Jump to content

probleme configuration TWINVIEW xorg.conf


Recommended Posts

Bonjour a tous,

après avoir largement ecumer le web pour trouver la solution a mon problem j'ai fini par tomber sur le cite de PCINpact.

Je suis un nouvel utilisateur de linux. J'ai une carte graphique NVIDIA Gforce 2 mx avec sortie TV. J'ai reussi a installer le driver NVIDIA mais je n'arrive pas a fair marcher ma sortie TV...

Apres de multiples recherches et quelques plantages du serveur X j'en sui arriver ici:

j'ai ajouter les lingnes suivantes dans la section DEVICE du fichier xorg.conf:

Option "TwinView" "yes"

Option "SecondMonitorHorizSync" "30-50"

Option "SecondMonitorVertRefresh" "60"

Option "Metamodes" "1280x1024, 800x600"

Option "TwinViewOrientation" "Clone"

Option "TVStandard" "PAL-N"

Option "TVOutFormat" "COMPOSITE"

le serveur X demar correctement mais rien sur la TV, dans la section DISPLAY DEVICE de nvidia-settings seul mon ecran "d'origine" aparait, de plus lorsque j'etein mon PC pendan toute la sequence ou il s'etein l'ecran (du PC toujours rien sur la TV) affiche un brouillard de motifs pseudo carrés noir et blanc.

Si quelqu'un peu m'aider sa serait simpa.

Merci d'avance, et meme si j'ai installer twinview en 5min sous XP je suis très satisfait de linux!!!!!!!!! :transpi:

pour plus de detaille voici l'integralitéé de mon fichier xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig

# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Mar 29 14:43:26 PST 2006

# File generated by XFdrake.

# **********************************************************************

# Refer to the XF86Config man page for details about the format of

# this file.

# **********************************************************************

Section "ServerLayout"

Identifier "layout1"

Screen "screen1" 0 0

InputDevice "Keyboard1" "CoreKeyboard"

InputDevice "Mouse1" "CorePointer"

EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)

# By default, Mandrake 6.0 and later now use a font server independent of

# the X server to render fonts.

FontPath "unix/:-1"

EndSection

Section "Module"

Load "dbe" # Double-Buffering Extension

Load "v4l" # Video for Linux

Load "extmod"

Load "type1"

Load "freetype"

Load "glx" # 3D layer

EndSection

Section "ServerFlags"

#DontZap # disable <Crtl><Alt><BS> (server abort)

#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)

# allows the server to start up even if the mouse does not work

Option "allowmouseopenfail"

EndSection

Section "InputDevice"

Identifier "Keyboard1"

Driver "keyboard"

Option "XkbModel" "pc105"

Option "XkbLayout" "fr"

Option "XkbOptions" "compose:rwin"

EndSection

Section "InputDevice"

Identifier "Mouse1"

Driver "mouse"

Option "Protocol" "ExplorerPS/2"

Option "Device" "/dev/mouse"

Option "ZAxisMapping" "6 7"

EndSection

Section "Monitor"

# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)

Identifier "monitor1"

VendorName "Plug'n Play"

ModelName "Philips 190B"

HorizSync 30.0 - 83.0

VertRefresh 56.0 - 76.0

ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630

ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616

EndSection

Section "Device"

Identifier "device1"

Driver "nvidia"

VendorName "nVidia Corp."

BoardName "NVIDIA GeForce2 DDR (generic)"

Option "TwinView" "yes"

Option "SecondMonitorHorizSync" "30-50"

Option "SecondMonitorVertRefresh" "60"

Option "Metamodes" "1280x1024, 800x600"

Option "TwinViewOrientation" "Clone"

Option "TVStandard" "PAL-N"

Option "TVOutFormat" "COMPOSITE"

EndSection

Section "Screen"

Identifier "screen1"

Device "device1"

Monitor "monitor1"

DefaultDepth 24

Option "DPMS"

SubSection "Display"

Virtual 1280 1024

Depth 8

EndSubSection

SubSection "Display"

Virtual 1280 1024

Depth 15

EndSubSection

SubSection "Display"

Virtual 1280 1024

Depth 16

EndSubSection

SubSection "Display"

Virtual 1280 1024

Depth 24

EndSubSection

EndSection

pour plus de detaille voici l'integralitéé de mon fichier xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig

# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Mar 29 14:43:26 PST 2006

# File generated by XFdrake.

# **********************************************************************

# Refer to the XF86Config man page for details about the format of

# this file.

# **********************************************************************

Section "ServerLayout"

Identifier "layout1"

