Gros PB samba + imprimante et Win xp

[rjcb]

Salut,

J'essaie de configurer une imprimante partagée avec des clients win xp.

Ca fait 6 mois que j'essaie et j'ai jamais réussi:

donc j'ai cups d'installé, et voici mon smb.conf:

[root@rjcserveur ~]# rpm -aq | grep cups

cups-samba-drivers-1.1.18-1

hal-cups-utils-0.5.3-3

libgnomecups-0.2.0-2

cups-1.1.23-15.1

cups-libs-1.1.23-15.1

[root@rjcserveur ~]# cd /etc

[root@rjcserveur etc]# cd samba

[root@rjcserveur samba]# testparm smb.conf

Load smb config files from smb.conf

Processing section "[netlogon]"

Processing section "[profiles]"

Processing section "[homes]"

Processing section "[internet]"

Processing section "[ftp]"

Processing section "

"

Processing section "[cdrom]"

Processing section "[hp]"

Server's Role (logon server) NOT ADVISED with domain-level security

Loaded services file OK.

Warning: Service hp defines a print command, but print command parameter is ignored when using CUPS libraries.

Server role: ROLE_DOMAIN_BDC

Press enter to see a dump of your service definitions

# Global parameters

[global]

workgroup = NETWORKRJC

server string = Serveur %v

security = DOMAIN

passwd program = /usr/bin/passwd %u

passwd chat = *New* %n\n *Re* %n\n *pa*

username map = /etc/samba/smbusers

unix password sync = Yes

log file = /var/log/samba/log.%U

max log size = 50

socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

printcap name = cups

logon script = logon.cmd

logon path = \\RJCSERVEUR\profiles\%u

logon drive = K:

logon home = \\RJCSERVEUR\%u

domain logons = Yes

os level = 64

preferred master = Yes

domain master = Yes

dns proxy = No

wins support = Yes

admin users = root

printer admin = root, rjc

hosts allow = 192.168.1.0/255.255.255.0, 127.

[netlogon]

path = /home/netlogon/%u

browseable = No

[profiles]

path = /home/export/profile/

read only = No

create mask = 0700

directory mask = 0700

browseable = No

[homes]

comment = Repertoire Personnel

valid users = root, @users

write list = root, @users

read only = No

browseable = No

[internet]

comment = internet

path = /internet

valid users = root, @users

write list = root, @users

[ftp]

comment = ftp

path = /ftp

valid users = root, @users

write list = root, @users

[html]

comment = html

path = /var/www/html

valid users = root, @users

write list = root, @users

[cdrom]

comment = cdrom

path = /media/cdrom

valid users = root, @users

force user = root

[hp]

path = /tmp

guest ok = Yes

printable = Yes

print command = lpr -h -P'%p' %s

use client driver = Yes

[root@rjcserveur samba]#

Mon cupsd.conf modifié afin d'accepter des pcs venant du réseau:

#

# "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $"

#

# Sample configuration file for the Common UNIX Printing System (CUPS)

# scheduler.

#

# Copyright 1997-2005 by Easy Software Products, all rights reserved.

#

# These coded instructions, statements, and computer programs are the

# property of Easy Software Products and are protected by Federal

# copyright law. Distribution and use rights are outlined in the file

# "LICENSE.txt" which should have been included with this file. If this

# file is missing or damaged please contact Easy Software Products

# at:

#

# Attn: CUPS Licensing Information

# Easy Software Products

# 44141 Airport View Drive, Suite 204

# Hollywood, Maryland 20636 USA

#

# Voice: (301) 373-9600

# EMail: cups-info@cups.org

# WWW: http://www.cups.org

#

########################################################################

# #

# This is the CUPS configuration file. If you are familiar with #

# Apache or any of the other popular web servers, we've followed the #

# same format. Any configuration variable used here has the same #

# semantics as the corresponding variable in Apache. If we need #

# different functionality then a different name is used to avoid #

# confusion... #

# #

########################################################################

########

######## Server Identity

########

#

# ServerName: the hostname of your server, as advertised to the world.

# By default CUPS will use the hostname of the system.

#

# To set the default server used by clients, see the client.conf file.

#

#ServerName myhost.domain.com

#

# ServerAdmin: the email address to send all complaints/problems to.

# By default CUPS will use "root@hostname".

#

#ServerAdmin root@your.domain.com

########

######## Server Options

########

#

# AccessLog: the access log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/access_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#AccessLog /var/log/cups/access_log

#

# Classification: the classification level of the server. If set, this

# classification is displayed on all pages, and raw printing is disabled.

# The default is the empty string.

#

#Classification classified

#Classification confidential

#Classification secret

#Classification topsecret

#Classification unclassified

#

# ClassifyOverride: whether to allow users to override the classification

# on printouts. If enabled, users can limit banner pages to before or

# after the job, and can change the classification of a job, but cannot

# completely eliminate the classification or banners.

#

# The default is off.

#

#ClassifyOverride off

#

# DataDir: the root directory for the CUPS data files.

# By default "/usr/share/cups".

#

#DataDir /usr/share/cups

#

# DefaultCharset: the default character set to use. If not specified,

# defaults to "utf-8". Note that this can also be overridden in

# HTML documents...

#

#DefaultCharset utf-8

#

# DefaultLanguage: the default language if not specified by the browser.

# If not specified, the current locale is used.

#

#DefaultLanguage en

#

# DocumentRoot: the root directory for HTTP documents that are served.

# By default "/usr/share/doc/cups-1.1.23".

#

#DocumentRoot /usr/share/doc/cups-1.1.23

#

# ErrorLog: the error log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/error_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#ErrorLog /var/log/cups/error_log

# LogFilePerm: determines the file mode to set log files to.

#

LogFilePerm 0600

#

# FileDevice: determines whether the scheduler will allow new printers

# to be added using device URIs of the form "file:/foo/bar". The default

# is not to allow file devices due to the potential security vulnerability

# and due to the fact that file devices do not support raw printing.

#

#FileDevice No

#

# FontPath: the path to locate all font files (currently only for pstoraster)

# By default "/usr/share/cups/fonts".

#

#FontPath /usr/share/cups/fonts

#

# LogLevel: controls the number of messages logged to the ErrorLog

# file and can be one of the following:

#

# debug2 Log everything.

# debug Log almost everything.

# info Log all requests and state changes.

# warn Log errors and warnings.

# error Log only errors.

# none Log nothing.

#

MaxLogSize 2000000000

LogLevel info

#

# MaxLogSize: controls the maximum size of each log file before they are

# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

#

#MaxLogSize 0

#

# PageLog: the page log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/page_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#PageLog /var/log/cups/page_log

#

# PreserveJobHistory: whether or not to preserve the job history after a

# job is completed, cancelled, or stopped. Default is Yes.

#

#PreserveJobHistory Yes

#

# PreserveJobFiles: whether or not to preserve the job files after a

# job is completed, cancelled, or stopped. Default is No.

#

#PreserveJobFiles No

#

# AutoPurgeJobs: automatically purge jobs when not needed for quotas.

# Default is No.

#

#AutoPurgeJobs No

#

# MaxCopies: maximum number of copies that a user can request. Default is

# 100.

#

#MaxCopies 100

#

# MaxJobs: maximum number of jobs to keep in memory (active and completed.)

# Default is 500; the value 0 is used for no limit.

#

#MaxJobs 500

#

# MaxJobsPerPrinter: maximum number of active jobs per printer. The default

# is 0 for no limit.

#

#MaxJobsPerPrinter 0

#

# MaxJobsPerUser: maximum number of active jobs per user. The default

# is 0 for no limit.

#

#MaxJobsPerUser 0

#

# MaxPrinterHistory: controls the maximum number of history collections

# in the printer-state-history attribute. Set to 0 to disable history

# data.

#

#MaxPrinterHistory 10

#

# Printcap: the name of the printcap file. Default is /etc/printcap.

# Leave blank to disable printcap file generation.

#

Printcap /etc/printcap

#

# PrintcapFormat: the format of the printcap file, currently either

# BSD or Solaris. The default is "BSD".

#

#PrintcapFormat BSD

#PrintcapFormat Solaris

#

# PrintcapGUI: the name of the GUI options panel program to associate

# with print queues under IRIX. The default is "/usr/bin/glpoptions"

# from ESP Print Pro.

#

# This option is only used under IRIX; the options panel program

# must accept the "-d printer" and "-o options" options and write

# the selected printer options back to stdout on completion.

#

#PrintcapGUI /usr/bin/glpoptions

#

# RequestRoot: the directory where request files are stored.

# By default "/var/spool/cups".

#

#RequestRoot /var/spool/cups

#

# RemoteRoot: the name of the user assigned to unauthenticated accesses

# from remote systems. By default "remroot".

#

#RemoteRoot remroot

#

# ServerBin: the root directory for the scheduler executables.

# By default "/usr/lib/cups".

#

#ServerBin /usr/lib/cups

#

# ServerRoot: the root directory for the scheduler.

# By default "/etc/cups".

#

#ServerRoot /etc/cups

#

# ServerTokens: specifies what information in provided in the Server

# header of HTTP responses. The default is Minor.

#

# ServerTokens None

# ServerTokens ProductOnly CUPS

# ServerTokens Major CUPS/1

# ServerTokens Minor CUPS/1.1

# ServerTokens Minimal CUPS/1.1.23

# ServerTokens OS CUPS/1.1.23 (uname)

# ServerTokens Full CUPS/1.1.23 (uname) IPP/1.1

#

#ServerTokens Minor

########

######## Fax Support

########

#

# FaxRetryLimit: the number of times a fax job is retried.

# The default is 5 times.

#

#FaxRetryLimit 5

#

# FaxRetryInterval: the number of seconds between fax job retries.

# The default is 300 seconds/5 minutes.

#

#FaxRetryInterval 300

########

######## Encryption Support

########

#

# ServerCertificate: the file to read containing the server's certificate.

# Defaults to "/etc/cups/ssl/server.crt".

#

#ServerCertificate /etc/cups/ssl/server.crt

#

# ServerKey: the file to read containing the server's key.

# Defaults to "/etc/cups/ssl/server.key".

#

#ServerKey /etc/cups/ssl/server.key

########

######## Filter Options

########

#

# User/Group: the user and group the server runs under. Normally this

# must be lp and sys, however you can configure things for another

# user or group as needed.

#

# Note: the server must be run initially as root to support the

# default IPP port of 631. It changes users whenever an external

# program is run, or if the RunAsUser directive is specified...

#

#User lp

#Group sys

#

# RIPCache: the amount of memory that each RIP should use to cache

# bitmaps. The value can be any real number followed by "k" for

# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles

# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).

#

#RIPCache 8m

#

# TempDir: the directory to put temporary files in. This directory must be

# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or

# the value of the TMPDIR environment variable.

#

#TempDir /var/spool/cups/tmp

#

# FilterLimit: sets the maximum cost of all job filters that can be run

# at the same time. A limit of 0 means no limit. A typical job may need

# a filter limit of at least 200; limits less than the minimum required

# by a job force a single job to be printed at any time.

#

# The default limit is 0 (unlimited).

#

#FilterLimit 0

########

######## Network Options

########

#

# Ports/addresses that we listen to. The default port 631 is reserved

# for the Internet Printing Protocol (IPP) and is what we use here.

#

# You can have multiple Port/Listen lines to listen to more than one

# port or address, or to restrict access:

#

# Port 80

# Port 631

# Listen hostname

# Listen hostname:80

# Listen hostname:631

# Listen 1.2.3.4

# Listen 1.2.3.4:631

#

# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades

# for encryption. If you want to support web-based encryption you'll

# probably need to listen on port 443 (the "https" port...)

#

# NOTE 2: In order for the command-line and web interfaces to work, you

# must have at least one Port or Listen line that allows access from the

# local loopback address (localhost).

#

#Port 80

#Port 443

#

# HostNameLookups: whether or not to do lookups on IP addresses to get a

# fully-qualified hostname. This defaults to Off for performance reasons...

#

#HostNameLookups On

#

# KeepAlive: whether or not to support the Keep-Alive connection

# option. Default is on.

#

#KeepAlive On

#

# KeepAliveTimeout: the timeout before Keep-Alive connections are

# automatically closed. Default is 60 seconds.

#

#KeepAliveTimeout 60

#

# MaxClients: controls the maximum number of simultaneous clients that

# will be handled. Defaults to 100.

#

#MaxClients 100

#

# MaxClientsPerHost: controls the maximum number of simultaneous clients that

# will be handled from a specific host. Defaults to 10 or 1/10th of the

# MaxClients setting, whichever is larger. A value of 0 specifies the

# automatic (10 or 1/10th) setting.

#

#MaxClientsPerHost 0

#

# MaxRequestSize: controls the maximum size of HTTP requests and print files.

# Set to 0 to disable this feature (defaults to 0.)

#

#MaxRequestSize 0

#

# Timeout: the timeout before requests time out. Default is 300 seconds.

#

#Timeout 300

########

######## Browsing Options

########

#

# Browsing: whether or not to broadcast and/or listen for CUPS printer

# information on the network. Enabled by default.

#

#Browsing On

#

# BrowseProtocols: which protocols to use for browsing. Can be

# any of the following separated by whitespace and/or commas:

#

# all - Use all supported protocols.

# cups - Use the CUPS browse protocol.

# slp - Use the SLPv2 protocol.

#

# The default is "cups".

#

# NOTE: If you choose to use SLPv2, it is *strongly* recommended that

# you have at least one SLP Directory Agent (DA) on your

# network. Otherwise, browse updates can take several seconds,

# during which the scheduler will not respond to client

# requests.

#

#BrowseProtocols cups

#

# BrowseAddress: specifies a broadcast address to be used. By

# default browsing information is not sent!

#

# Note: HP-UX does not properly handle broadcast unless you have a

# Class A, B, C, or D netmask (i.e. no CIDR support).

#

# Note: Using the "global" broadcast address (255.255.255.255) will

# activate a Linux demand-dial link with the default configuration.

# If you have a LAN as well as the dial-up link, use the LAN's

# broadcast address.

#

# The @LOCAL address broadcasts to all non point-to-point interfaces.

# For example, if you have a LAN and a dial-up link, @LOCAL would

# send printer updates to the LAN but not to the dial-up link.

# Similarly, the @IF(name) address sends to the named network

# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed

# automatically (no more than once every 60 seconds), so they can

# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.

