option "FSAACustomizeMSPos" "no"

   # === FSAA ===
   Option "FSAAScale" "1"

   # === FireGL DDX driver module specific settings ===
   # === Screen Management ===
   Option "DesktopSetup" "0x00000000"
   Option "HSync2" "unspecified"
   Option "TVHStartAdj" "0"
   Option "FSAAMSPosX0" "0.000000"
   Option "no_dri" "no"
   Option "GammaCorrectionI" "0x00000000"
   Option "BlockSignalsOnLock" "on"
   Option "FSAAMSPosX1" "0.000000"
   Option "UseInternalAGPGART" "no"
   Option "MonitorLayout" "AUTO, AUTO"

   # === Misc Options ===
   Option "UseFastTLS" "0"

   # === disable/enable XAA/DRI ===
   Option "no_accel" "no"

   # === OpenGL specific profiles/settings ===
   Option "Capabilities" "0x00000000"
   Option "FSAAMSPosY3" "0.000000"
   Option "TVColorAdj" "0"
   Option "TVVPosAdj" "0"
   Option "TVStandard" "NTSC-M"
   Option "FSAAMSPosY2" "0.000000"

   # === TV-out Management ===
   Option "NoTV" "yes"
   Option "TVHPosAdj" "0"
   Option "TVHSizeAdj" "0"

   # === QBS Support ===
   Option "Stereo" "off"
   Option "ScreenOverlap" "0"
   Option "FSAAMSPosX3" "0.000000"
   Option "TVVSizeAdj" "0"
EndSection

Section "Screen"
   Identifier "screen1"
   Device "device1"
   Monitor "monitor1"
   DefaultColorDepth 24

   Subsection "Display"
       Depth 8
       Modes "1280x800"
   EndSubsection

   Subsection "Display"
       Depth 15
       Modes "1280x800"
   EndSubsection

   Subsection "Display"
       Depth 16
       Modes "1280x800"
   EndSubsection

   Subsection "Display"
       Depth 24
       Modes "1280x800"
   EndSubsection
EndSection

Section "ServerLayout"
   Identifier "layout1"
   InputDevice "Keyboard1" "CoreKeyboard"
   InputDevice "Mouse1" "CorePointer"
   InputDevice "SynapticsMouse1" "AlwaysCore"
   Screen "screen1"
EndSection

voila et merci encore :francais:

Lien vers le commentaire
Partager sur d’autres sites

bonsoir voici de mes nouvelles j'ai reinstaller debian testing et installer le piote proprio ati voici mon xorg vous en pensez koi ?

xorg.conf (xorg X Window System server configuration file)

#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
       Identifier     "Default Layout"
       Screen      0  "aticonfig-Screen[0]" 0 0
       InputDevice    "Generic Keyboard"
       InputDevice    "Configured Mouse"
       InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "InputDevice"
       Identifier  "Generic Keyboard"
       Driver      "kbd"
       Option      "CoreKeyboard"
       Option      "XkbRules" "xorg"
       Option      "XkbModel" "pc105"
       Option      "XkbLayout" "fr"
       Option      "XkbVariant" "latin9"
EndSection

Section "InputDevice"
       Identifier  "Configured Mouse"
       Driver      "mouse"
       Option      "CorePointer"
       Option      "Device" "/dev/input/mice"
       Option      "Protocol" "ImPS/2"
       Option      "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
       Identifier  "Synaptics Touchpad"
Driver      "synaptics"
       Option      "SendCoreEvents" "true"
       Option      "Device" "/dev/psaux"
       Option      "Protocol" "auto-dev"
       Option      "HorizScrollDelta" "0"
EndSection

Section "Monitor"
       Identifier   "Écran générique"
       Option      "DPMS"
EndSection

Section "Monitor"
       Identifier   "aticonfig-Monitor[0]"
       Option      "VendorName" "ATI Proprietary Driver"
       Option      "ModelName" "Generic Autodetecting Monitor"
       Option      "DPMS" "true
EndSection

Section "Device"
       Identifier  "ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP]"
       Driver      "ati"
       BusID       "PCI:1:5:0"
EndSection

Section "Device"
       Identifier  "aticonfig-Device[0]"
       Driver      "fglrx"
EndSection

Section "Screen"
       Identifier "Default Screen"
       Device     "ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP]"
       Monitor    "Écran générique"
DefaultDepth     24
       SubSection "Display"
               Modes    "1280x800"
       EndSubSection
EndSection

Section "Screen"
       Identifier "aticonfig-Screen[0]"
       Device     "aticonfig-Device[0]"
       Monitor    "aticonfig-Monitor[0]"
       DefaultDepth     24
       SubSection "Display"
               Viewport   0 0
               Depth     24
       EndSubSection
EndSection

voila :craint:

Lien vers le commentaire
Partager sur d’autres sites

Archivé

Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.

×
×
  • Créer...