djyosono Posted March 1, 2004 Share Posted March 1, 2004 voila je viens de recuperre les derniers firmwares pour mes 2 graveurs (yamaha et Pioneer) . Mias je ne sais pas ce qu'il faut faire pour les installer. Qq'un peut m'aider? Link to comment Share on other sites More sharing options...
bastou94 Posted March 1, 2004 Share Posted March 1, 2004 va sur le site des fabricants, et tu télécharges tout simplement les fameux fichiers ! Si le fabricant n'est pas trop nul, ce seront des fichiers exécutables sur lesquels il te suffira de cliquer. ATTENTION aux coupures de courant pendant l'opération, qui pourraient être fatales........... Link to comment Share on other sites More sharing options...
djyosono Posted March 1, 2004 Author Share Posted March 1, 2004 Poir le Pioneer c'est fait mais pour mon Yamaha CrwF1...j'ai un simle fichier executable .....j'ai essaye de l'installer mais l'update n'est visiblement pas prises en compte.Help! Link to comment Share on other sites More sharing options...
gallean Posted March 1, 2004 Share Posted March 1, 2004 parfois les firmware n'acceptent de s'installer que sur un lecteur en maitre seul donc essais de brancher ton yam en IDE2 et tout seul (en repositionnant le jumper), ca m'a fait plusieurs fois le coups, une autre chose, tu passes bien par une disquette de boot ? Link to comment Share on other sites More sharing options...
LEOSURFE Posted March 1, 2004 Share Posted March 1, 2004 si c'est le cdrw-f1 (pas la version black) le firmware se trouve la http://www.yamaha-service.de/service-downl...rw/af110g_e.exe a décompresse et dedans ya un fichier readme.txt extrait du fichier readme * For Windows 2000/XP user 0. <This step is for Windows 2000 and XP user - in this case, the drive is connected to the secondary IDE cable as slave> Open the "Control Panel" and double-click on the "System" icon. Select the "Hardware" tab and click on "Device Manager". And click the "IDE ATA/ATAPI controllers" icon to open the "Secondary IDE Channel" window. Then double-click the "Advanced Settings" tab. Then choose "PIO Only" to uncheck "DMA" option. 1. Open the folder of the installer and double-click [wininst.exe] to start the installer utility program. 2. Please make sure CRW-F1 is chosen as target drive (the drive to upgrade the firmware) in the dialogue. 3. The target firmware version shows the firmware version of the recorder you have at this moment. The source firmware version shows the latest version of the firmware for the recorder and the file name of the program. 4. Click [update] to start the upgrade process. 5. The progress bar goes on to the end and the message "The firmware has installed successfully" will appear. 6. Reboot both the PC and the recorder to complete the upgrade process. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.