#

#BrowseAddress x.y.z.255

#BrowseAddress x.y.255.255

#BrowseAddress x.255.255.255

#BrowseAddress 255.255.255.255

#BrowseAddress @LOCAL

#BrowseAddress @IF(name)

#

# BrowseShortNames: whether or not to use "short" names for remote printers

# when possible (e.g. "printer" instead of "printer@host".) Enabled by

# default.

#

#BrowseShortNames Yes

#

# BrowseAllow: specifies an address mask to allow for incoming browser

# packets. The default is to allow packets from all addresses.

#

# BrowseDeny: specifies an address mask to deny for incoming browser

# packets. The default is to deny packets from no addresses.

#

# Both "BrowseAllow" and "BrowseDeny" accept the following notations for

# addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The hostname/domainname restrictions only work if you have turned hostname

# lookups on!

#

#BrowseAllow address

#BrowseDeny address

#

# BrowseInterval: the time between browsing updates in seconds. Default

# is 30 seconds.

#

# Note that browsing information is sent whenever a printer's state changes

# as well, so this represents the maximum time between updates.

#

# Set this to 0 to disable outgoing broadcasts so your local printers are

# not advertised but you can still see printers on other hosts.

#

#BrowseInterval 30

#

# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.

#

#BrowseOrder allow,deny

#BrowseOrder deny,allow

#

# BrowsePoll: poll the named server(s) for printers

#

#BrowsePoll address:port

#

# BrowsePort: the port used for UDP broadcasts. By default this is

# the IPP port; if you change this you need to do it on all servers.

# Only one BrowsePort is recognized.

#

#BrowsePort 631

#

# BrowseRelay: relay browser packets from one address/network to another.

#

#BrowseRelay source-address destination-address

#BrowseRelay @IF(src) @IF(dst)

#

# BrowseTimeout: the timeout for network printers - if we don't

# get an update within this time the printer will be removed

# from the printer list. This number definitely should not be

# less the BrowseInterval value for obvious reasons. Defaults

# to 300 seconds.

#

#BrowseTimeout 300

#

# ImplicitClasses: whether or not to use implicit classes.

#

# Printer classes can be specified explicitly in the classes.conf

# file, implicitly based upon the printers available on the LAN, or

# both.

#

# When ImplicitClasses is On, printers on the LAN with the same name

# (e.g. Acme-LaserPrint-1000) will be put into a class with the same

# name. This allows you to setup multiple redundant queues on a LAN

# without a lot of administrative difficulties. If a user sends a

# job to Acme-LaserPrint-1000, the job will go to the first available

# queue.

#

# Enabled by default.

#

#ImplicitClasses On

#

# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit

# classes.

#

# When ImplicitAnyClasses is On and a local queue of the same name

# exists, e.g. "printer", "printer@server1", "printer@server1", then

# an implicit class called "Anyprinter" is created instead.

#

# When ImplicitAnyClasses is Off, implicit classes are not created

# when there is a local queue of the same name.

#

# Disabled by default.

#

#ImplicitAnyCLasses Off

#

# HideImplicitMembers: whether or not to show the members of an

# implicit class.

#

# When HideImplicitMembers is On, any remote printers that are

# part of an implicit class are hidden from the user, who will

# then only see a single queue even though many queues will be

# supporting the implicit class.

#

# Enabled by default.

#

#HideImplicitMembers On

########

######## Security Options

########

#

# SystemGroup: the group name for "System" (printer administration)

# access. The default varies depending on the operating system, but

# will be "sys", "system", or "root" (checked for in that order.)

#

#SystemGroup sys

#

# RootCertDuration: How frequently the root certificate is regenerated.

# Defaults to 300 seconds.

#

#RootCertDuration 300

#

# Access permissions for each directory served by the scheduler.

# Locations are relative to DocumentRoot...

#

# AuthType: the authorization to use:

#

# None - Perform no authentication

# Basic - Perform authentication using the HTTP Basic method.

# Digest - Perform authentication using the HTTP Digest method.

#

# (Note: local certificate authentication can be substituted by

# the client for Basic or Digest when connecting to the

# localhost interface)

#

# AuthClass: the authorization class; currently only "Anonymous", "User",

# "System" (valid user belonging to group SystemGroup), and "Group"

# (valid user belonging to the specified group) are supported.

#

# AuthGroupName: the group name for "Group" authorization.

#

# Order: the order of Allow/Deny processing.

#

# Allow: allows access from the specified hostname, domain, IP address,

# network, or interface.

#

# Deny: denies access from the specified hostname, domain, IP address,

# network, or interface.

#

# Both "Allow" and "Deny" accept the following notations for addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The host and domain address require that you enable hostname lookups

# with "HostNameLookups On" above.

#

# The @LOCAL address allows or denies from all non point-to-point

# interfaces. For example, if you have a LAN and a dial-up link,

# @LOCAL could allow connections from the LAN but not from the dial-up

# link. Similarly, the @IF(name) address allows or denies from the

# named network interface, e.g. @IF(eth0) under Linux. Interfaces are

# refreshed automatically (no more than once every 60 seconds), so

# they can be used on dynamically-configured interfaces, e.g. PPP,

# 802.11, etc.

#

# Encryption: whether or not to use encryption; this depends on having

# the OpenSSL library linked into the CUPS library and scheduler.

#

# Possible values:

#

# Always - Always use encryption (SSL)

# Never - Never use encryption

# Required - Use TLS encryption upgrade

# IfRequested - Use encryption if the server requests it

#

# The default value is "IfRequested".

#

<Location />

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.0.*

</Location>

#<Location /classes>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /classes/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /jobs>

#

# You may wish to limit access to job operations, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

## Anonymous access (default)

#AuthType None

## Require a username and password (Basic authentication)

#AuthType Basic

#AuthClass User

## Require a username and password (Digest/MD5 authentication)

#AuthType Digest

#AuthClass User

## Restrict access to local domain

#Order Deny,Allow

#Deny From All

#Allow From .mydomain.com

#</Location>

<Location /admin>

#

# You definitely will want to limit access to the administration functions.

# The default configuration requires a local connection from a user who

# is a member of the system group to do any admin tasks. You can change

# the group name using the SystemGroup directive.

#

AuthType Basic

AuthClass System

## Restrict access to local domain

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

#Encryption Required

</Location>

#

# End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $".

#

<Location /printers/printers>

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

AuthType None

Allow from All

</Location>

# Lines below are automatically generated - DO NOT EDIT

<Location /printers/printer>

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

AuthType None

Allow from All

</Location>

Browsing On

BrowseProtocols cups

BrowseOrder Deny,Allow

BrowseAllow from @LOCAL

BrowseAddress 255.255.255.255

Listen *:631

-------------------------

J'arrive a imprimer depuis linux :

My Webpage Section imprimante

Sous windows xp voici ce que j'ai:

My Webpage Section Lien 1

Lorsque je veux imprimer, rien ne se passe:

Rien dans la file d'attente de la fenetre windows XP

Les drivers ont été installer sur chaque poste xp avec bien du mal.

De plus j'ai essayer les drivers adobe postcript mais tjs rien.

La je suis perdu , merci de votre aide

De plus qu'est ce que cela signifie:

Server's Role (logon server) NOT ADVISED with domain-level security

Loaded services file OK.

Merci

[zoto]

Salut

Tu utilise cups donc j'ai une astuce pour toi tester sous windows 2000 avec serveur debian sarge.

En fait il faut créer un classe dans cups pour ton imprimante .

Puis dans le fichier host windows qui se trouve dans \windows\system32\drivers\

Tu rentre l'url du serveur et l'url de la classe .

Une fois que tu as fait ça, tu suis la procedure d'installation d'une nouvelle imprimante .

Au moment de rentrer la localisation de l'imprimante tu donne l'urls de la classe du style :

http://192.168.0.10/monimprimante .

Il te faut les driver windows de l'imprimante car apres cela windows va te les demander :)

sinon je te recherche la doc qui m'a permis de faire passer cette astuce :)

a+

ps : voici la fameuse doc : http://www.owlfish.com/thoughts/winipp-cups-2003-07-20.html

[rjcb]

Salut,

Je comprends pas que mon http://192.168.2.2:631/ ne donne rien alors que j'ai désactiver le firewall.

[zoto]

salut

Faut donner l'addresse exact de la classe, cf la doc :

http://rock:631/classes/Home

Sinon es tu sur que ça marche ton serveur cups ?

Si tu as une autre machine linux qui peut etre cliente, essaie de faire tourner l'imprimante avec .

a+

ps : met

listen 192.168.0.0/24

[rjcb]

Salut,

Donc ss linux j'arrive enfin a accéder a http://192.168.2.2:631

j'ai donc créer une classe printer

lorsque je veux ajouter une imprimante ss xp avec cette @

http://192.168.2.2:631/classes/printer

Il me dit qu'il ne peut pas accéder a l'imprimante.

Mais ce que je ne comprends pas, c'est que si je tappe http://192.168.2.2:631 depuis un poste de mon réseaux local, impossible d'afficher la page alors que le poste linux ou se trouve l'imprimante a le fireall désactiver

bizarre non ?

[zoto]

Salut

verifie les droit d'acces de ton cups .

Il y a de grand chance que l'on puisse y acceder qu'en local .

