Joge Posté(e) le 7 janvier 2007 Partager Posté(e) le 7 janvier 2007 Salut tt le monde ! Bon voila, j'ai un probleme qui a l'air assez frequent on dirai, c'est l'installation et la configuration du wifi sous Mandriva Free 2007 (pas de Powerpack donc). Ma carte est une MSI PC54G3 (avec donc le chipset RT61 de Ralink), j'ai telecharger les pilotes directement chez Ralink en version x86-64 (j'ai un athlon X2). J'ai suivi la procedure d'install mais au moment de faire "load /sbin/insmod rt61.ko" il me dit que ra0 n'existe pas J'ai essayé tout un tas de chose que j'ai pu trouver sur google mais pas moyen... La je sais plus trop quoi faire Merci de m'aider @+ Lien vers le commentaire Partager sur d’autres sites More sharing options...
tyrann27 Posté(e) le 7 janvier 2007 Partager Posté(e) le 7 janvier 2007 Fais un ifconfig -a pour voir si tu n'as pas une nouvelle interface quand meme et aussi un dmesg pour voir si ya pas des erreus hardware... Lien vers le commentaire Partager sur d’autres sites More sharing options...
Joge Posté(e) le 7 janvier 2007 Auteur Partager Posté(e) le 7 janvier 2007 Merci tyrann de m'aider J'ai fais un ifconfig -a, y a pas de ra0, mais il y a bien mes deux autre reseau integrer a la CM et le firewire. Le dmesg donne une bonne tartine de texte que j'arrive pas a dechiffrer Voici le resultat : Bootdata ok (command line is BOOT_IMAGE=linux root=805 resume=/dev/sda6 splash=silent) Linux version 2.6.17-5mdv (rtp@ramanujan.mandriva.com) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:28:02 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7c80 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9cc0 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9c00 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000007fff0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000007fff0000 On node 0 totalpages: 515744 DMA zone: 2679 pages, LIFO batch:0 DMA32 zone: 513065 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Checking aperture... CPU 0: aperture @ ea78000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found SMP: Allowing 2 CPUs, 0 hotplug CPUs Built 1 zonelists Kernel command line: BOOT_IMAGE=linux root=805 resume=/dev/sda6 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Disabling vsyscall due to use of PM timer time.c: Using 3.579545 MHz WALL PM GTOD PM timer. time.c: Detected 2010.341 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2059720k/2097088k available (2696k kernel code, 36980k reserved, 990k data, 220k init) Calibrating delay using timer specific routine.. 4023.71 BogoMIPS (lpj=8047437) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0(2) -> Node 0 -> Core 0 SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 463k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Using local APIC timer interrupts. result 12564646 Detected 12.564 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4020.97 BogoMIPS (lpj=8041947) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1(2) -> Node 0 -> Core 1 AMD Athlon 64 X2 Dual Core Processor 3800+ stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -76 cycles, maxerr 564 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=275 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 0:18 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: d6000000-d7ffffff PREFETCH window: 88000000-880fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: 9000-9fff MEM window: d0000000-d2ffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:0e.0 IO window: 8000-8fff MEM window: d3000000-d5ffffff PREFETCH window: b0000000-bfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1168204267.300:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc20010100000, using 3750k, total 262144k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 124058 bytes,<6>...found (800x600, 124010 bytes, v3). Console: switching to colour frame buffer device 93x31 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 © Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: TSSTcorpDVD-ROM TS-H352A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2K ACPI: (supports S0 S1 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 220k freed SCSI subsystem initialized libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 217 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 217 ata1: SATA link up 1.5 Gbps (SStatus 113) input: AT Translated Set 2 keyboard as /class/input/input0 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:407f ata1: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113) ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f69 84:4773 85:7c68 86:3e01 87:4763 88:407f ata2: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata2: dev 0 configured for UDMA/133 scsi1 : sata_nv Vendor: ATA Model: ST3120026AS Rev: 3.05 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6V160E0 Rev: VA11 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 225 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 225 ata3: SATA link down (SStatus 0) scsi2 : sata_nv ata4: SATA link down (SStatus 0) scsi3 : sata_nv SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 233, io