Jump to content

Archived

This topic is now archived and is closed to further replies.

genesian

THINK PAD600 MESS ERREUR (error192)

Recommended Posts

hello tout le monde...!

J'ai un probleme avec mon thinkpad 600 300mhz. Lorsque je l'allume il emet un ou deux bips et me met : ERROR 192.:keskidit:

Qd je fais des tests :

1-il m'affiche ça pour le SYSTEMBOARD : ->DEV001

->ERR96

->FRU 3810

qd je teste la memoire il plante (inactif).

sinon qd je teste le reste ça me met OK

j'ai beau faire des tests et redémarrer il me met toujours ce message...c bizarre car hier apres avoir effectué des tests il avait pu lancer win98...mais apres qq minutes il s'etait mis en veille (ou tout comme) seulement j'ai eu beau essayer d'appuyer sur le clavier, de bouger la souris impossible de le rendre actif a nouveau...(plantage)...

quelqu'un aurait une idée?

PLEASE HEEEEELP !!!! :roll:

Share this post


Link to post
Share on other sites
Hi WaveMan,

192 Error on a IBM Thinkpad 600 is due to CMOS Battery weak. The CMOS battery is a 3V CR2025 Lithium Battery. The mininum voltage for the battery to consider operational is 2.5V and above, your battery voltage of .5 to 1V is way below the mininum requirement. The CMOS circuit is some how connect to the CPU Fan, when the CMOS battery is weak the CPU fan will not spin on startup. Replace the CMOS battery and the CPU fan with spin on startup (Under normal operation the CPU fan spin on startup for a short period of time, it then stop and start spinning when the CPU heat up.)

Bon, j'ai trouvé ça, en gros, ta pile bios est morte, il suffit de la changer!

Share this post


Link to post
Share on other sites
Hi WaveMan,

192 Error on a IBM Thinkpad 600 is due to CMOS Battery weak. The CMOS battery is a 3V CR2025 Lithium Battery. The mininum voltage for the battery to consider operational is 2.5V and above, your battery voltage of .5 to 1V is way below the mininum requirement. The CMOS circuit is some how connect to the CPU Fan, when the CMOS battery is weak the CPU fan will not spin on startup. Replace the CMOS battery and the CPU fan with spin on startup (Under normal operation the CPU fan spin on startup for a short period of time, it then stop and start spinning when the CPU heat up.)

Bon, j'ai trouvé ça, en gros, ta pile bios est morte, il suffit de la changer!

Merkiiiiii.... :D

vais en racheter une...:pleure:

Share this post


Link to post
Share on other sites

×
×
  • Create New...