Edite le fichier cups.conf et dit a cups d'etre dispo pour tous ton reseaux .

a+

[rjcb]

oui c'est ce que j'ai fais je pense:

le pc client qui veux accéder a l'imprimante a l'@ ip 192.168.1.2

#

# "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $"

#

# Sample configuration file for the Common UNIX Printing System (CUPS)

# scheduler.

#

# Copyright 1997-2005 by Easy Software Products, all rights reserved.

#

# These coded instructions, statements, and computer programs are the

# property of Easy Software Products and are protected by Federal

# copyright law. Distribution and use rights are outlined in the file

# "LICENSE.txt" which should have been included with this file. If this

# file is missing or damaged please contact Easy Software Products

# at:

#

# Attn: CUPS Licensing Information

# Easy Software Products

# 44141 Airport View Drive, Suite 204

# Hollywood, Maryland 20636 USA

#

# Voice: (301) 373-9600

# EMail: cups-info@cups.org

# WWW: http://www.cups.org

#

########################################################################

# #

# This is the CUPS configuration file. If you are familiar with #

# Apache or any of the other popular web servers, we've followed the #

# same format. Any configuration variable used here has the same #

# semantics as the corresponding variable in Apache. If we need #

# different functionality then a different name is used to avoid #

# confusion... #

# #

########################################################################

########

######## Server Identity

########

#

# ServerName: the hostname of your server, as advertised to the world.

# By default CUPS will use the hostname of the system.

#

# To set the default server used by clients, see the client.conf file.

#

#ServerName myhost.domain.com

#

# ServerAdmin: the email address to send all complaints/problems to.

# By default CUPS will use "root@hostname".

#

#ServerAdmin root@your.domain.com

########

######## Server Options

########

#

# AccessLog: the access log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/access_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#AccessLog /var/log/cups/access_log

#

# Classification: the classification level of the server. If set, this

# classification is displayed on all pages, and raw printing is disabled.

# The default is the empty string.

#

#Classification classified

#Classification confidential

#Classification secret

#Classification topsecret

#Classification unclassified

#

# ClassifyOverride: whether to allow users to override the classification

# on printouts. If enabled, users can limit banner pages to before or

# after the job, and can change the classification of a job, but cannot

# completely eliminate the classification or banners.

#

# The default is off.

#

#ClassifyOverride off

#

# DataDir: the root directory for the CUPS data files.

# By default "/usr/share/cups".

#

#DataDir /usr/share/cups

#

# DefaultCharset: the default character set to use. If not specified,

# defaults to "utf-8". Note that this can also be overridden in

# HTML documents...

#

#DefaultCharset utf-8

#

# DefaultLanguage: the default language if not specified by the browser.

# If not specified, the current locale is used.

#

#DefaultLanguage en

#

# DocumentRoot: the root directory for HTTP documents that are served.

# By default "/usr/share/doc/cups-1.1.23".

#

#DocumentRoot /usr/share/doc/cups-1.1.23

#

# ErrorLog: the error log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/error_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#ErrorLog /var/log/cups/error_log

# LogFilePerm: determines the file mode to set log files to.

#

LogFilePerm 0600

#

# FileDevice: determines whether the scheduler will allow new printers

# to be added using device URIs of the form "file:/foo/bar". The default

# is not to allow file devices due to the potential security vulnerability

# and due to the fact that file devices do not support raw printing.

#

#FileDevice No

#

# FontPath: the path to locate all font files (currently only for pstoraster)

# By default "/usr/share/cups/fonts".

#

#FontPath /usr/share/cups/fonts

#

# LogLevel: controls the number of messages logged to the ErrorLog

# file and can be one of the following:

#

# debug2 Log everything.

# debug Log almost everything.

# info Log all requests and state changes.

# warn Log errors and warnings.

# error Log only errors.

# none Log nothing.

#

MaxLogSize 2000000000

LogLevel info

#

# MaxLogSize: controls the maximum size of each log file before they are

# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

#

#MaxLogSize 0

#

# PageLog: the page log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/page_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#PageLog /var/log/cups/page_log

#

# PreserveJobHistory: whether or not to preserve the job history after a

# job is completed, cancelled, or stopped. Default is Yes.

#

#PreserveJobHistory Yes

#

# PreserveJobFiles: whether or not to preserve the job files after a

# job is completed, cancelled, or stopped. Default is No.

#

#PreserveJobFiles No

#

# AutoPurgeJobs: automatically purge jobs when not needed for quotas.

# Default is No.

#

#AutoPurgeJobs No

#

# MaxCopies: maximum number of copies that a user can request. Default is

# 100.

#

#MaxCopies 100

#

# MaxJobs: maximum number of jobs to keep in memory (active and completed.)

# Default is 500; the value 0 is used for no limit.

#

#MaxJobs 500

#

# MaxJobsPerPrinter: maximum number of active jobs per printer. The default

# is 0 for no limit.

#

#MaxJobsPerPrinter 0

#

# MaxJobsPerUser: maximum number of active jobs per user. The default

# is 0 for no limit.

#

#MaxJobsPerUser 0

#

# MaxPrinterHistory: controls the maximum number of history collections

# in the printer-state-history attribute. Set to 0 to disable history

# data.

#

#MaxPrinterHistory 10

#

# Printcap: the name of the printcap file. Default is /etc/printcap.

# Leave blank to disable printcap file generation.

#

Printcap /etc/printcap

#

# PrintcapFormat: the format of the printcap file, currently either

# BSD or Solaris. The default is "BSD".

#

#PrintcapFormat BSD

#PrintcapFormat Solaris

#

# PrintcapGUI: the name of the GUI options panel program to associate

# with print queues under IRIX. The default is "/usr/bin/glpoptions"

# from ESP Print Pro.

#

# This option is only used under IRIX; the options panel program

# must accept the "-d printer" and "-o options" options and write

# the selected printer options back to stdout on completion.

#

#PrintcapGUI /usr/bin/glpoptions

#

# RequestRoot: the directory where request files are stored.

# By default "/var/spool/cups".

#

#RequestRoot /var/spool/cups

#

# RemoteRoot: the name of the user assigned to unauthenticated accesses

# from remote systems. By default "remroot".

#

#RemoteRoot remroot

#

# ServerBin: the root directory for the scheduler executables.

# By default "/usr/lib/cups".

#

#ServerBin /usr/lib/cups

#

# ServerRoot: the root directory for the scheduler.

# By default "/etc/cups".

#

#ServerRoot /etc/cups

#

# ServerTokens: specifies what information in provided in the Server

# header of HTTP responses. The default is Minor.

#

# ServerTokens None

# ServerTokens ProductOnly CUPS

# ServerTokens Major CUPS/1

# ServerTokens Minor CUPS/1.1

# ServerTokens Minimal CUPS/1.1.23

# ServerTokens OS CUPS/1.1.23 (uname)

# ServerTokens Full CUPS/1.1.23 (uname) IPP/1.1

#

#ServerTokens Minor

########

######## Fax Support

########

#

# FaxRetryLimit: the number of times a fax job is retried.

# The default is 5 times.

#

#FaxRetryLimit 5

#

# FaxRetryInterval: the number of seconds between fax job retries.

# The default is 300 seconds/5 minutes.

#

#FaxRetryInterval 300

########

######## Encryption Support

########

#

# ServerCertificate: the file to read containing the server's certificate.

# Defaults to "/etc/cups/ssl/server.crt".

#

#ServerCertificate /etc/cups/ssl/server.crt

#

# ServerKey: the file to read containing the server's key.

# Defaults to "/etc/cups/ssl/server.key".

#

#ServerKey /etc/cups/ssl/server.key

########

######## Filter Options

########

#

# User/Group: the user and group the server runs under. Normally this

# must be lp and sys, however you can configure things for another

# user or group as needed.

#

# Note: the server must be run initially as root to support the

# default IPP port of 631. It changes users whenever an external

# program is run, or if the RunAsUser directive is specified...

#

#User lp

#Group sys

#

# RIPCache: the amount of memory that each RIP should use to cache

# bitmaps. The value can be any real number followed by "k" for

# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles

# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).

#

#RIPCache 8m

#

# TempDir: the directory to put temporary files in. This directory must be

# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or

# the value of the TMPDIR environment variable.

#

#TempDir /var/spool/cups/tmp

#

# FilterLimit: sets the maximum cost of all job filters that can be run

# at the same time. A limit of 0 means no limit. A typical job may need

# a filter limit of at least 200; limits less than the minimum required

# by a job force a single job to be printed at any time.

#

# The default limit is 0 (unlimited).

#

#FilterLimit 0

########

######## Network Options

########

#

# Ports/addresses that we listen to. The default port 631 is reserved

# for the Internet Printing Protocol (IPP) and is what we use here.

#

# You can have multiple Port/Listen lines to listen to more than one

# port or address, or to restrict access:

#

# Port 80

# Port 631

# Listen hostname

# Listen hostname:80

# Listen hostname:631

# Listen 1.2.3.4

# Listen 1.2.3.4:631

#

# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades

# for encryption. If you want to support web-based encryption you'll

# probably need to listen on port 443 (the "https" port...)

#

# NOTE 2: In order for the command-line and web interfaces to work, you

# must have at least one Port or Listen line that allows access from the

# local loopback address (localhost).

#

#Port 80

#Port 443

#

# HostNameLookups: whether or not to do lookups on IP addresses to get a

# fully-qualified hostname. This defaults to Off for performance reasons...

#

#HostNameLookups On

#

# KeepAlive: whether or not to support the Keep-Alive connection

# option. Default is on.

#

#KeepAlive On

#

# KeepAliveTimeout: the timeout before Keep-Alive connections are

# automatically closed. Default is 60 seconds.

#

#KeepAliveTimeout 60

#

# MaxClients: controls the maximum number of simultaneous clients that

# will be handled. Defaults to 100.

#

#MaxClients 100

#

# MaxClientsPerHost: controls the maximum number of simultaneous clients that

# will be handled from a specific host. Defaults to 10 or 1/10th of the

# MaxClients setting, whichever is larger. A value of 0 specifies the

# automatic (10 or 1/10th) setting.

#

#MaxClientsPerHost 0

#

# MaxRequestSize: controls the maximum size of HTTP requests and print files.

# Set to 0 to disable this feature (defaults to 0.)

#

#MaxRequestSize 0

#

# Timeout: the timeout before requests time out. Default is 300 seconds.

#

#Timeout 300

########

######## Browsing Options

########

#

# Browsing: whether or not to broadcast and/or listen for CUPS printer

# information on the network. Enabled by default.

#

#Browsing On

#

# BrowseProtocols: which protocols to use for browsing. Can be

# any of the following separated by whitespace and/or commas:

#

# all - Use all supported protocols.

# cups - Use the CUPS browse protocol.

# slp - Use the SLPv2 protocol.

#

# The default is "cups".

#

# NOTE: If you choose to use SLPv2, it is *strongly* recommended that

# you have at least one SLP Directory Agent (DA) on your

# network. Otherwise, browse updates can take several seconds,

# during which the scheduler will not respond to client

# requests.

#

#BrowseProtocols cups

#

# BrowseAddress: specifies a broadcast address to be used. By

# default browsing information is not sent!

#

# Note: HP-UX does not properly handle broadcast unless you have a

# Class A, B, C, or D netmask (i.e. no CIDR support).

#

# Note: Using the "global" broadcast address (255.255.255.255) will

# activate a Linux demand-dial link with the default configuration.

# If you have a LAN as well as the dial-up link, use the LAN's

# broadcast address.

#

# The @LOCAL address broadcasts to all non point-to-point interfaces.

# For example, if you have a LAN and a dial-up link, @LOCAL would

# send printer updates to the LAN but not to the dial-up link.

# Similarly, the @IF(name) address sends to the named network

# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed

# automatically (no more than once every 60 seconds), so they can

# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.

#

#BrowseAddress x.y.z.255

#BrowseAddress x.y.255.255

#BrowseAddress x.255.255.255

#BrowseAddress 255.255.255.255

#BrowseAddress @LOCAL

#BrowseAddress @IF(name)

#

# BrowseShortNames: whether or not to use "short" names for remote printers

# when possible (e.g. "printer" instead of "printer@host".) Enabled by

# default.

#

#BrowseShortNames Yes

#

# BrowseAllow: specifies an address mask to allow for incoming browser

# packets. The default is to allow packets from all addresses.

#

# BrowseDeny: specifies an address mask to deny for incoming browser

# packets. The default is to deny packets from no addresses.

#

# Both "BrowseAllow" and "BrowseDeny" accept the following notations for

# addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The hostname/domainname restrictions only work if you have turned hostname

# lookups on!

#

#BrowseAllow address

#BrowseDeny address

#

# BrowseInterval: the time between browsing updates in seconds. Default

# is 30 seconds.

#

# Note that browsing information is sent whenever a printer's state changes

# as well, so this represents the maximum time between updates.

#

# Set this to 0 to disable outgoing broadcasts so your local printers are

# not advertised but you can still see printers on other hosts.

#

#BrowseInterval 30

#

# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.