mem 0xd8004000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 GSI 20 sharing vector 0x3A and IRQ 20 ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[d7010000-d70107ff] Max Packet=[2048] IR/IT contexts=[4/8] usb 1-1: new low speed USB device using ohci_hcd and address 2 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure usb 1-1: configuration #1 chosen from 1 choice usb 1-3: new full speed USB device using ohci_hcd and address 3 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 4 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000b0bb25] usb 1-3.1: new full speed USB device using ohci_hcd and address 4 usb 1-3.1: configuration #1 chosen from 1 choice usb 1-3.2: new full speed USB device using ohci_hcd and address 5 usb 1-3.2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Microsoft Microsoft Trackball Optical as /class/input/input1 input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical] on usb-0000:00:02.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com ts: Compaq touchscreen protocol output Linux video capture interface: v1.00 quickcam: QuickCam USB camera found (driver version QuickCam USB 0.6.4 $Date: 2006/05/06 03:00:26 $) quickcam: Kernel:2.6.17-5mdv bus:1 class:FF subclass:FF vendor:046D product:0850 EXT3 FS on sda5, internal journal quickcam: Sensor VV6410 detected quickcam: Registered device: /dev/video0 usbcore: registered new driver quickcam Adding 4088500k swap on /dev/sda6. Priority:-1 extents:1 across:4088500k kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE]. NTFS volume version 3.1. NTFS volume version 3.1. loop: loaded (max 8 devices, max 1 partitions per device) hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) PCI: Enabling device 0000:00:04.0 (0000 -> 0003) ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:04.0 to 64 NET: Registered protocol family 17 intel8x0_measure_ac97_clock: measured 58685 usecs intel8x0: clocking to 46948 cdrom: This disc doesn't have any tracks I recognize! usbcore: registered new driver snd-usb-audio forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 eth0: no link during initialization. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver nvidia: module license 'NVIDIA' taints kernel. PCI: Enabling device 0000:02:00.0 (0000 -> 0003) ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 21 sharing vector 0x42 and IRQ 21 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 GSI 22 sharing vector 0x4A and IRQ 22 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006 bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 0 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 12533 bytes, v3). bootsplash: status on console 5 changed to on compiz[3625]: segfault at 0000000000000014 rip 0000000000411e4d rsp 00007fff95c545d0 error 4 usb 1-9: new full speed USB device using ohci_hcd and address 6 usb 1-9: configuration #1 chosen from 1 choice floppy0: no floppy controllers found floppy0: no floppy controllers found ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 GSI 23 sharing vector 0x52 and IRQ 23 ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 82 skge 1.5 addr 0xd7008000 irq 82 chip Yukon-Lite rev 9 skge eth1: addr 00:17:31:a7:bc:b1 skge eth1: enabling interface ADDRCONF(NETDEV_UP): eth1: link is not ready skge eth1: disabling interface skge eth1: enabling interface ADDRCONF(NETDEV_UP): eth1: link is not ready eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready Désolé pour la longueur je savais pas trop se qui etait inutile Autre info, je suis aller dans "Reconfigurer une interface reseau" et là ra0 apparé avec la bonne adresse IP Mais si je vais dans "Configurer..." et que je choisi "Sans fil" il me propose juste d'installer un nouveau pilote avec ndiswrapper. Encore autre chose dans la barre des taches, si je clique droit sur l'icone reseau il me propse d'activé le ra0, ce que j'ai essayé et qui, on s'en doutai , ne marche pas. Donc voila ! Merci encore pour votre aide, j'aimerai enfin pouvoir avoir le net pour pouvoir dire adieu a windows Lien vers le commentaire Partager sur d’autres sites More sharing options...
tyrann27 Posté(e) le 7 janvier 2007 Partager Posté(e) le 7 janvier 2007 Cela releve dejs trop des mandriviens... Je ne saurais pas t'aider plus, peut-etre _plouf_ Attend un peu... Lien vers le commentaire Partager sur d’autres sites More sharing options...
Joge Posté(e) le 9 janvier 2007 Auteur Partager Posté(e) le 9 janvier 2007 Personne pour m'aider ? Quelque precision supplementaire, au demarage il essaie d'initialisé ra0 avec rt61 mais il me dit que la carte n'est pa presente ! Pourtant j'ai installé le dernier pci.ids et quand je fais un lspci ma carte apparait bien. J'ai essayé de refaire l'install en faisant "make clean" avant de faire "make all" mais toujours le meme probleme. J'ai pas de fichier rt61.ko donc pour en faire un load insmod c'est dur Je sais pas si ce fichier doit etre crée ou si il doit etre present dans l'archive des pilotes... Merci de m'aider Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Archivé
Ce sujet est désormais archivé et ne peut plus recevoir de nouvelles réponses.