Screen "screen1" 0 0

InputDevice "Keyboard1" "CoreKeyboard"

InputDevice "Mouse1" "CorePointer"

EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)

# By default, Mandrake 6.0 and later now use a font server independent of

# the X server to render fonts.

FontPath "unix/:-1"

EndSection

Section "Module"

Load "dbe" # Double-Buffering Extension

Load "v4l" # Video for Linux

Load "extmod"

Load "type1"

Load "freetype"

Load "glx" # 3D layer

EndSection

Section "ServerFlags"

#DontZap # disable <Crtl><Alt><BS> (server abort)

#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)

# allows the server to start up even if the mouse does not work

Option "allowmouseopenfail"

EndSection

Section "InputDevice"

Identifier "Keyboard1"

Driver "keyboard"

Option "XkbModel" "pc105"

Option "XkbLayout" "fr"

Option "XkbOptions" "compose:rwin"

EndSection

Section "InputDevice"

Identifier "Mouse1"

Driver "mouse"

Option "Protocol" "ExplorerPS/2"

Option "Device" "/dev/mouse"

Option "ZAxisMapping" "6 7"

EndSection

Section "Monitor"

# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)

Identifier "monitor1"

VendorName "Plug'n Play"

ModelName "Philips 190B"

HorizSync 30.0 - 83.0

VertRefresh 56.0 - 76.0

ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync

ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630

ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616

EndSection

Section "Device"

Identifier "device1"

Driver "nvidia"

VendorName "nVidia Corp."

BoardName "NVIDIA GeForce2 DDR (generic)"

Option "TwinView" "yes"

Option "SecondMonitorHorizSync" "30-50"

Option "SecondMonitorVertRefresh" "60"

Option "Metamodes" "1280x1024, 800x600"

Option "TwinViewOrientation" "Clone"

Option "TVStandard" "PAL-N"

Option "TVOutFormat" "COMPOSITE"

EndSection

Section "Screen"

Identifier "screen1"

Device "device1"

Monitor "monitor1"

DefaultDepth 24

Option "DPMS"

SubSection "Display"

Virtual 1280 1024

Depth 8

EndSubSection

SubSection "Display"

Virtual 1280 1024

Depth 15

EndSubSection

SubSection "Display"

Virtual 1280 1024

Depth 16

EndSubSection

SubSection "Display"

Virtual 1280 1024

Depth 24

EndSubSection

EndSection

Link to comment
Share on other sites

j'ai deja poster un sujet a ce propos, pas de reponse je réesay..

je suis sous mandriva 2006 (et oui jsui 1 debutant sous unix, l'installe manuel de debian est prevue quand j'aurai du temps), j'ai reussi a installer les drivers proprio NVIDIA (pas facile...) mais je n'arive pas a utiliser ma sortie TV..

j'ai effectuer de nombreuses recherches sur le web et suite a cela j'aimodifier mon fichier xorg.conf de la maniere suivante:

dans la section device j'ai ajouter.

Option "TwinView" "yes"

Option "SecondMonitorHorizSync" "30-50"

Option "SecondMonitorVertRefresh" "60"

Option "Metamodes" "1280x1024, 800x600"

Option "TwinViewOrientation" "Clone"

Option "TVStandard" "PAL-N"

Option "TVOutFormat" "COMPOSITE"

quelqu'un pourait il m'aider? me dir ce qui cloche ou ce qui manque.

merci d'avance, cordialement MOLCA

Link to comment
Share on other sites

histoir de relancer.. au cas ou.
j'ai deja poster un sujet a ce propos, pas de reponse je réesay..

je suis sous mandriva 2006 (et oui jsui 1 debutant sous unix, l'installe manuel de debian est prevue quand j'aurai du temps), j'ai reussi a installer les drivers proprio NVIDIA (pas facile...) mais je n'arive pas a utiliser ma sortie TV..

j'ai effectuer de nombreuses recherches sur le web et suite a cela j'aimodifier mon fichier xorg.conf de la maniere suivante:

dans la section device j'ai ajouter.

Option "TwinView" "yes"

Option "SecondMonitorHorizSync" "30-50"

Option "SecondMonitorVertRefresh" "60"

Option "Metamodes" "1280x1024, 800x600"

Option "TwinViewOrientation" "Clone"

Option "TVStandard" "PAL-N"

Option "TVOutFormat" "COMPOSITE"

quelqu'un pourait il m'aider? me dir ce qui cloche ou ce qui manque.

merci d'avance, cordialement MOLCA

Pas de multipost et pas de up toutes les 2H, merci...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...