#

#BrowseOrder allow,deny

#BrowseOrder deny,allow

#

# BrowsePoll: poll the named server(s) for printers

#

#BrowsePoll address:port

#

# BrowsePort: the port used for UDP broadcasts. By default this is

# the IPP port; if you change this you need to do it on all servers.

# Only one BrowsePort is recognized.

#

BrowsePort 631

#

# BrowseRelay: relay browser packets from one address/network to another.

#

#BrowseRelay source-address destination-address

#BrowseRelay @IF(src) @IF(dst)

#

# BrowseTimeout: the timeout for network printers - if we don't

# get an update within this time the printer will be removed

# from the printer list. This number definitely should not be

# less the BrowseInterval value for obvious reasons. Defaults

# to 300 seconds.

#

#BrowseTimeout 300

#

# ImplicitClasses: whether or not to use implicit classes.

#

# Printer classes can be specified explicitly in the classes.conf

# file, implicitly based upon the printers available on the LAN, or

# both.

#

# When ImplicitClasses is On, printers on the LAN with the same name

# (e.g. Acme-LaserPrint-1000) will be put into a class with the same

# name. This allows you to setup multiple redundant queues on a LAN

# without a lot of administrative difficulties. If a user sends a

# job to Acme-LaserPrint-1000, the job will go to the first available

# queue.

#

# Enabled by default.

#

#ImplicitClasses On

#

# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit

# classes.

#

# When ImplicitAnyClasses is On and a local queue of the same name

# exists, e.g. "printer", "printer@server1", "printer@server1", then

# an implicit class called "Anyprinter" is created instead.

#

# When ImplicitAnyClasses is Off, implicit classes are not created

# when there is a local queue of the same name.

#

# Disabled by default.

#

#ImplicitAnyCLasses Off

#

# HideImplicitMembers: whether or not to show the members of an

# implicit class.

#

# When HideImplicitMembers is On, any remote printers that are

# part of an implicit class are hidden from the user, who will

# then only see a single queue even though many queues will be

# supporting the implicit class.

#

# Enabled by default.

#

#HideImplicitMembers On

########

######## Security Options

########

#

# SystemGroup: the group name for "System" (printer administration)

# access. The default varies depending on the operating system, but

# will be "sys", "system", or "root" (checked for in that order.)

#

#SystemGroup sys

#

# RootCertDuration: How frequently the root certificate is regenerated.

# Defaults to 300 seconds.

#

#RootCertDuration 300

#

# Access permissions for each directory served by the scheduler.

# Locations are relative to DocumentRoot...

#

# AuthType: the authorization to use:

#

# None - Perform no authentication

# Basic - Perform authentication using the HTTP Basic method.

# Digest - Perform authentication using the HTTP Digest method.

#

# (Note: local certificate authentication can be substituted by

# the client for Basic or Digest when connecting to the

# localhost interface)

#

# AuthClass: the authorization class; currently only "Anonymous", "User",

# "System" (valid user belonging to group SystemGroup), and "Group"

# (valid user belonging to the specified group) are supported.

#

# AuthGroupName: the group name for "Group" authorization.

#

# Order: the order of Allow/Deny processing.

#

# Allow: allows access from the specified hostname, domain, IP address,

# network, or interface.

#

# Deny: denies access from the specified hostname, domain, IP address,

# network, or interface.

#

# Both "Allow" and "Deny" accept the following notations for addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The host and domain address require that you enable hostname lookups

# with "HostNameLookups On" above.

#

# The @LOCAL address allows or denies from all non point-to-point

# interfaces. For example, if you have a LAN and a dial-up link,

# @LOCAL could allow connections from the LAN but not from the dial-up

# link. Similarly, the @IF(name) address allows or denies from the

# named network interface, e.g. @IF(eth0) under Linux. Interfaces are

# refreshed automatically (no more than once every 60 seconds), so

# they can be used on dynamically-configured interfaces, e.g. PPP,

# 802.11, etc.

#

# Encryption: whether or not to use encryption; this depends on having

# the OpenSSL library linked into the CUPS library and scheduler.

#

# Possible values:

#

# Always - Always use encryption (SSL)

# Never - Never use encryption

# Required - Use TLS encryption upgrade

# IfRequested - Use encryption if the server requests it

#

# The default value is "IfRequested".

#

<Location />

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

</Location>

#<Location /classes>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /classes/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /jobs>

#

# You may wish to limit access to job operations, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

## Anonymous access (default)

#AuthType None

## Require a username and password (Basic authentication)

#AuthType Basic

#AuthClass User

## Require a username and password (Digest/MD5 authentication)

#AuthType Digest

#AuthClass User

## Restrict access to local domain

#Order Deny,Allow

#Deny From All

#Allow From .mydomain.com

#</Location>

<Location /admin>

#

# You definitely will want to limit access to the administration functions.

# The default configuration requires a local connection from a user who

# is a member of the system group to do any admin tasks. You can change

# the group name using the SystemGroup directive.

#

AuthType Basic

AuthClass System

## Restrict access to local domain

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.2

#Encryption Required

</Location>

#

# End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $".

#

<Location /printers/printers>

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.2

AuthType None

Allow from All

</Location>

<Location /printers/printer>

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

AuthType None

Allow from All

</Location>

# Lines below are automatically generated - DO NOT EDIT

<Location /printers/hpimp>

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.2

AuthType None

</Location>

Browsing On

BrowseProtocols cups

BrowseOrder Deny,Allow

BrowseAllow from @LOCAL

Listen 127.0.0.1:631

Merci

[zoto]

salut

<Location /printers/printers>
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
Allow From 192.168.1.2
AuthType None
Allow from All
</Location>

le Deny From ALL le Allow from all dans la même directive je ne trouve pas ça tres logique

Ensuiite tu as :

# End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $".
#

Tu es sur que ce qui est aprés est pris en compte ?

Moi j'aurais mis les modife avant .

Certain fichier de conf linux on une structure specifique .

Sinon j'ai regarder dans mon cupsd.conf, j'ai pas my from all mais from @LOCAL

Donc je te conseil de remplacer :

Allow From 192.168.1.2

Par

Allow From @LOCAL

et de redemarré cups:)

a+

[rjcb]

Salut,

voici mon fichier de config modifié

#

# "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $"

#

# Sample configuration file for the Common UNIX Printing System (CUPS)

# scheduler.

#

# Copyright 1997-2005 by Easy Software Products, all rights reserved.

#

# These coded instructions, statements, and computer programs are the

# property of Easy Software Products and are protected by Federal

# copyright law. Distribution and use rights are outlined in the file

# "LICENSE.txt" which should have been included with this file. If this

# file is missing or damaged please contact Easy Software Products

# at:

#

# Attn: CUPS Licensing Information

# Easy Software Products

# 44141 Airport View Drive, Suite 204

# Hollywood, Maryland 20636 USA

#

# Voice: (301) 373-9600

# EMail: cups-info@cups.org

# WWW: http://www.cups.org

#

########################################################################

# #

# This is the CUPS configuration file. If you are familiar with #

# Apache or any of the other popular web servers, we've followed the #

# same format. Any configuration variable used here has the same #

# semantics as the corresponding variable in Apache. If we need #

# different functionality then a different name is used to avoid #

# confusion... #

# #

########################################################################

########

######## Server Identity

########

#

# ServerName: the hostname of your server, as advertised to the world.

# By default CUPS will use the hostname of the system.

#

# To set the default server used by clients, see the client.conf file.

#

ServerName 192.168.2.2

#

# ServerAdmin: the email address to send all complaints/problems to.

# By default CUPS will use "root@hostname".

#

#ServerAdmin root@your.domain.com

########

######## Server Options

########

#

# AccessLog: the access log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/access_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#AccessLog /var/log/cups/access_log

#

# Classification: the classification level of the server. If set, this

# classification is displayed on all pages, and raw printing is disabled.

# The default is the empty string.

#

#Classification classified

#Classification confidential

#Classification secret

#Classification topsecret

#Classification unclassified

#

# ClassifyOverride: whether to allow users to override the classification

# on printouts. If enabled, users can limit banner pages to before or

# after the job, and can change the classification of a job, but cannot

# completely eliminate the classification or banners.

#

# The default is off.

#

#ClassifyOverride off

#

# DataDir: the root directory for the CUPS data files.

# By default "/usr/share/cups".

#

#DataDir /usr/share/cups

#

# DefaultCharset: the default character set to use. If not specified,

# defaults to "utf-8". Note that this can also be overridden in

# HTML documents...

#

#DefaultCharset utf-8

#

# DefaultLanguage: the default language if not specified by the browser.

# If not specified, the current locale is used.

#

#DefaultLanguage en

#

# DocumentRoot: the root directory for HTTP documents that are served.

# By default "/usr/share/doc/cups-1.1.23".

#

#DocumentRoot /usr/share/doc/cups-1.1.23

#

# ErrorLog: the error log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/error_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#ErrorLog /var/log/cups/error_log

# LogFilePerm: determines the file mode to set log files to.

#

LogFilePerm 0600

#

# FileDevice: determines whether the scheduler will allow new printers

# to be added using device URIs of the form "file:/foo/bar". The default

# is not to allow file devices due to the potential security vulnerability

# and due to the fact that file devices do not support raw printing.

#

#FileDevice No

#

# FontPath: the path to locate all font files (currently only for pstoraster)

# By default "/usr/share/cups/fonts".

#

#FontPath /usr/share/cups/fonts

#

# LogLevel: controls the number of messages logged to the ErrorLog

# file and can be one of the following:

#

# debug2 Log everything.

# debug Log almost everything.

# info Log all requests and state changes.

# warn Log errors and warnings.

# error Log only errors.

# none Log nothing.

#

MaxLogSize 2000000000

LogLevel info

#

# MaxLogSize: controls the maximum size of each log file before they are

# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

#

#MaxLogSize 0

#

# PageLog: the page log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/page_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#PageLog /var/log/cups/page_log

#

# PreserveJobHistory: whether or not to preserve the job history after a

# job is completed, cancelled, or stopped. Default is Yes.

#

#PreserveJobHistory Yes

#

# PreserveJobFiles: whether or not to preserve the job files after a

# job is completed, cancelled, or stopped. Default is No.

#

#PreserveJobFiles No

#

# AutoPurgeJobs: automatically purge jobs when not needed for quotas.

# Default is No.

#

#AutoPurgeJobs No

#

# MaxCopies: maximum number of copies that a user can request. Default is

# 100.

#

#MaxCopies 100

#

# MaxJobs: maximum number of jobs to keep in memory (active and completed.)

# Default is 500; the value 0 is used for no limit.

#

#MaxJobs 500

#

# MaxJobsPerPrinter: maximum number of active jobs per printer. The default

# is 0 for no limit.

#

#MaxJobsPerPrinter 0

#

# MaxJobsPerUser: maximum number of active jobs per user. The default

# is 0 for no limit.

#

#MaxJobsPerUser 0

#

# MaxPrinterHistory: controls the maximum number of history collections

# in the printer-state-history attribute. Set to 0 to disable history

# data.

#

#MaxPrinterHistory 10

#

# Printcap: the name of the printcap file. Default is /etc/printcap.

# Leave blank to disable printcap file generation.

#

Printcap /etc/printcap

#

# PrintcapFormat: the format of the printcap file, currently either

# BSD or Solaris. The default is "BSD".

#

#PrintcapFormat BSD

#PrintcapFormat Solaris

#

# PrintcapGUI: the name of the GUI options panel program to associate

# with print queues under IRIX. The default is "/usr/bin/glpoptions"

# from ESP Print Pro.

#

# This option is only used under IRIX; the options panel program

# must accept the "-d printer" and "-o options" options and write

# the selected printer options back to stdout on completion.

#

#PrintcapGUI /usr/bin/glpoptions

#

# RequestRoot: the directory where request files are stored.

# By default "/var/spool/cups".

#

#RequestRoot /var/spool/cups

#

# RemoteRoot: the name of the user assigned to unauthenticated accesses

# from remote systems. By default "remroot".

#

#RemoteRoot remroot

#

# ServerBin: the root directory for the scheduler executables.

# By default "/usr/lib/cups".

#

#ServerBin /usr/lib/cups

#

# ServerRoot: the root directory for the scheduler.

# By default "/etc/cups".

#

#ServerRoot /etc/cups

#

# ServerTokens: specifies what information in provided in the Server

# header of HTTP responses. The default is Minor.

#

# ServerTokens None

# ServerTokens ProductOnly CUPS

# ServerTokens Major CUPS/1

# ServerTokens Minor CUPS/1.1

# ServerTokens Minimal CUPS/1.1.23

# ServerTokens OS CUPS/1.1.23 (uname)

# ServerTokens Full CUPS/1.1.23 (uname) IPP/1.1

#

#ServerTokens Minor

########

######## Fax Support

########

#

# FaxRetryLimit: the number of times a fax job is retried.

# The default is 5 times.

#

#FaxRetryLimit 5

#

# FaxRetryInterval: the number of seconds between fax job retries.

# The default is 300 seconds/5 minutes.

#

#FaxRetryInterval 300

########

######## Encryption Support

########

#

# ServerCertificate: the file to read containing the server's certificate.

# Defaults to "/etc/cups/ssl/server.crt".

#

#ServerCertificate /etc/cups/ssl/server.crt

#

# ServerKey: the file to read containing the server's key.

# Defaults to "/etc/cups/ssl/server.key".

#

#ServerKey /etc/cups/ssl/server.key

########

######## Filter Options

########

#

# User/Group: the user and group the server runs under. Normally this

# must be lp and sys, however you can configure things for another

# user or group as needed.

#

# Note: the server must be run initially as root to support the

# default IPP port of 631. It changes users whenever an external

# program is run, or if the RunAsUser directive is specified...

#

#User lp

#Group sys

#

# RIPCache: the amount of memory that each RIP should use to cache

# bitmaps. The value can be any real number followed by "k" for

# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles

# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).

#

#RIPCache 8m

#

# TempDir: the directory to put temporary files in. This directory must be

# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or

# the value of the TMPDIR environment variable.

#

#TempDir /var/spool/cups/tmp

#

# FilterLimit: sets the maximum cost of all job filters that can be run

# at the same time. A limit of 0 means no limit. A typical job may need

# a filter limit of at least 200; limits less than the minimum required

# by a job force a single job to be printed at any time.

#

# The default limit is 0 (unlimited).

#

#FilterLimit 0

########

######## Network Options

########

#

# Ports/addresses that we listen to. The default port 631 is reserved

# for the Internet Printing Protocol (IPP) and is what we use here.

#

# You can have multiple Port/Listen lines to listen to more than one

# port or address, or to restrict access:

#

# Port 80

# Port 631

# Listen hostname

# Listen hostname:80

# Listen hostname:631

# Listen 1.2.3.4

# Listen 1.2.3.4:631

#

# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades

# for encryption. If you want to support web-based encryption you'll

# probably need to listen on port 443 (the "https" port...)

#

# NOTE 2: In order for the command-line and web interfaces to work, you

# must have at least one Port or Listen line that allows access from the

# local loopback address (localhost).

#

#Port 80

#Port 443

#

# HostNameLookups: whether or not to do lookups on IP addresses to get a

# fully-qualified hostname. This defaults to Off for performance reasons...

#

#HostNameLookups On

#

# KeepAlive: whether or not to support the Keep-Alive connection

# option. Default is on.

#

#KeepAlive On

#

# KeepAliveTimeout: the timeout before Keep-Alive connections are

# automatically closed. Default is 60 seconds.

#

#KeepAliveTimeout 60

#

# MaxClients: controls the maximum number of simultaneous clients that

# will be handled. Defaults to 100.

#

#MaxClients 100

#

# MaxClientsPerHost: controls the maximum number of simultaneous clients that

# will be handled from a specific host. Defaults to 10 or 1/10th of the

# MaxClients setting, whichever is larger. A value of 0 specifies the

# automatic (10 or 1/10th) setting.

#

#MaxClientsPerHost 0

#

# MaxRequestSize: controls the maximum size of HTTP requests and print files.

# Set to 0 to disable this feature (defaults to 0.)

#

#MaxRequestSize 0

#

# Timeout: the timeout before requests time out. Default is 300 seconds.

#

#Timeout 300

########

######## Browsing Options

########

#

# Browsing: whether or not to broadcast and/or listen for CUPS printer

# information on the network. Enabled by default.

#

#Browsing On

#

# BrowseProtocols: which protocols to use for browsing. Can be

# any of the following separated by whitespace and/or commas:

#

# all - Use all supported protocols.

# cups - Use the CUPS browse protocol.

# slp - Use the SLPv2 protocol.

#

# The default is "cups".

#

# NOTE: If you choose to use SLPv2, it is *strongly* recommended that

# you have at least one SLP Directory Agent (DA) on your

# network. Otherwise, browse updates can take several seconds,

# during which the scheduler will not respond to client

# requests.

#

#BrowseProtocols cups

#

# BrowseAddress: specifies a broadcast address to be used. By

# default browsing information is not sent!

#

# Note: HP-UX does not properly handle broadcast unless you have a

# Class A, B, C, or D netmask (i.e. no CIDR support).

#

# Note: Using the "global" broadcast address (255.255.255.255) will

# activate a Linux demand-dial link with the default configuration.

# If you have a LAN as well as the dial-up link, use the LAN's

# broadcast address.

#

# The @LOCAL address broadcasts to all non point-to-point interfaces.

# For example, if you have a LAN and a dial-up link, @LOCAL would

# send printer updates to the LAN but not to the dial-up link.

# Similarly, the @IF(name) address sends to the named network

# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed

# automatically (no more than once every 60 seconds), so they can

# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.

#

#BrowseAddress x.y.z.255

#BrowseAddress x.y.255.255

#BrowseAddress x.255.255.255

#BrowseAddress 255.255.255.255

#BrowseAddress @LOCAL

#BrowseAddress @IF(name)

#

# BrowseShortNames: whether or not to use "short" names for remote printers

# when possible (e.g. "printer" instead of "printer@host".) Enabled by

# default.

#

#BrowseShortNames Yes

#

# BrowseAllow: specifies an address mask to allow for incoming browser

# packets. The default is to allow packets from all addresses.

#

# BrowseDeny: specifies an address mask to deny for incoming browser

# packets. The default is to deny packets from no addresses.

#

# Both "BrowseAllow" and "BrowseDeny" accept the following notations for

# addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The hostname/domainname restrictions only work if you have turned hostname

# lookups on!

#

#BrowseAllow address

#BrowseDeny address

#

# BrowseInterval: the time between browsing updates in seconds. Default

# is 30 seconds.

#

# Note that browsing information is sent whenever a printer's state changes

# as well, so this represents the maximum time between updates.

#

# Set this to 0 to disable outgoing broadcasts so your local printers are

# not advertised but you can still see printers on other hosts.

#

#BrowseInterval 30

#

# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.

#

#BrowseOrder allow,deny

#BrowseOrder deny,allow

#

# BrowsePoll: poll the named server(s) for printers

#

#BrowsePoll address:port

#

# BrowsePort: the port used for UDP broadcasts. By default this is

# the IPP port; if you change this you need to do it on all servers.

# Only one BrowsePort is recognized.

#

BrowsePort 631

#

# BrowseRelay: relay browser packets from one address/network to another.

#

#BrowseRelay source-address destination-address

#BrowseRelay @IF(src) @IF(dst)

#

# BrowseTimeout: the timeout for network printers - if we don't

# get an update within this time the printer will be removed

# from the printer list. This number definitely should not be

# less the BrowseInterval value for obvious reasons. Defaults

# to 300 seconds.

#

#BrowseTimeout 300

#

# ImplicitClasses: whether or not to use implicit classes.

#

# Printer classes can be specified explicitly in the classes.conf

# file, implicitly based upon the printers available on the LAN, or

# both.

#

# When ImplicitClasses is On, printers on the LAN with the same name

# (e.g. Acme-LaserPrint-1000) will be put into a class with the same

# name. This allows you to setup multiple redundant queues on a LAN

# without a lot of administrative difficulties. If a user sends a

# job to Acme-LaserPrint-1000, the job will go to the first available

# queue.

#

# Enabled by default.

#

#ImplicitClasses On

#

# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit

# classes.

#

# When ImplicitAnyClasses is On and a local queue of the same name

# exists, e.g. "printer", "printer@server1", "printer@server1", then

# an implicit class called "Anyprinter" is created instead.

#

# When ImplicitAnyClasses is Off, implicit classes are not created

# when there is a local queue of the same name.

#

# Disabled by default.

#

#ImplicitAnyCLasses Off

#

# HideImplicitMembers: whether or not to show the members of an

# implicit class.

#

# When HideImplicitMembers is On, any remote printers that are

# part of an implicit class are hidden from the user, who will

# then only see a single queue even though many queues will be

# supporting the implicit class.

#

# Enabled by default.

#

#HideImplicitMembers On

########

######## Security Options

########

#

# SystemGroup: the group name for "System" (printer administration)

# access. The default varies depending on the operating system, but

# will be "sys", "system", or "root" (checked for in that order.)

#

#SystemGroup sys

#

# RootCertDuration: How frequently the root certificate is regenerated.

# Defaults to 300 seconds.

#

#RootCertDuration 300

#

# Access permissions for each directory served by the scheduler.

# Locations are relative to DocumentRoot...

#

# AuthType: the authorization to use:

#

# None - Perform no authentication

# Basic - Perform authentication using the HTTP Basic method.

# Digest - Perform authentication using the HTTP Digest method.

#

# (Note: local certificate authentication can be substituted by

# the client for Basic or Digest when connecting to the

# localhost interface)

#

# AuthClass: the authorization class; currently only "Anonymous", "User",

# "System" (valid user belonging to group SystemGroup), and "Group"

# (valid user belonging to the specified group) are supported.

#

# AuthGroupName: the group name for "Group" authorization.

#

# Order: the order of Allow/Deny processing.

#

# Allow: allows access from the specified hostname, domain, IP address,

# network, or interface.

#

# Deny: denies access from the specified hostname, domain, IP address,

# network, or interface.

#

# Both "Allow" and "Deny" accept the following notations for addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The host and domain address require that you enable hostname lookups

# with "HostNameLookups On" above.

#

# The @LOCAL address allows or denies from all non point-to-point

# interfaces. For example, if you have a LAN and a dial-up link,

# @LOCAL could allow connections from the LAN but not from the dial-up

# link. Similarly, the @IF(name) address allows or denies from the

# named network interface, e.g. @IF(eth0) under Linux. Interfaces are

# refreshed automatically (no more than once every 60 seconds), so

# they can be used on dynamically-configured interfaces, e.g. PPP,

# 802.11, etc.

#

# Encryption: whether or not to use encryption; this depends on having

# the OpenSSL library linked into the CUPS library and scheduler.

#

# Possible values:

#

# Always - Always use encryption (SSL)

# Never - Never use encryption

# Required - Use TLS encryption upgrade

# IfRequested - Use encryption if the server requests it

#

# The default value is "IfRequested".

#

<Location />

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

</Location>

#<Location /classes>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /classes/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /jobs>

#

# You may wish to limit access to job operations, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

## Anonymous access (default)

#AuthType None

## Require a username and password (Basic authentication)

#AuthType Basic

#AuthClass User

## Require a username and password (Digest/MD5 authentication)

#AuthType Digest

#AuthClass User

## Restrict access to local domain

#Order Deny,Allow

#Deny From All

#Allow From .mydomain.com

#</Location>

<Location /admin>

#

# You definitely will want to limit access to the administration functions.

# The default configuration requires a local connection from a user who

# is a member of the system group to do any admin tasks. You can change

# the group name using the SystemGroup directive.

#

AuthType Basic

AuthClass System

## Restrict access to local domain

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

#Encryption Required

</Location>

<Location /printers/printer>

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

AuthType None

</Location>

<Location /printers/hpimp>

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

AuthType None

Allow from All

</Location>

Browsing On

BrowseProtocols cups

BrowseOrder Deny,Allow

BrowseAllow from @LOCAL

BrowseAddress 255.255.255.255

Listen *:631

#

# End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $".

#

# Lines below are automatically generated - DO NOT EDIT

J'arrive a accéder a la page par web pour la config depuis un autre poste sur le réseau et d'imprimer une page de test.

Depuis vos postes Win2000/XP : Menu Démarrer > Paramètres > Imprimantes > Ajout d’une nouvelle imprimante > Imprimante Réseau. Dans le champ URL, saisissez http://192.168.2.2:631/classes/printer

Et j'ai essayer cela vu ke j'ai le SP2

Depuis un poste sous WinXP SP1, il doit être possible de ne pas créer de classe et de mettre comme url : http://192.168.2.2:631/printers/hpimp

Mais tjs rien

Merci

[rjcb]

Voici le log que rapporte l'erreur lors d'impression de doc sur le poste client

errorlog

I [25/Sep/2005:23:07:03 +0200] Sending browsing info to ffffffff:631

I [25/Sep/2005:23:07:03 +0200] Listening to 0:631

I [25/Sep/2005:23:07:03 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [25/Sep/2005:23:07:03 +0200] Configured for up to 100 clients.

I [25/Sep/2005:23:07:03 +0200] Allowing up to 100 client connections per host.

I [25/Sep/2005:23:07:03 +0200] Full reload is required.

I [25/Sep/2005:23:07:03 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 15 PPDs...

I [25/Sep/2005:23:07:03 +0200] LoadPPDs: No new or changed PPDs...

I [25/Sep/2005:23:07:03 +0200] Full reload complete.

E [25/Sep/2005:23:07:30 +0200] print_job: No file!?!

Accesslog

192.168.1.2 - - [25/Sep/2005:23:07:17 +0200] "POST /printers/hpimp HTTP/1.1" 200 170

192.168.1.2 - - [25/Sep/2005:23:07:17 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

localhost - - [25/Sep/2005:23:07:18 +0200] "POST / HTTP/1.1" 200 264

localhost - - [25/Sep/2005:23:07:18 +0200] "POST / HTTP/1.1" 200 185

192.168.1.2 - - [25/Sep/2005:23:07:24 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

192.168.1.2 - - [25/Sep/2005:23:07:28 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

192.168.1.2 - - [25/Sep/2005:23:07:30 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

192.168.1.2 - - [25/Sep/2005:23:07:30 +0200] "POST /printers/hpimp HTTP/1.1" 200 170

192.168.1.2 - - [25/Sep/2005:23:07:30 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

192.168.1.2 - - [25/Sep/2005:23:07:30 +0200] "POST /printers/hpimp HTTP/1.1" 200 192

192.168.1.2 - - [25/Sep/2005:23:07:47 +0200] "POST /printers/hpimp HTTP/1.1" 200 170

192.168.1.2 - - [25/Sep/2005:23:07:47 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

localhost - - [25/Sep/2005:23:07:48 +0200] "POST / HTTP/1.1" 200 264

localhost - - [25/Sep/2005:23:07:48 +0200] "POST / HTTP/1.1" 200 185

192.168.1.2 - - [25/Sep/2005:23:07:54 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

192.168.1.2 - - [25/Sep/2005:23:08:17 +0200] "POST /printers/hpimp HTTP/1.1" 200 170

192.168.1.2 - - [25/Sep/2005:23:08:17 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

localhost - - [25/Sep/2005:23:08:18 +0200] "POST / HTTP/1.1" 200 264

localhost - - [25/Sep/2005:23:08:18 +0200] "POST / HTTP/1.1" 200 185

192.168.1.2 - - [25/Sep/2005:23:08:24 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

192.168.1.2 - - [25/Sep/2005:23:08:47 +0200] "POST /printers/hpimp HTTP/1.1" 200 170

192.168.1.2 - - [25/Sep/2005:23:08:47 +0200] "POST /printers/hpimp HTTP/1.1" 200 128

localhost - - [25/Sep/2005:23:08:49 +0200] "POST / HTTP/1.1" 200 264

localhost - - [25/Sep/2005:23:08:49 +0200] "POST / HTTP/1.1" 200 185

Merci

[zoto]

Salut

Regarde aussi du coté de l'option browse access que tous ton réseaux y a acces :)

Pour moi c'est un probleme de droit pas plus .

a+

[rjcb]

Salut,

je ne vois pas trop quoi modifié, j'ai modifié quelques options dans options browse mais sans succès

#

# "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $"

#

# Sample configuration file for the Common UNIX Printing System (CUPS)

# scheduler.

#

# Copyright 1997-2005 by Easy Software Products, all rights reserved.

#

# These coded instructions, statements, and computer programs are the

# property of Easy Software Products and are protected by Federal

# copyright law. Distribution and use rights are outlined in the file

# "LICENSE.txt" which should have been included with this file. If this

# file is missing or damaged please contact Easy Software Products

# at:

#

# Attn: CUPS Licensing Information

# Easy Software Products

# 44141 Airport View Drive, Suite 204

# Hollywood, Maryland 20636 USA

#

# Voice: (301) 373-9600

# EMail: cups-info@cups.org

# WWW: http://www.cups.org

#

########################################################################

# #

# This is the CUPS configuration file. If you are familiar with #

# Apache or any of the other popular web servers, we've followed the #

# same format. Any configuration variable used here has the same #

# semantics as the corresponding variable in Apache. If we need #

# different functionality then a different name is used to avoid #

# confusion... #

# #

########################################################################

########

######## Server Identity

########

#

# ServerName: the hostname of your server, as advertised to the world.

# By default CUPS will use the hostname of the system.

#

# To set the default server used by clients, see the client.conf file.

#

ServerName 192.168.2.2

#

# ServerAdmin: the email address to send all complaints/problems to.

# By default CUPS will use "root@hostname".

#

#ServerAdmin root@your.domain.com

########

######## Server Options

########

#

# AccessLog: the access log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/access_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

AccessLog /var/log/cups/access_log

#

# Classification: the classification level of the server. If set, this

# classification is displayed on all pages, and raw printing is disabled.

# The default is the empty string.

#

#Classification classified

#Classification confidential

#Classification secret

#Classification topsecret

#Classification unclassified

#

# ClassifyOverride: whether to allow users to override the classification

# on printouts. If enabled, users can limit banner pages to before or

# after the job, and can change the classification of a job, but cannot

# completely eliminate the classification or banners.

#

# The default is off.

#

#ClassifyOverride off

#

# DataDir: the root directory for the CUPS data files.

# By default "/usr/share/cups".

#

#DataDir /usr/share/cups

#

# DefaultCharset: the default character set to use. If not specified,

# defaults to "utf-8". Note that this can also be overridden in

# HTML documents...

#

#DefaultCharset utf-8

#

# DefaultLanguage: the default language if not specified by the browser.

# If not specified, the current locale is used.

#

DefaultLanguage fr

#

# DocumentRoot: the root directory for HTTP documents that are served.

# By default "/usr/share/doc/cups-1.1.23".

#

DocumentRoot /usr/share/doc/cups-1.1.23

#

# ErrorLog: the error log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/error_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

ErrorLog /var/log/cups/error_log

# LogFilePerm: determines the file mode to set log files to.

#

LogFilePerm 0600

#

# FileDevice: determines whether the scheduler will allow new printers

# to be added using device URIs of the form "file:/foo/bar". The default

# is not to allow file devices due to the potential security vulnerability

# and due to the fact that file devices do not support raw printing.

#

#FileDevice No

#

# FontPath: the path to locate all font files (currently only for pstoraster)

# By default "/usr/share/cups/fonts".

#

#FontPath /usr/share/cups/fonts

#

# LogLevel: controls the number of messages logged to the ErrorLog

# file and can be one of the following:

#

# debug2 Log everything.

# debug Log almost everything.

# info Log all requests and state changes.

# warn Log errors and warnings.

# error Log only errors.

# none Log nothing.

#

MaxLogSize 2000000000

LogLevel info

#

# MaxLogSize: controls the maximum size of each log file before they are

# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

#

#MaxLogSize 0

#

# PageLog: the page log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/page_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

#PageLog /var/log/cups/page_log

#

# PreserveJobHistory: whether or not to preserve the job history after a

# job is completed, cancelled, or stopped. Default is Yes.

#

#PreserveJobHistory Yes

#

# PreserveJobFiles: whether or not to preserve the job files after a

# job is completed, cancelled, or stopped. Default is No.

#

#PreserveJobFiles No

#

# AutoPurgeJobs: automatically purge jobs when not needed for quotas.

# Default is No.

#

#AutoPurgeJobs No

#

# MaxCopies: maximum number of copies that a user can request. Default is

# 100.

#

#MaxCopies 100

#

# MaxJobs: maximum number of jobs to keep in memory (active and completed.)

# Default is 500; the value 0 is used for no limit.

#

#MaxJobs 500

#

# MaxJobsPerPrinter: maximum number of active jobs per printer. The default

# is 0 for no limit.

#

#MaxJobsPerPrinter 0

#

# MaxJobsPerUser: maximum number of active jobs per user. The default

# is 0 for no limit.

#

#MaxJobsPerUser 0

#

# MaxPrinterHistory: controls the maximum number of history collections

# in the printer-state-history attribute. Set to 0 to disable history

# data.

#

#MaxPrinterHistory 10

#

# Printcap: the name of the printcap file. Default is /etc/printcap.

# Leave blank to disable printcap file generation.

#

Printcap /etc/printcap

#

# PrintcapFormat: the format of the printcap file, currently either

# BSD or Solaris. The default is "BSD".

#

#PrintcapFormat BSD

#PrintcapFormat Solaris

#

# PrintcapGUI: the name of the GUI options panel program to associate

# with print queues under IRIX. The default is "/usr/bin/glpoptions"

# from ESP Print Pro.

#

# This option is only used under IRIX; the options panel program

# must accept the "-d printer" and "-o options" options and write

# the selected printer options back to stdout on completion.

#

#PrintcapGUI /usr/bin/glpoptions

#

# RequestRoot: the directory where request files are stored.

# By default "/var/spool/cups".

#

#RequestRoot /var/spool/cups

#

# RemoteRoot: the name of the user assigned to unauthenticated accesses

# from remote systems. By default "remroot".

#

#RemoteRoot remroot

#

# ServerBin: the root directory for the scheduler executables.

# By default "/usr/lib/cups".

#

#ServerBin /usr/lib/cups

#

# ServerRoot: the root directory for the scheduler.

# By default "/etc/cups".

#

#ServerRoot /etc/cups

#

# ServerTokens: specifies what information in provided in the Server

# header of HTTP responses. The default is Minor.

#

# ServerTokens None

# ServerTokens ProductOnly CUPS

# ServerTokens Major CUPS/1

# ServerTokens Minor CUPS/1.1

# ServerTokens Minimal CUPS/1.1.23

# ServerTokens OS CUPS/1.1.23 (uname)

# ServerTokens Full CUPS/1.1.23 (uname) IPP/1.1

#

#ServerTokens Minor

########

######## Fax Support

########

#

# FaxRetryLimit: the number of times a fax job is retried.

# The default is 5 times.

#

#FaxRetryLimit 5

#

# FaxRetryInterval: the number of seconds between fax job retries.

# The default is 300 seconds/5 minutes.

#

#FaxRetryInterval 300

########

######## Encryption Support

########

#

# ServerCertificate: the file to read containing the server's certificate.

# Defaults to "/etc/cups/ssl/server.crt".

#

#ServerCertificate /etc/cups/ssl/server.crt

#

# ServerKey: the file to read containing the server's key.

# Defaults to "/etc/cups/ssl/server.key".

#

#ServerKey /etc/cups/ssl/server.key

########

######## Filter Options

########

#

# User/Group: the user and group the server runs under. Normally this

# must be lp and sys, however you can configure things for another

# user or group as needed.

#

# Note: the server must be run initially as root to support the

# default IPP port of 631. It changes users whenever an external

# program is run, or if the RunAsUser directive is specified...

#

#User lp

#Group sys

#

# RIPCache: the amount of memory that each RIP should use to cache

# bitmaps. The value can be any real number followed by "k" for

# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles

# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).

#

#RIPCache 8m

#

# TempDir: the directory to put temporary files in. This directory must be

# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or

# the value of the TMPDIR environment variable.

#

TempDir /var/spool/cups/tmp

#

# FilterLimit: sets the maximum cost of all job filters that can be run

# at the same time. A limit of 0 means no limit. A typical job may need

# a filter limit of at least 200; limits less than the minimum required

# by a job force a single job to be printed at any time.

#

# The default limit is 0 (unlimited).

#

#FilterLimit 0

########

######## Network Options

########

#

# Ports/addresses that we listen to. The default port 631 is reserved

# for the Internet Printing Protocol (IPP) and is what we use here.

#

# You can have multiple Port/Listen lines to listen to more than one

# port or address, or to restrict access:

#

# Port 80

# Port 631

# Listen hostname

# Listen hostname:80

# Listen hostname:631

# Listen 1.2.3.4

# Listen 1.2.3.4:631

#

# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades

# for encryption. If you want to support web-based encryption you'll

# probably need to listen on port 443 (the "https" port...)

#

# NOTE 2: In order for the command-line and web interfaces to work, you

# must have at least one Port or Listen line that allows access from the

# local loopback address (localhost).

#

#Port 80

#Port 443

#

# HostNameLookups: whether or not to do lookups on IP addresses to get a

# fully-qualified hostname. This defaults to Off for performance reasons...

#

#HostNameLookups On

#

# KeepAlive: whether or not to support the Keep-Alive connection

# option. Default is on.

#

#KeepAlive On

#

# KeepAliveTimeout: the timeout before Keep-Alive connections are

# automatically closed. Default is 60 seconds.

#

#KeepAliveTimeout 60

#

# MaxClients: controls the maximum number of simultaneous clients that

# will be handled. Defaults to 100.

#

#MaxClients 100

#

# MaxClientsPerHost: controls the maximum number of simultaneous clients that

# will be handled from a specific host. Defaults to 10 or 1/10th of the

# MaxClients setting, whichever is larger. A value of 0 specifies the

# automatic (10 or 1/10th) setting.

#

#MaxClientsPerHost 0

#

# MaxRequestSize: controls the maximum size of HTTP requests and print files.

# Set to 0 to disable this feature (defaults to 0.)

#

#MaxRequestSize 0

#

# Timeout: the timeout before requests time out. Default is 300 seconds.

#

#Timeout 300

########

######## Browsing Options

########

#

# Browsing: whether or not to broadcast and/or listen for CUPS printer

# information on the network. Enabled by default.

#

Browsing On

#

# BrowseProtocols: which protocols to use for browsing. Can be

# any of the following separated by whitespace and/or commas:

#

# all - Use all supported protocols.

# cups - Use the CUPS browse protocol.

# slp - Use the SLPv2 protocol.

#

# The default is "cups".

#

# NOTE: If you choose to use SLPv2, it is *strongly* recommended that

# you have at least one SLP Directory Agent (DA) on your

# network. Otherwise, browse updates can take several seconds,

# during which the scheduler will not respond to client

# requests.

#

#BrowseProtocols cups

#

# BrowseAddress: specifies a broadcast address to be used. By

# default browsing information is not sent!

#

# Note: HP-UX does not properly handle broadcast unless you have a

# Class A, B, C, or D netmask (i.e. no CIDR support).

#

# Note: Using the "global" broadcast address (255.255.255.255) will

# activate a Linux demand-dial link with the default configuration.

# If you have a LAN as well as the dial-up link, use the LAN's

# broadcast address.

#

# The @LOCAL address broadcasts to all non point-to-point interfaces.

# For example, if you have a LAN and a dial-up link, @LOCAL would

# send printer updates to the LAN but not to the dial-up link.

# Similarly, the @IF(name) address sends to the named network

# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed

# automatically (no more than once every 60 seconds), so they can

# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.

#

BrowseAddress x.y.z.255

#BrowseAddress x.y.255.255

#BrowseAddress x.255.255.255

#BrowseAddress 255.255.255.255

#BrowseAddress @LOCAL

#BrowseAddress @IF(name)

#

# BrowseShortNames: whether or not to use "short" names for remote printers

# when possible (e.g. "printer" instead of "printer@host".) Enabled by

# default.

#

#BrowseShortNames Yes

#

# BrowseAllow: specifies an address mask to allow for incoming browser

# packets. The default is to allow packets from all addresses.

#

# BrowseDeny: specifies an address mask to deny for incoming browser

# packets. The default is to deny packets from no addresses.

#

# Both "BrowseAllow" and "BrowseDeny" accept the following notations for

# addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The hostname/domainname restrictions only work if you have turned hostname

# lookups on!

#

#BrowseAllow address

#BrowseDeny address

#

# BrowseInterval: the time between browsing updates in seconds. Default

# is 30 seconds.

#

# Note that browsing information is sent whenever a printer's state changes

# as well, so this represents the maximum time between updates.

#

# Set this to 0 to disable outgoing broadcasts so your local printers are

# not advertised but you can still see printers on other hosts.

#

#BrowseInterval 30

#

# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.

#

#BrowseOrder allow,deny

#BrowseOrder deny,allow

#

# BrowsePoll: poll the named server(s) for printers

#

#BrowsePoll address:port

#

# BrowsePort: the port used for UDP broadcasts. By default this is

# the IPP port; if you change this you need to do it on all servers.

# Only one BrowsePort is recognized.

#

BrowsePort 631

#

# BrowseRelay: relay browser packets from one address/network to another.

#

#BrowseRelay source-address destination-address

#BrowseRelay @IF(src) @IF(dst)

#

# BrowseTimeout: the timeout for network printers - if we don't

# get an update within this time the printer will be removed

# from the printer list. This number definitely should not be

# less the BrowseInterval value for obvious reasons. Defaults

# to 300 seconds.

#

#BrowseTimeout 300

#

# ImplicitClasses: whether or not to use implicit classes.

#

# Printer classes can be specified explicitly in the classes.conf

# file, implicitly based upon the printers available on the LAN, or

# both.

#

# When ImplicitClasses is On, printers on the LAN with the same name

# (e.g. Acme-LaserPrint-1000) will be put into a class with the same

# name. This allows you to setup multiple redundant queues on a LAN

# without a lot of administrative difficulties. If a user sends a

# job to Acme-LaserPrint-1000, the job will go to the first available

# queue.

#

# Enabled by default.

#

#ImplicitClasses On

#

# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit

# classes.

#

# When ImplicitAnyClasses is On and a local queue of the same name

# exists, e.g. "printer", "printer@server1", "printer@server1", then

# an implicit class called "Anyprinter" is created instead.

#

# When ImplicitAnyClasses is Off, implicit classes are not created

# when there is a local queue of the same name.

#

# Disabled by default.

#

#ImplicitAnyCLasses Off

#

# HideImplicitMembers: whether or not to show the members of an

# implicit class.

#

# When HideImplicitMembers is On, any remote printers that are

# part of an implicit class are hidden from the user, who will

# then only see a single queue even though many queues will be

# supporting the implicit class.

#

# Enabled by default.

#

#HideImplicitMembers On

########

######## Security Options

########

#

# SystemGroup: the group name for "System" (printer administration)

# access. The default varies depending on the operating system, but

# will be "sys", "system", or "root" (checked for in that order.)

#

#SystemGroup sys

#

# RootCertDuration: How frequently the root certificate is regenerated.

# Defaults to 300 seconds.

#

#RootCertDuration 300

#

# Access permissions for each directory served by the scheduler.

# Locations are relative to DocumentRoot...

#

# AuthType: the authorization to use:

#

# None - Perform no authentication

# Basic - Perform authentication using the HTTP Basic method.

# Digest - Perform authentication using the HTTP Digest method.

#

# (Note: local certificate authentication can be substituted by

# the client for Basic or Digest when connecting to the

# localhost interface)

#

# AuthClass: the authorization class; currently only "Anonymous", "User",

# "System" (valid user belonging to group SystemGroup), and "Group"

# (valid user belonging to the specified group) are supported.

#

# AuthGroupName: the group name for "Group" authorization.

#

# Order: the order of Allow/Deny processing.

#

# Allow: allows access from the specified hostname, domain, IP address,

# network, or interface.

#

# Deny: denies access from the specified hostname, domain, IP address,

# network, or interface.

#

# Both "Allow" and "Deny" accept the following notations for addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

# @LOCAL

# @IF(name)

#

# The host and domain address require that you enable hostname lookups

# with "HostNameLookups On" above.

#

# The @LOCAL address allows or denies from all non point-to-point

# interfaces. For example, if you have a LAN and a dial-up link,

# @LOCAL could allow connections from the LAN but not from the dial-up

# link. Similarly, the @IF(name) address allows or denies from the

# named network interface, e.g. @IF(eth0) under Linux. Interfaces are

# refreshed automatically (no more than once every 60 seconds), so

# they can be used on dynamically-configured interfaces, e.g. PPP,

# 802.11, etc.

#

# Encryption: whether or not to use encryption; this depends on having

# the OpenSSL library linked into the CUPS library and scheduler.

#

# Possible values:

#

# Always - Always use encryption (SSL)

# Never - Never use encryption

# Required - Use TLS encryption upgrade

# IfRequested - Use encryption if the server requests it

#

# The default value is "IfRequested".

#

<Location />

Order Deny,Allow

Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

</Location>

#<Location /classes>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /classes/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /jobs>

#

# You may wish to limit access to job operations, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

## Anonymous access (default)

#AuthType None

## Require a username and password (Basic authentication)

#AuthType Basic

#AuthClass User

## Require a username and password (Digest/MD5 authentication)

#AuthType Digest

#AuthClass User

## Restrict access to local domain

#Order Deny,Allow

#Deny From All

#Allow From .mydomain.com

#</Location>

<Location /admin>

#

# You definitely will want to limit access to the administration functions.

# The default configuration requires a local connection from a user who

# is a member of the system group to do any admin tasks. You can change

# the group name using the SystemGroup directive.

#

AuthType Basic

AuthClass System

## Restrict access to local domain

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

#Encryption Required

</Location>

<Location /printers/printer>

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

AuthType None

</Location>

<Location /printers/hpimp>

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow From 192.168.1.*

Allow From 192.168.2.*

AuthType None

Allow from All

</Location>

Browsing On

BrowseProtocols cups

BrowseOrder Deny,Allow

BrowseAllow from @LOCAL

BrowseAllow from 192.168.1.*

BrowseAllow from 192.168.2.*

BrowseAddress 255.255.255.255

Listen *:631

#

# End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $".

#

# Lines below are automatically generated - DO NOT EDIT

Merci

[rjcb]

J'ai trouvé c'est le drivers qui va pas:

mais pb

J'ai un serveur sous linux avec un serveur d'impression.

Sous xp pro (poste client) je vois l'imprimante et il faux installer les drivers, et donc windows n'a pas le pilote (HP PSC1600) donc je fais parcourir et je met le cd d'install qui est avec l'imprimante.

Le pb c'est qu'il me propose ceci quand je fais parcourir:

il me propose le drivers hp instant share

http://divers.ath.cx/ lien4

Mais ce drives ne marche pas et a chaque fois que j'essaie cela ne marche pas.

Comment intégrer le drivers de mon imprimante

Merci

[rjcb]

Salut

retour au pt de départ

j'ai refais mon cupsd.conf mais pb

#

# "$Id: cupsd.conf.in,v 1.3 2002/02/12 18:47:11 mike Exp $"

#

# Sample configuration file for the Common UNIX Printing System (CUPS)

# scheduler.

#

# Copyright 1997-2002 by Easy Software Products, all rights reserved.

#

# These coded instructions, statements, and computer programs are the

# property of Easy Software Products and are protected by Federal

# copyright law. Distribution and use rights are outlined in the file

# "LICENSE.txt" which should have been included with this file. If this

# file is missing or damaged please contact Easy Software Products

# at:

#

# Attn: CUPS Licensing Information

# Easy Software Products

# 44141 Airport View Drive, Suite 204

# Hollywood, Maryland 20636-3111 USA

#

# Voice: (301) 373-9603

# EMail: cups-info@cups.org

# WWW: http://www.cups.org

#

########################################################################

# #

# This is the CUPS configuration file. If you are familiar with #

# Apache or any of the other popular web servers, we've followed the #

# same format. Any configuration variable used here has the same #

# semantics as the corresponding variable in Apache. If we need #

# different functionality then a different name is used to avoid #

# confusion... #

# #

########################################################################

########

######## Server Identity

########

#

# ServerName: the hostname of your server, as advertised to the world.

# By default CUPS will use the hostname of the system.

#

# To set the default server used by clients, see the client.conf file.

#

ServerName 192.168.2.2

#

# ServerAdmin: the email address to send all complaints/problems to.

# By default CUPS will use "root@hostname".

#

#ServerAdmin root@domaine

########

######## Server Options

########

#

# AccessLog: the access log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/access_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

AccessLog /var/log/cups/access_log

#

# Classification: the classification level of the server. If set, this

# classification is displayed on all pages, and raw printing is disabled.

# The default is the empty string.

#

#Classification classified

#Classification confidential

#Classification secret

#Classification topsecret

#Classification unclassified

#

# ClassifyOverride: whether to allow users to override the classification

# on printouts. If enabled, users can limit banner pages to before or

# after the job, and can change the classification of a job, but cannot

# completely eliminate the classification or banners.

#

# The default is off.

#

#ClassifyOverride off

#

# DataDir: the root directory for the CUPS data files.

# By default "/usr/share/cups".

#

DataDir /usr/share/cups

#

# DefaultCharset: the default character set to use. If not specified,

# defaults to "utf-8". Note that this can also be overridden in

# HTML documents...

#

#DefaultCharset utf-8

DefaultCharset ISO-8859-15

#

# DefaultLanguage: the default language if not specified by the browser.

# If not specified, the current locale is used.

#

DefaultLanguage fr

#

# DocumentRoot: the root directory for HTTP documents that are served.

# By default "/usr/share/cups/doc-root".

#

DocumentRoot /usr/share/cups/doc-root

#

# ErrorLog: the error log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/error_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

ErrorLog /var/log/cups/error_log

#

# FontPath: the path to locate all font files (currently only for pstoraster)

# By default "/usr/share/cups/fonts".

#

FontPath /usr/share/cups/fonts

#

# LogLevel: controls the number of messages logged to the ErrorLog

# file and can be one of the following:

#

# debug2 Log everything.

# debug Log almost everything.

# info Log all requests and state changes.

# warn Log errors and warnings.

# error Log only errors.

# none Log nothing.

#

LogLevel info

#

# MaxLogSize: controls the maximum size of each log file before they are

# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.

#

#MaxLogSize 0

#

# PageLog: the page log file; if this does not start with a leading /

# then it is assumed to be relative to ServerRoot. By default set to

# "/var/log/cups/page_log"

#

# You can also use the special name "syslog" to send the output to the

# syslog file or daemon.

#

PageLog /var/log/cups/page_log

#

# PreserveJobHistory: whether or not to preserve the job history after a

# job is completed, cancelled, or stopped. Default is Yes.

#

PreserveJobHistory No

#

# PreserveJobFiles: whether or not to preserve the job files after a

# job is completed, cancelled, or stopped. Default is No.

#

PreserveJobFiles No

#

# AutoPurgeJobs: automatically purge jobs when not needed for quotas.

# Default is No.

#

AutoPurgeJobs Yes

#

# MaxJobs: maximum number of jobs to keep in memory (active and completed.)

# Default is 500; the value 0 is used for no limit.

#

#MaxJobs 500

#

# Printcap: the name of the printcap file. Default is /etc/printcap.

# Leave blank to disable printcap file generation.

#

Printcap /etc/printcap

#

# PrintcapFormat: the format of the printcap file, currently either

# BSD or Solaris. The default is "BSD".

#

#PrintcapFormat BSD

#PrintcapFormat Solaris

#

# PrintcapGUI: the name of the GUI options panel program to associate

# with print queues under IRIX. The default is "/usr/bin/glpoptions"

# from ESP Print Pro.

#

# This option is only used under IRIX; the options panel program

# must accept the "-d printer" and "-o options" options and write

# the selected printer options back to stdout on completion.

#

#PrintcapGUI /usr/bin/glpoptions

#

# RequestRoot: the directory where request files are stored.

# By default "/var/spool/cups".

#

RequestRoot /var/spool/cups

#

# RemoteRoot: the name of the user assigned to unauthenticated accesses

# from remote systems. By default "remroot".

#

#RemoteRoot remroot

#

# ServerBin: the root directory for the scheduler executables.

# By default "/usr/lib/cups".

#

ServerBin /usr/lib/cups

#

# ServerRoot: the root directory for the scheduler.

# By default "/etc/cups".

#

ServerRoot /etc/cups

########

######## Encryption Support

########

#

# ServerCertificate: the file to read containing the server's certificate.

# Defaults to "/etc/cups/ssl/server.crt".

#

#ServerCertificate /etc/cups/ssl/server.crt

#

# ServerKey: the file to read containing the server's key.

# Defaults to "/etc/cups/ssl/server.key".

#

#ServerKey /etc/cups/ssl/server.key

########

######## Filter Options

########

#

# User/Group: the user and group the server runs under. Normally this

# must be lp and sys, however you can configure things for another

# user or group as needed.

#

# Note: the server must be run initially as root to support the

# default IPP port of 631. It changes users whenever an external

# program is run, or if the RunAsUser directive is specified...

#

#User lp

#Group lp

#

# RIPCache: the amount of memory that each RIP should use to cache

# bitmaps. The value can be any real number followed by "k" for

# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles

# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).

#

#RIPCache 8m

#

# TempDir: the directory to put temporary files in. This directory must be

# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or

# the value of the TMPDIR environment variable.

#

TempDir /var/spool/cups/tmp

#

# FilterLimit: sets the maximum cost of all job filters that can be run

# at the same time. A limit of 0 means no limit. A typical job may need

# a filter limit of at least 200; limits less than the minimum required

# by a job force a single job to be printed at any time.

#

# The default limit is 0 (unlimited).

#

#FilterLimit 0

########

######## Network Options

########

#

# Ports/addresses that we listen to. The default port 631 is reserved

# for the Internet Printing Protocol (IPP) and is what we use here.

#

# You can have multiple Port/Listen lines to listen to more than one

# port or address, or to restrict access:

#

# Port 80

# Port 631

# Listen hostname

# Listen hostname:80

# Listen hostname:631

# Listen 1.2.3.4

# Listen 1.2.3.4:631

#

# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades

# for encryption. If you want to support web-based encryption you'll

# probably need to listen on port 443 (the "https" port...)

#

#Port 80

#Port 443

Port 631

#

# HostNameLookups: whether or not to do lookups on IP addresses to get a

# fully-qualified hostname. This defaults to Off for performance reasons...

#

#HostNameLookups On

#

# KeepAlive: whether or not to support the Keep-Alive connection

# option. Default is on.

#

KeepAlive On

#

# KeepAliveTimeout: the timeout before Keep-Alive connections are

# automatically closed. Default is 60 seconds.

#

KeepAliveTimeout 60

#

# MaxClients: controls the maximum number of simultaneous clients that

# will be handled. Defaults to 100.

#

MaxClients 100

#

# MaxRequestSize: controls the maximum size of HTTP requests and print files.

# Set to 0 to disable this feature (defaults to 0.)

#

#MaxRequestSize 0

#

# Timeout: the timeout before requests time out. Default is 300 seconds.

#

#Timeout 300

########

######## Browsing Options

########

#

# Browsing: whether or not to broadcast and/or listen for CUPS printer

# information on the network. Enabled by default.

#

#Browsing Off

#

# BrowseProtocols: which protocols to use for browsing. Can be

# any of the following separated by whitespace and/or commas:

#

# all - Use all supported protocols.

# cups - Use the CUPS browse protocol.

# slp - Use the SLPv2 protocol.

#

# The default is "cups".

#

# NOTE: If you choose to use SLPv2, it is *strongly* recommended that

# you have at least one SLP Directory Agent (DA) on your

# network. Otherwise, browse updates can take several seconds,

# during which the scheduler will not response to client

# requests.

#

#BrowseProtocols cups

#

# BrowseAddress: specifies a broadcast address to be used. By

# default browsing information is not sent!

#

# Note: HP-UX does not properly handle broadcast unless you have a

# Class A, B, C, or D netmask (i.e. no CIDR support).

#

# Note: Using the "global" broadcast address (255.255.255.255) will

# activate a Linux demand-dial link with the default configuration.

# If you have a LAN as well as the dial-up link, use the LAN's

# broadcast address.

#

#BrowseAddress x.y.z.255

#BrowseAddress x.y.255.255

#BrowseAddress x.255.255.255

#BrowseAddress 255.255.255.255

#

# BrowseShortNames: whether or not to use "short" names for remote printers

# when possible (e.g. "printer" instead of "printer@host".) Enabled by

# default.

#

#BrowseShortNames Yes

#

# BrowseAllow: specifies an address mask to allow for incoming browser

# packets. The default is to allow packets from all addresses.

#

# BrowseDeny: specifies an address mask to deny for incoming browser

# packets. The default is to deny packets from no addresses.

#

# Both "BrowseAllow" and "BrowseDeny" accept the following notations for

# addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

#

# The hostname/domainname restrictions only work if you have turned hostname

# lookups on!

#

#BrowseAllow address

#BrowseDeny address

#

# BrowseInterval: the time between browsing updates in seconds. Default

# is 30 seconds.

#

# Note that browsing information is sent whenever a printer's state changes

# as well, so this represents the maximum time between updates.

#

# Set this to 0 to disable outgoing broadcasts so your local printers are

# not advertised but you can still see printers on other hosts.

#

#BrowseInterval 30

#

# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.

#

#BrowseOrder allow,deny

#BrowseOrder deny,allow

#

# BrowsePoll: poll the named server(s) for printers

#

#BrowsePoll address:port

#

# BrowsePort: the port used for UDP broadcasts. By default this is

# the IPP port; if you change this you need to do it on all servers.

# Only one BrowsePort is recognized.

#

BrowsePort 631

#

# BrowseRelay: relay browser packets from one address/network to another.

#

#BrowseRelay source-address destination-address

#

# BrowseTimeout: the timeout for network printers - if we don't

# get an update within this time the printer will be removed

# from the printer list. This number definitely should not be

# less the BrowseInterval value for obvious reasons. Defaults

# to 300 seconds.

#

#BrowseTimeout 300

#

# ImplicitClasses: whether or not to use implicit classes.

#

# Printer classes can be specified explicitly in the classes.conf

# file, implicitly based upon the printers available on the LAN, or

# both.

#

# When ImplicitClasses is On, printers on the LAN with the same name

# (e.g. Acme-LaserPrint-1000) will be put into a class with the same

# name. This allows you to setup multiple redundant queues on a LAN

# without a lot of administrative difficulties. If a user sends a

# job to Acme-LaserPrint-1000, the job will go to the first available

# queue.

#

# Enabled by default.

#

#ImplicitClasses On

#

# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit

# classes.

#

# When ImplicitAnyClasses is On and a local queue of the same name

# exists, e.g. "printer", "printer@server1", "printer@server1", then

# an implicit class called "Anyprinter" is created instead.

#

# When ImplicitAnyClasses is Off, implicit classes are not created

# when there is a local queue of the same name.

#

# Disabled by default.

#

#ImplicitAnyCLasses Off

#

# HideImplicitMembers: whether or not to show the members of an

# implicit class.

#

# When HideImplicitMembers is On, any remote printers that are

# part of an implicit class are hidden from the user, who will

# then only see a single queue even though many queues will be

# supporting the implicit class.

#

# Enabled by default.

#

#HideImplicitMembers On

########

######## Security Options

########

#

# SystemGroup: the group name for "System" (printer administration)

# access. The default varies depending on the operating system, but

# will be "sys", "system", or "root" (checked for in that order.)

#

SystemGroup lpadmin

#

# Access permissions for each directory served by the scheduler.

# Locations are relative to DocumentRoot...

#

# AuthType: the authorization to use:

#

# None - Perform no authentication

# Basic - Perform authentication using the HTTP Basic method.

# Digest - Perform authentication using the HTTP Digest method.

#

# (Note: local certificate authentication can be substituted by

# the client for Basic or Digest when connecting to the

# localhost interface)

#

# AuthClass: the authorization class; currently only "Anonymous", "User",

# "System" (valid user belonging to group SystemGroup), and "Group"

# (valid user belonging to the specified group) are supported.

#

# AuthGroupName: the group name for "Group" authorization.

#

# Order: the order of Allow/Deny processing.

#

# Allow: allows access from the specified hostname, domain, IP address, or

# network.

#

# Deny: denies access from the specified hostname, domain, IP address, or

# network.

#

# Both "Allow" and "Deny" accept the following notations for addresses:

#

# All

# None

# *.domain.com

# .domain.com

# host.domain.com

# nnn.*

# nnn.nnn.*

# nnn.nnn.nnn.*

# nnn.nnn.nnn.nnn

# nnn.nnn.nnn.nnn/mm

# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm

#

# The host and domain address require that you enable hostname lookups

# with "HostNameLookups On" above.

#

# Encryption: whether or not to use encryption; this depends on having

# the OpenSSL library linked into the CUPS library and scheduler.

#

# Possible values:

#

# Always - Always use encryption (SSL)

# Never - Never use encryption

# Required - Use TLS encryption upgrade

# IfRequested - Use encryption if the server requests it

#

# The default value is "IfRequested".

#

<Location />

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow from 192.168.1.2

Allow from 192.168.2.2

</Location>

#<Location /classes>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /classes/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

#</Location>

#<Location /printers/name>

#

# You may wish to limit access to printers and classes, either with Allow

# and Deny lines, or by requiring a username and password.

#

## Anonymous access (default)

#AuthType None

## Require a username and password (Basic authentication)

#AuthType Basic

#AuthClass User

## Require a username and password (Digest/MD5 authentication)

#AuthType Digest

#AuthClass User

## Restrict access to local domain

#Order Deny,Allow

#Deny From All

#Allow From .mydomain.com

#</Location>

<Location /admin>

#

# You definitely will want to limit access to the administration functions.

# The default configuration requires a local connection from a user who

# is a member of the system group to do any admin tasks. You can change

# the group name using the SystemGroup directive.

#

AuthType Basic

AuthClass System

## Restrict access to local domain

Order Deny,Allow

#Deny From All

Allow From 127.0.0.1

Allow from 192.168.1.2

Allow from 192.168.2.2

#Encryption Required

</Location>

#Brwosing On

#BrowseOrder Deny,Allow

#BrowseAllow from @LOCAL

#BrowseAddress 255.255.255.255

#Lsiten*:631

#

# End of "$Id: cupsd.conf.in,v 1.3 2002/02/12 18:47:11 mike Exp $".

#

Avec ceci je n'arrive pas a accéder à http://localhost:631

L'@ 192.168.2.2 coresspond a la machine ou est cups et 192.168.1.2 est l'@ du client qui voudrais utiliser l'imprimante.

Dans les deux cas imporssible d'accéder a la page.

Autrement j'ai bien décommenter la ligne des ficihers mime.

Merci

[rjcb]

J'ai enfin réussi pour que cela fonctionne.

Par contre juste une petite question?

Comment faire pour numériser une image a partir de l'imprimante ss linux sachant que le logiciel est ss windows (livré ac l'imprimante HP)

Utiliser un émulateur ou il y a une solution plus facile?

Merci